[member=8]Butterfly[/member] ustam, herhangibir servisi devredışı bırakıyorum, uçbirimde devredışı olduğunu ve sürenin azaldığını gösteriyor ama gerçekte sürede hiç bir fark olmuyor.
Bütün dağıtım ve oturumlarda aynı ilginç olayı görüyorum, bu çelişkili sonuca çözüm bulmak için çok araştırmalar yaptım, sudo systemctl disable filan-service komutundan başka birşey bulamadım.
Örneğin bu servis apt-daily.service açılışta 38 saniye gibi bir zaman alıyor, devredışı bıraksam da nafile.
Buna genel olarak bildiğin veya fikir verebileceğin bir şey var mı?
Ustam sorun genel ama ben şimdiki çıktıları vereyim belki yardımcı olur.
tez@tez:~$ dmesg | nc termbin.com 9999
https://termbin.com/yncw
tez@tez:~$
tez@tez:~$ systemd-analyze --no-pager blame
10.900s dev-sda3.device
5.795s keyboard-setup.service
5.765s systemd-journal-flush.service
5.429s systemd-tmpfiles-setup-dev.service
4.575s systemd-tmpfiles-setup.service
4.412s apparmor.service
3.874s systemd-networkd-wait-online.service
3.404s systemd-networkd.service
2.308s NetworkManager.service
2.220s ModemManager.service
2.053s udisks2.service
1.682s accounts-daemon.service
1.463s networkd-dispatcher.service
988ms polkit.service
886ms grub-common.service
829ms wpa_supplicant.service
565ms lightdm.service
562ms apport.service
560ms systemd-sysctl.service
556ms plymouth-quit-wait.service
553ms avahi-daemon.service
347ms systemd-journald.service
292ms systemd-udevd.service
263ms kmod-static-nodes.service
254ms systemd-logind.service
249ms dev-disk-by\x2duuid-1555aafd\x2d90bb\x2d428c\x2d9b45\x2d78ef00274955.swap
248ms systemd-update-utmp.service
236ms systemd-modules-load.service
235ms virtualbox.service
233ms systemd-remount-fs.service
230ms plymouth-read-write.service
204ms user[member=3516]1[/member]000.service
181ms dev-mqueue.mount
178ms dev-hugepages.mount
166ms NetworkManager-wait-online.service
160ms ufw.service
154ms systemd-udev-trigger.service
152ms systemd-timesyncd.service
146ms systemd-resolved.service
109ms sys-kernel-debug.mount
69ms systemd-random-seed.service
66ms setvtrgb.service
49ms rsyslog.service
42ms systemd-tmpfiles-clean.service
38ms plymouth-start.service
30ms alsa-restore.service
18ms pppd-dns.service
10ms ureadahead-stop.service
10ms systemd-update-utmp-runlevel.service
10ms sys-fs-fuse-connections.mount
9ms systemd-user-sessions.service
6ms console-setup.service
4ms sys-kernel-config.mount
tez@tez:~$
tez@tez:~$ journalctl --no-pager -b -p3
-- Logs begin at Thu 2019-10-31 19:04:42 +03, end at Thu 2019-10-31 19:46:45 +03. --
Eki 31 19:22:14 tez kernel: ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20170831/nsarguments-198)
Eki 31 19:22:14 tez kernel: ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dsfield-212)
Eki 31 19:22:14 tez kernel: ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20170831/psparse-550)
tez@tez:~$
tez@tez:~$ systemd-analyze time
Startup finished in 36.918s (kernel) + 16.072s (userspace) = 52.990s
graphical.target reached after 16.057s in userspace
tez@tez:~$
tez@tez:~$ systemctl --no-pager --state=failed
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
tez@tez:~$
The time the unit takes to start is printed after the "+" character.
graphical.target [member=3516]1[/member]6.057s
└─multi-user.target [member=3516]1[/member]6.056s
└─getty.target [member=3516]1[/member]6.056s
└─getty@tty1.service [member=3516]1[/member]6.056s
└─system-getty.slice [member=3516]1[/member]6.055s
└─setvtrgb.service [member=3516]1[/member]5.987s +66ms
└─systemd-user-sessions.service [member=3516]1[/member]5.413s +9ms
└─network.target [member=3516]1[/member]5.411s
└─NetworkManager.service [member=3516]1[/member]3.102s +2.308s
└─dbus.service [member=3516]1[/member]2.644s
└─basic.target [member=3516]1[/member]2.631s
└─sockets.target [member=3516]1[/member]2.631s
└─avahi-daemon.socket [member=3516]1[/member]2.631s
└─sysinit.target [member=3516]1[/member]2.592s
└─systemd-update-utmp.service [member=3516]1[/member]2.343s +248ms
└─systemd-tmpfiles-setup.service @7.765s +4.575s
└─systemd-journal-flush.service [member=3516]1[/member].997s +5.765s
└─systemd-journald.service [member=3516]1[/member].646s +347ms
└─systemd-journald.socket [member=3516]1[/member].637s
└─system.slice [member=3516]1[/member].636s
└─-.slice [member=3516]1[/member].621s
tez@tez:~$
tez@tez:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# /
UUID=14b7563a-8b22-4639-ab15-0e217d719084 / ext4 noatime,errors=remount-ro 0 1
# SWAP
UUID=1555aafd-90bb-428c-9b45-78ef00274955 none swap sw 0 0
tez@tez:~$
tez@tez:~$ sudo blkid
[sudo] password for tez:
/dev/sda1: UUID="0e3b8c32-405b-4550-96c4-c458f181c9a1" TYPE="ext4" PARTUUID="951317fb-01"
/dev/sda2: UUID="7ccd4b95-0374-4f0a-81c3-da07c888da78" TYPE="ext4" PARTUUID="951317fb-02"
/dev/sda3: LABEL="SB@" UUID="14b7563a-8b22-4639-ab15-0e217d719084" TYPE="ext4" PARTUUID="951317fb-03"
/dev/sda4: UUID="1555aafd-90bb-428c-9b45-78ef00274955" TYPE="swap" PARTUUID="951317fb-04"
/dev/sdb1: LABEL="FORM" UUID="ECE8-6834" TYPE="vfat" PARTUUID="e77f089c-01"
tez@tez:~$
