Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: dbedel - 27 Aralık 2019, 09:20:57
-
Arkadaşlar eski bir ekran kartı kullanıyorum nvidia 710m. Sürücülerden yada apt install olarak birçok şekilde denedim hiçbirinde ekran kartı kurulmadı. kurulsa da nvidia-smi yada nvidia-settings te görülmedi. Çalışmıyor olarak görünüyor. Driver manager'den kurduğum zaman ise reboot sonrasında ekran açılmıyor. lightdm sisteminde sorun var sanırım. Nasıl halledebilirim bunu böyle bir sorunla karşılaşan var mı ?
deniz[member=424]deniz[/member]-PC:~$ lsb_release -a
No LSB modules are available.
Distributor ID: LinuxMint
Description: Linux Mint 19.3 Tricia
Release: 19.3
Codename: tricia
deniz[member=424]deniz[/member]-PC:~$ lspci -nnk | egrep "VGA|3D|Display" -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
Subsystem: Acer Incorporated [ALI] 3rd Gen Core processor Graphics Controller [1025:064b]
Kernel driver in use: i915
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev a1)
Subsystem: Acer Incorporated [ALI] GeForce 710M [1025:0691]
Kernel driver in use: nouveau
deniz[member=424]deniz[/member]-PC:~$ glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fog_distance,
GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,
deniz[member=424]deniz[/member]-PC:~$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1366x768 60.01*+
1360x768 59.80 59.96
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
deniz[member=424]deniz[/member]-PC:~$ dpkg -l | grep -E "nvidia|bumblebee|nvidia-prime|fglrx"
ii nvidia-prime-applet 1.0.8 all An applet for NVIDIA Prime
deniz[member=424]deniz[/member]-PC:~$ inxi -G
Graphics:
Device-1: Intel 3rd Gen Core processor Graphics driver: i915 v: kernel
Device-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT
620M/625M/630M/720M]
driver: nouveau v: kernel
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile v: 4.2 Mesa 19.0.8
Şu an hiçbirşey yok format attım bıraktım. Ekranda kırılmalar olmasa hıç uğraşmayacaktım ama hem kırılmalar oluyor hemde bir 2 pencere açınca çok yavaşlıyor.
Düzenleme: Konu başlığı
-
Hangi sürümü kurmaya çalışıyorsunuz?
Kurmanız gereken 390 sürümü , Fermi gpu'lar en son onu destekliyor.
Bu arada sanıyorum bu bir laptop. Secure boot'u devre dışı bırakın bios'tan. Bazı durumlarda Nvidia sürücüsünün sistem açılışında yüklenmesini engelliyor.
-
Aynen hocam laptoptan deniyorum.
secoure boot sekmesi kilitli boot menusunden degistiremedim daha oncede aklima gelmisti ama neden kilitli hic bilmyiroum ^^
deniz[member=424]deniz[/member]-PC:~$ sudo apt search nvidia-driver
[sudo] password for deniz:
p nvidia-driver-390 - NVIDIA driver metapackage
p nvidia-driver-390:i386 - NVIDIA driver metapackage
p nvidia-driver-418 - Transitional package for nvidia-driver-430
p nvidia-driver-430 - NVIDIA driver metapackage
p nvidia-driver-435 - NVIDIA driver metapackage
v nvidia-driver-binary -
v nvidia-driver-binary:i386
hepsini sira sira denedim ^_^ olmadi
-
Bunu buldum.
Acer Ana kartlar da devre dışı bırakmak için, Güvenlik ekranında şifre oluşturma ekranı var. Şifre oluşturduktan sonra, sistemi yeniden başlatıp oluşturduğun şifre ile BIOS'a girersen seçeceğin aktif olduğunu göreceksin. Başarılar.
Sanırım Acer'in kendine has gıcıklığı. Hackintosh ile ilgili bir forumdan.
-
^_^ aynisina bakip kapattım az once bende . Şimdi ne yapayim nasıl yükleneliyim? apt install nvidia-drive390 nvidia-settings fark yaratır mı secure bootu kapatinca?
-
Ister komutla kurun ister arayuzden, bir farkı olacağını sanmıyorum. Aynı işlem.
-
Driver manager de yok 390. nvidia-340 var.
Komutla kurdum yine olmadı siyah ekran sol en üst köşede bir tane alt tire (_) var.
Mesajlar Birleştirildi.
sudo service lightdm stop ve start da açmıyor. kernel li 4.18 e çekip denesem mi acaba?
Mesajlar Birleştirildi.
lightdm yi silip
sudo apt remove lightdm* —purge
sudo apt install lightdm*
sudo dpkg-reconfigure lightdm
İle yukledikten sonra da olmadi
sudo lightdm —test-mode —debug
Çıktısı ise en altta
failed to use bus name org.freedesktop.displaymanager do you have appropriate permissions
Diye bir sey diyor bunu bir türlü çözemedim ne yaptiysam olmadi ^^ bilen var mı
-
Aşağıdaki komutun çıktısını paylaşınız.
ubuntu-drivers list
-
Kusura bakmayin okuldaydim
deniz[member=424]deniz[/member]-PC:~$ ubuntu-drivers list
nvidia-340
Fakat farketmiyor nvidia-driver-390 veya nvidia-340 ikisinde de lightdm acilmiyor
-
Sorun LightDM ile ilgili değil. Ayrıca sanırım aygıtınız Nvidia-390 sürücüsünü desteklemiyor (ya da farklı bir durum var). Nvidia-340 tarafındaysa sorun Xorg 1.20.x sürümünden kaynaklanıyor. Nvidia-340.117 sürücüsünün Xorg 1.20 desteği yok. Bu durumda aşağıdaki komutla Xorg sürümünü düşürüp, Nvidia-340 sürücüsünü kullanmayı deneyebilirsiniz. Ardından sisteminizi yeniden başlatın ya da CTRL+ALT+ESC tuşları ile X sunucusunu yeniden başlatmayı deneyebilirsiniz.
sudo apt install --install-recommends xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-video-all
Nvidia sitesinde Xorg 1.20.x desteği olan Nvidia-340.1080 sürücüsü yayınlandı. Bir süre sonra depoya girerse Xorg 1.20.x sürüme geçiş yapabilirsiniz.
Düzenleme: Güncel sürüm numarası düzeltildi.
-
Yok olmadı ben kernel i felan değirtmiştim bir sürü şey indirdim kaldırdım bi format atayım oyle deneyeyim zaten çözünürlük felan hep bozuldu yüksek çözürlüğe getiremiyorum. Sizin verdiğiniz alttaki komutu surucu yükledikten sonra mı girmeliyim yoksa reboot yaptıktan sonra mı?
-
Yeniden kurulum yapacaksanız, Linux Mint 19.2 sürümü deneyin. Linux Mint 19.2 sürüm Xorg 1.19.x ile geliyor. Nvidia-340'ın depodaki sürümü, çekideğin 5.3.x serisi için dahi yamalı. Ama işin içine X sunucusu girince, durum karışıyor.
apt changelog
nvidia-graphics-drivers-340 (340.107-0ubuntu0.18.04.4) bionic; urgency=medium
* debian/templates/dkms_nvidia.conf.in:
debian/patches/buildfix_kernel_5.3.patch:
- Backport kernel compatibility fixes (LP: #1853015).
-- Alberto Milone <alberto.milone@canonical.com> Mon, 18 Nov 2019 16:11:16 +0100
-
Peki 19.2 yi indireceğim. Nvidia-340 çok eski değil mi? Bunu yükseldikten sonra ekranda kirilmalar vs yapar mı hocam? Bir de kurulun tamamlandıktan sonra ne birsey yapmam gerekiyor mu? Yada daha öncesinde?
-
Siz bir kurulum yapın ve aşağıdaki komutun çıktılarını paylaşın. Sonrasına ardından bakarız. Diğer soru ve olası sorunlar başka bir konuda cevaplanabilirler.
ubuntu-drivers list
Aslında sizin cihazınızın Nvidia-390 sürücüsünü desteklemesi gerekirdi. Belki yaptığınız bir düzenleme bu sonuca neden olmuştur.
-
Ubuntu kullanırken destekliyordu. Hatırladığım kadarı ile sadece apt install ile kurmuştum tek seferde çalışmıştı. Ama orda da yazmiyordu ubuntu-drive listte destekleniyor diye. Ben internetten bakmıştım 390 yukledim geçtim ^^ Bilgisayar eski olunca artık yavaş yavaş driverlar da güncelliğini yitiriyor sanırım ^^
Mesajlar Birleştirildi.
Kurulumu ve guncellestirmelri gerceklestirdim
deniz[member=424]deniz[/member]-PC:~$ lsb_release -a
No LSB modules are available.
Distributor ID: LinuxMint
Description: Linux Mint 19.2 Tina
Release: 19.2
Codename: tina
deniz[member=424]deniz[/member]-PC:~$ glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fog_distance,
GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,
deniz[member=424]deniz[/member]-PC:~$ dpkg -l | grep -E "nvidia|bumblebee|nvidia-prime|fglrx"
ii nvidia-prime-applet 1.0.7 all An applet for NVIDIA Prime
deniz[member=424]deniz[/member]-PC:~$ ubuntu-drivers list
nvidia-340
-
O zaman Linux Mint 19.2 ile elle Nvidia-390 sürücüsünü kurmayı deneyebilirsiniz. Nvidia-390 sürücüsünde de Xorg sürümü ile ilgili sorun olacağını sanmıyorum. Bununla birlikte Nvidia-340 ve Nvidia-390 sürücüsü legacy olduğu için hızlı destek gelmiyor.
İsterseniz aşağıdaki komutla PPA deposunu ekleyin sisteminize, PPA deposundaki Nvidia-390 sürümü daha güncel (nvidia-390.129) görünüyor.
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt-get update
-
Soyle bir cikti aldim. 390 'ni bulamadi
deniz[member=424]deniz[/member]-PC:~$ sudo apt-get install nvidia-390
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package nvidia-390 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
libnvidia-gl-390 nvidia-kernel-source-390:i386 nvidia-headless-no-dkms-390:i386
libnvidia-gl-430:i386 libnvidia-gl-390:i386 nvidia-kernel-source-430 nvidia-kernel-source-390
nvidia-headless-no-dkms-430 nvidia-headless-no-dkms-390 libnvidia-gl-430 libnvidia-gl-440:i386
libnvidia-gl-435:i386 libnvidia-gl-415:i386 libnvidia-gl-410:i386 nvidia-kernel-source-440
nvidia-kernel-source-435 nvidia-kernel-source-415 nvidia-kernel-source-410
nvidia-headless-no-dkms-440 nvidia-headless-no-dkms-435 nvidia-headless-no-dkms-415
nvidia-headless-no-dkms-410 libnvidia-gl-440 libnvidia-gl-435 libnvidia-gl-415
libnvidia-gl-410
E: Package 'nvidia-390' has no installation candidate
-
340 sürücüsünün son sürümünde x 1.20 ile değişiklikler mevcut. Ancak 390'da var mı emin olamadım.
https://devtalk.nvidia.com/default/topic/1068849
https://devtalk.nvidia.com/default/topic/1066275
-
nvidia-drive-390 nvidia-settings yukleyeyim mi ?
-
[member=4032]dbedel[/member] , Linux Mint 19.2 kurduysanız ve Ubuntu'da bu sürücüyü kullanabildiyseniz, yüklemenizde bir sakınca olacağını sanmıyorum. PPA deposundaki sürümü deneyin ve secureboot özelliğinin kapalı oduğundan emin olun.
[member=3240]Leopard[/member] , değişim notlarına göre eklenmiş görünüyor. Bu durum Linux Mint 19.2 ile sorun olmayacaktır.
nvidia-graphics-drivers-390 (390.77-0ubuntu0.18.04.2) bionic; urgency=medium
* debian/rules.defs:
- Add support for xserver-xorg-core-hwe-18.04 (LP: #1815579).
-- Alberto Milone <alberto.milone@canonical.com> Thu, 14 Feb 2019 16:14:57 +0100
-
Yok açılmıyor ekran siyah ekrana bakıyorum sü an ^_^. Bu haldeyken bakabileceğimiz bir çıktı var mı? Bir de sanırım hala X11 yüklü. cd /etc/X ‘tab’ yapınca X11 e tamamlıyor
-
Secureboot kapalı mı?
-
Açıktı daha onceden. Kapatmak için şifre girdim kapattım reboot ardindan şifreyi silmistim. Ama bu mint kurulumundan önceydi
-
Sistemi kurtarma kipi => resume seçeneği ile masaüstüne ulaşabilirsin. Aşağıdaki omutla secureboot durumuna bakabilirsin.
mokutil --sb-state
Öncesinde, kurulu değilse mokutil paketini kurunuz.
TTY ekranında aşğaıdaki komutu çalıştırırsanız (sekme - tab tuşu ile dosya adına kolayca ulaşırsınız),
sudo cp /var/log/Xorg.0.log /var/log/Xorg.0.log.yedek
masaüstüne ulaştığınızda aşağıdaki komutla çıktısına bakabilir ve paylaşabilirsiniz.
xed /var/log/Xorg.0.log.yedek
Bir de daha fazla bilgi lütfen, mesela bu durumu Linux Mint 19.2 ile mi yaşadınız, Nvidia PPA deposunu eklediniz mi? Bunun gibi hususları ayrıca belirtiniz.
-
Yok resume ile de açamadım masa üstu ortamını. Alt+f2 ile islemleri gerçekleştirip çıktısını bir dosyaya yazdiracağım sonra da sürücüyü silip tekrardan rebbot ile dosyanin içeriğini size yollayacağım
-
Elle kurduğunuzda, nvidia-prime paketini de kurdunuz mu? Bir de aşağıdaki komutun çıktısı gerekli olabilir.
cat /var/log/gpu-manager.log
-
Bu arada
mokutil --sb-state
EFI variables are not supported on this systemHatası veriyor ama biostan girip baktım seçim karartılmış yani secim yapamiyorum ama disable yazıyor sanırım kapalı
-
EFI destekli sisteme klasik kipte kurulum yapmış olabilirsiniz. Bu durumda secureboot etkisiz olamalı. Diğer hususlar için dönüş yaparsınız.
-
xed /var/log/Xorg.0.log.yedek
cok uzun onu nasil atabilecegimi bulamadim tek basina 4bin karakteri geciyor.
Sistemi kurtarma kipi => resume seçeneği ile masaüstüne ulaşabilirsin. Aşağıdaki omutla secureboot durumuna bakabilirsin.
mokutil --sb-state
Öncesinde, kurulu değilse mokutil paketini kurunuz.
TTY ekranında aşğaıdaki komutu çalıştırırsanız (sekme - tab tuşu ile dosya adına kolayca ulaşırsınız),
sudo cp /var/log/Xorg.0.log /var/log/Xorg.0.log.yedek
masaüstüne ulaştığınızda aşağıdaki komutla çıktısına bakabilir ve paylaşabilirsiniz.
xed /var/log/Xorg.0.log.yedek
Bir de daha fazla bilgi lütfen, mesela bu durumu Linux Mint 19.2 ile mi yaşadınız, Nvidia PPA deposunu eklediniz mi? Bunun gibi hususları ayrıca belirtiniz.
Butun islemler Linux Mint 19.2 degerceklestirildi. En basta PPA deposunu ekledim ve nvidia-390 yuklemeyi denedim olmayinca nvidia-driver-390 yukeldim. Onda ekran acilmadi.
/var/log/gpu-manager.log
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /opt/amdgpu-pro/bin/amdgpu-pro-px
Looking for nvidia modules in /lib/modules/4.15.0-72-generic/updates/dkms
Looking for amdgpu modules in /lib/modules/4.15.0-72-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is amdgpu versioned? no
Is amdgpu pro stack? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is nvidia kernel module available? no
Is amdgpu kernel module available? no
Vendor/Device Id: 8086:166
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:1140
BusID "PCI:1@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card1", driven by "nouveau"
Number of connected outputs for /dev/dri/card1: 0
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 2
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
Intel IGP detected
Desktop system detected
or laptop with open drivers
Nothing to do
digerini nasil atacagimi bilmiyorum ^^
Mesajlar Birleştirildi.
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 29.978] X Protocol Version 11, Revision 0
[ 29.978] Build Operating System: Linux 4.4.0-148-generic x86_64 Ubuntu
[ 29.978] Current Operating System: Linux deniz-PC 4.15.0-72-generic #81-Ubuntu SMP Tue Nov 26 12:20:02 UTC 2019 x86_64
[ 29.978] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-72-generic root=UUID=d93787cb-a977-48b3-8cf3-dc4d98952b8e ro quiet splash vt.handoff=1
[ 29.978] Build Date: 03 June 2019 08:10:35AM
[ 29.978] xorg-server 2:1.19.6-1ubuntu4.3 (For technical support please see http://www.ubuntu.com/support)
[ 29.978] Current version of pixman: 0.34.0
[ 29.978] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.978] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.978] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 27 18:10:15 2019
[ 29.998] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.041] (==) No Layout section. Using the first Screen section.
[ 30.041] (==) No screen section available. Using defaults.
[ 30.041] (**) |-->Screen "Default Screen Section" (0)
[ 30.041] (**) | |-->Monitor "<default monitor>"
[ 30.041] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.041] (==) Automatically adding devices
[ 30.041] (==) Automatically enabling devices
[ 30.041] (==) Automatically adding GPU devices
[ 30.041] (==) Automatically binding GPU devices
[ 30.041] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 30.114] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.114] Entry deleted from font path.
[ 30.114] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 30.114] Entry deleted from font path.
[ 30.114] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 30.114] Entry deleted from font path.
[ 30.135] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 30.135] Entry deleted from font path.
[ 30.135] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 30.135] Entry deleted from font path.
[ 30.135] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 30.135] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 30.135] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.135] (II) Loader magic: 0x55bb82832020
[ 30.135] (II) Module ABI versions:
[ 30.135] X.Org ANSI C Emulation: 0.4
[ 30.135] X.Org Video Driver: 23.0
[ 30.135] X.Org XInput driver : 24.1
[ 30.135] X.Org Server Extension : 10.0
[ 30.136] (++) using VT number 7
[ 30.136] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 30.137] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 30.137] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 30.151] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 30.151] (**) OutputClass "Nvidia Prime" ModulePath extended to "/x86_64-linux-gnu/nvidia/xorg,/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 30.151] (**) OutputClass "Nvidia Prime" setting /dev/dri/card1 as PrimaryGPU
[ 30.153] (--) PCI: (0:0:2:0) 8086:0166:1025:064b rev 9, Mem @ 0xb3000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 30.153] (--) PCI:*(0:1:0:0) 10de:1140:1025:0691 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[ 30.153] (II) LoadModule: "glx"
[ 30.166] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/libglx.so
[ 30.683] (II) Module glx: vendor="NVIDIA Corporation"
[ 30.683] compiled for 4.0.2, module version = 1.0.0
[ 30.683] Module class: X.Org Server Extension
[ 30.692] (II) NVIDIA GLX Module 390.129 Tue Jul 23 00:23:45 PDT 2019
[ 30.704] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 30.704] loading driver: nvidia
[ 30.704] (II) Applying OutputClass "Nvidia Prime" to /dev/dri/card1
[ 30.704] loading driver: nvidia
[ 30.704] (==) Matched nvidia as autoconfigured driver 0
[ 30.704] (==) Matched nvidia as autoconfigured driver 1
[ 30.704] (==) Matched nouveau as autoconfigured driver 2
[ 30.704] (==) Matched nouveau as autoconfigured driver 3
[ 30.704] (==) Matched modesetting as autoconfigured driver 4
[ 30.704] (==) Matched fbdev as autoconfigured driver 5
[ 30.704] (==) Matched vesa as autoconfigured driver 6
[ 30.704] (==) Assigned the driver to the xf86ConfigLayout
[ 30.704] (II) LoadModule: "nvidia"
[ 30.704] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[ 30.852] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.852] compiled for 4.0.2, module version = 1.0.0
[ 30.852] Module class: X.Org Video Driver
[ 30.859] (II) LoadModule: "nouveau"
[ 30.859] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.886] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.886] compiled for 1.19.3, module version = 1.0.15
[ 30.886] Module class: X.Org Video Driver
[ 30.886] ABI class: X.Org Video Driver, version 23.0
[ 30.886] (II) LoadModule: "modesetting"
[ 30.886] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.886] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.886] compiled for 1.19.6, module version = 1.19.6
[ 30.886] Module class: X.Org Video Driver
[ 30.886] ABI class: X.Org Video Driver, version 23.0
[ 30.886] (II) LoadModule: "fbdev"
[ 30.886] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.886] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.886] compiled for 1.19.3, module version = 0.4.4
[ 30.886] Module class: X.Org Video Driver
[ 30.886] ABI class: X.Org Video Driver, version 23.0
[ 30.886] (II) LoadModule: "vesa"
[ 30.887] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.887] (II) Module vesa: vendor="X.Org Foundation"
[ 30.887] compiled for 1.19.3, module version = 2.3.4
[ 30.887] Module class: X.Org Video Driver
[ 30.887] ABI class: X.Org Video Driver, version 23.0
[ 30.887] (II) NVIDIA dlloader X Driver 390.129 Mon Jul 22 23:59:27 PDT 2019
[ 30.887] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.887] (II) NOUVEAU driver Date: Fri Apr 21 14:41:17 2017 -0400
[ 30.888] (II) NOUVEAU driver for NVIDIA chipset families :
[ 30.888] RIVA TNT (NV04)
[ 30.888] RIVA TNT2 (NV05)
[ 30.888] GeForce 256 (NV10)
[ 30.888] GeForce 2 (NV11, NV15)
[ 30.888] GeForce 4MX (NV17, NV18)
[ 30.888] GeForce 3 (NV20)
[ 30.888] GeForce 4Ti (NV25, NV28)
[ 30.888] GeForce FX (NV3x)
[ 30.888] GeForce 6 (NV4x)
[ 30.888] GeForce 7 (G7x)
[ 30.888] GeForce 8 (G8x)
[ 30.888] GeForce GTX 200 (NVA0)
[ 30.888] GeForce GTX 400 (NVC0)
[ 30.888] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.888] (II) FBDEV: driver for framebuffer: fbdev
[ 30.888] (II) VESA: driver for VESA chipsets: vesa
[ 30.902] (II) Loading sub module "fb"
[ 30.902] (II) LoadModule: "fb"
[ 30.902] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.902] (II) Module fb: vendor="X.Org Foundation"
[ 30.902] compiled for 1.19.6, module version = 1.0.0
[ 30.902] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.902] (II) Loading sub module "wfb"
[ 30.902] (II) LoadModule: "wfb"
[ 30.902] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.957] (II) Module wfb: vendor="X.Org Foundation"
[ 30.957] compiled for 1.19.6, module version = 1.0.0
[ 30.957] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.957] (II) Loading sub module "ramdac"
[ 30.957] (II) LoadModule: "ramdac"
[ 30.957] (II) Module "ramdac" already built-in
[ 30.959] (WW) Falling back to old probe method for modesetting
[ 30.964] (WW) Falling back to old probe method for fbdev
[ 30.964] (II) Loading sub module "fbdevhw"
[ 30.964] (II) LoadModule: "fbdevhw"
[ 30.965] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 30.965] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 30.965] compiled for 1.19.6, module version = 0.0.2
[ 30.965] ABI class: X.Org Video Driver, version 23.0
[ 30.965] (WW) Falling back to old probe method for vesa
[ 30.981] (II) modeset(G0): using drv /dev/dri/card0
[ 30.981] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.981] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 30.981] (==) NVIDIA(0): RGB weight 888
[ 30.981] (==) NVIDIA(0): Default visual is TrueColor
[ 30.981] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.984] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 30.984] (II) Applying OutputClass "Nvidia Prime" options to /dev/dri/card1
[ 30.984] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 30.984] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[ 30.984] (**) NVIDIA(0): Enabling 2D acceleration
[ 31.147] (II) NVIDIA(0): NVIDIA GPU GeForce 710M (GF117) at PCI:1:0:0 (GPU-0)
[ 31.147] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 31.147] (--) NVIDIA(0): VideoBIOS: 75.17.48.00.0a
[ 31.147] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 31.147] (II) NVIDIA(0): Validated MetaModes:
[ 31.147] (II) NVIDIA(0): "NULL"
[ 31.147] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 31.147] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 31.147] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 31.147] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 31.147] (==) modeset(G0): RGB weight 888
[ 31.147] (==) modeset(G0): Default visual is TrueColor
[ 31.147] (II) Loading sub module "glamoregl"
[ 31.147] (II) LoadModule: "glamoregl"
[ 31.147] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 31.231] (II) Module glamoregl: vendor="X.Org Foundation"
[ 31.231] compiled for 1.19.6, module version = 1.0.0
[ 31.231] ABI class: X.Org ANSI C Emulation, version 0.4
[ 31.231] (II) glamor: OpenGL accelerated X.org driver based.
[ 31.616] (II) glamor: EGL version 1.4:
[ 31.689] (II) modeset(G0): glamor initialized
[ 31.689] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[ 31.694] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 31.702] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 31.702] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 31.702] (II) modeset(G0): EDID for output LVDS-1-1
[ 31.702] (II) modeset(G0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 31.702] (II) modeset(G0): Year: 2011 Week: 0
[ 31.702] (II) modeset(G0): EDID Version: 1.4
[ 31.702] (II) modeset(G0): Digital Display Input
[ 31.702] (II) modeset(G0): 6 bits per channel
[ 31.702] (II) modeset(G0): Digital interface is undefined
[ 31.702] (II) modeset(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 31.702] (II) modeset(G0): Gamma: 2.20
[ 31.702] (II) modeset(G0): No DPMS capabilities specified
[ 31.702] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 31.702] (II) modeset(G0): First detailed timing is preferred mode
[ 31.702] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 31.702] (II) modeset(G0): redX: 0.580 redY: 0.335 greenX: 0.330 greenY: 0.565
[ 31.703] (II) modeset(G0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
[ 31.703] (II) modeset(G0): Manufacturer's mask: 0
[ 31.703] (II) modeset(G0): Supported detailed timing:
[ 31.703] (II) modeset(G0): clock: 73.3 MHz Image Size: 344 x 193 mm
[ 31.703] (II) modeset(G0): h_active: 1366 h_sync: 1382 h_sync_end 1398 h_blank_end 1550 h_border: 0
[ 31.703] (II) modeset(G0): v_active: 768 v_sync: 771 v_sync_end 785 v_blanking: 788 v_border: 0
[ 31.703] (II) modeset(G0): Unknown vendor-specific block f
[ 31.703] (II) modeset(G0): AUO
[ 31.703] (II) modeset(G0): B156XTN02.2
[ 31.703] (II) modeset(G0): EDID (in hex):
[ 31.703] (II) modeset(G0): 00ffffffffffff0006afec2200000000
[ 31.703] (II) modeset(G0): 001501049022137802bbf59455549027
[ 31.703] (II) modeset(G0): 23505400000001010101010101010101
[ 31.703] (II) modeset(G0): 010101010101a21c56b8500014301010
[ 31.703] (II) modeset(G0): 3e0058c1100000180000000f00000000
[ 31.703] (II) modeset(G0): 00000000000000000020000000fe0041
[ 31.703] (II) modeset(G0): 554f0a202020202020202020000000fe
[ 31.703] (II) modeset(G0): 004231353658544e30322e32200a0072
[ 31.703] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[ 31.703] (II) modeset(G0): Modeline "1366x768"x60.0 73.30 1366 1382 1398 1550 768 771 785 788 -hsync -vsync (47.3 kHz eP)
[ 31.703] (II) modeset(G0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 31.703] (II) modeset(G0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 31.703] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 31.703] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 31.703] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 31.704] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 31.704] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 31.704] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 31.704] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 31.704] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 31.704] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 31.704] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 31.704] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 31.704] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 31.704] (II) modeset(G0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 31.704] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 31.704] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 31.704] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 31.704] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 31.704] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
Mesajlar Birleştirildi.
[ 31.704] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 31.704] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 31.704] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 31.704] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 31.704] (II) modeset(G0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 31.704] (II) modeset(G0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 31.704] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 31.704] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 31.705] (II) modeset(G0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 31.705] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 31.705] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 31.705] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 31.705] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 31.705] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 31.705] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 31.705] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 31.705] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 31.705] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 31.705] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 31.705] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 31.705] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 31.705] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 31.705] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 31.705] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 31.705] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 31.705] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 31.705] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 31.710] (II) modeset(G0): EDID for output VGA-1-1
[ 31.719] (II) modeset(G0): EDID for output HDMI-1-1
[ 31.719] (II) modeset(G0): EDID for output DP-1-1
[ 31.719] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 31.719] (==) modeset(G0): DPI set to (96, 96)
[ 31.720] (II) Loading sub module "fb"
[ 31.720] (II) LoadModule: "fb"
[ 31.720] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 31.720] (II) Module fb: vendor="X.Org Foundation"
[ 31.720] compiled for 1.19.6, module version = 1.0.0
[ 31.720] ABI class: X.Org ANSI C Emulation, version 0.4
[ 31.720] (II) UnloadModule: "nouveau"
[ 31.720] (II) Unloading nouveau
[ 31.720] (II) UnloadModule: "fbdev"
[ 31.720] (II) Unloading fbdev
[ 31.720] (II) UnloadSubModule: "fbdevhw"
[ 31.720] (II) Unloading fbdevhw
[ 31.720] (II) UnloadModule: "vesa"
[ 31.720] (II) Unloading vesa
[ 31.720] (--) Depth 24 pixmap format is 32 bpp
[ 31.784] (==) modeset(G0): Backing store enabled
[ 31.784] (==) modeset(G0): Silken mouse enabled
[ 31.784] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 31.813] (==) modeset(G0): DPMS enabled
[ 31.813] (II) modeset(G0): [DRI2] Setup complete
[ 31.813] (II) modeset(G0): [DRI2] DRI driver: i965
[ 31.813] (II) modeset(G0): [DRI2] VDPAU driver: i965
[ 31.814] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 31.814] (II) NVIDIA: access.
[ 31.854] (II) NVIDIA(0): Setting mode "NULL"
[ 31.870] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 31.870] (==) NVIDIA(0): Backing store enabled
[ 31.870] (==) NVIDIA(0): Silken mouse enabled
[ 31.870] (==) NVIDIA(0): DPMS enabled
[ 31.901] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 31.902] (II) Loading sub module "dri2"
[ 31.902] (II) LoadModule: "dri2"
[ 31.902] (II) Module "dri2" already built-in
[ 31.902] (II) NVIDIA(0): [DRI2] Setup complete
[ 31.902] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 31.902] (--) RandR disabled
[ 31.917] (II) SELinux: Disabled on system
[ 31.917] (II) Initializing extension GLX
[ 31.917] (II) Indirect GLX disabled.
[ 32.208] (II) modeset(G0): Damage tracking initialized
[ 32.560] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.560] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 32.560] (II) LoadModule: "libinput"
[ 32.560] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 32.622] (II) Module libinput: vendor="X.Org Foundation"
[ 32.622] compiled for 1.19.6, module version = 0.27.1
[ 32.622] Module class: X.Org XInput Driver
[ 32.622] ABI class: X.Org XInput driver, version 24.1
[ 32.622] (II) Using input driver 'libinput' for 'Power Button'
[ 32.622] (**) Power Button: always reports core events
[ 32.622] (**) Option "Device" "/dev/input/event3"
[ 32.622] (**) Option "_source" "server/udev"
[ 32.623] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 32.623] (II) event3 - Power Button: device is a keyboard
Mesajlar Birleştirildi.
[ 32.623] (II) event3 - Power Button: device removed
[ 32.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 32.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.636] (**) Option "xkb_model" "pc105"
[ 32.636] (**) Option "xkb_layout" "gb"
[ 32.662] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 32.662] (II) event3 - Power Button: device is a keyboard
[ 32.663] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 32.663] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 32.663] (II) Using input driver 'libinput' for 'Video Bus'
[ 32.663] (**) Video Bus: always reports core events
[ 32.663] (**) Option "Device" "/dev/input/event6"
[ 32.663] (**) Option "_source" "server/udev"
[ 32.664] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 32.664] (II) event6 - Video Bus: device is a keyboard
[ 32.664] (II) event6 - Video Bus: device removed
[ 32.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[ 32.680] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 32.680] (**) Option "xkb_model" "pc105"
[ 32.680] (**) Option "xkb_layout" "gb"
[ 32.681] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 32.681] (II) event6 - Video Bus: device is a keyboard
[ 32.682] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 32.682] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 32.682] (II) Using input driver 'libinput' for 'Power Button'
[ 32.683] (**) Power Button: always reports core events
[ 32.683] (**) Option "Device" "/dev/input/event0"
[ 32.683] (**) Option "_source" "server/udev"
[ 32.683] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 32.684] (II) event0 - Power Button: device is a keyboard
[ 32.684] (II) event0 - Power Button: device removed
[ 32.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[ 32.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 32.712] (**) Option "xkb_model" "pc105"
[ 32.712] (**) Option "xkb_layout" "gb"
[ 32.713] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 32.713] (II) event0 - Power Button: device is a keyboard
[ 32.714] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 32.714] (II) No input driver specified, ignoring this device.
[ 32.714] (II) This device may have been added with another device file.
[ 32.715] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 32.715] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 32.715] (II) Using input driver 'libinput' for 'Sleep Button'
[ 32.715] (**) Sleep Button: always reports core events
[ 32.715] (**) Option "Device" "/dev/input/event2"
[ 32.715] (**) Option "_source" "server/udev"
[ 32.716] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 32.716] (II) event2 - Sleep Button: device is a keyboard
[ 32.716] (II) event2 - Sleep Button: device removed
[ 32.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2/event2"
[ 32.740] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 32.740] (**) Option "xkb_model" "pc105"
[ 32.740] (**) Option "xkb_layout" "gb"
[ 32.741] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 32.741] (II) event2 - Sleep Button: device is a keyboard
[ 32.742] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 32.742] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 32.743] (II) Using input driver 'libinput' for 'Video Bus'
[ 32.743] (**) Video Bus: always reports core events
[ 32.743] (**) Option "Device" "/dev/input/event5"
[ 32.743] (**) Option "_source" "server/udev"
[ 32.744] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 32.744] (II) event5 - Video Bus: device is a keyboard
[ 32.744] (II) event5 - Video Bus: device removed
[ 32.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input7/event5"
[ 32.776] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 32.776] (**) Option "xkb_model" "pc105"
[ 32.776] (**) Option "xkb_layout" "gb"
[ 32.777] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 32.777] (II) event5 - Video Bus: device is a keyboard
[ 32.778] (II) config/udev: Adding input device SINOWEALTH Game Mouse (/dev/input/event7)
[ 32.778] (**) SINOWEALTH Game Mouse: Applying InputClass "libinput pointer catchall"
[ 32.778] (II) Using input driver 'libinput' for 'SINOWEALTH Game Mouse'
[ 32.778] (**) SINOWEALTH Game Mouse: always reports core events
[ 32.778] (**) Option "Device" "/dev/input/event7"
[ 32.778] (**) Option "_source" "server/udev"
[ 32.836] (II) event7 - SINOWEALTH Game Mouse: is tagged by udev as: Mouse
[ 32.836] (II) event7 - SINOWEALTH Game Mouse: device is a pointer
[ 32.836] (II) event7 - SINOWEALTH Game Mouse: device removed
[ 32.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:258A:1007.0001/input/input9/event7"
[ 32.868] (II) XINPUT: Adding extended input device "SINOWEALTH Game Mouse" (type: MOUSE, id 11)
[ 32.868] (**) Option "AccelerationScheme" "none"
[ 32.868] (**) SINOWEALTH Game Mouse: (accel) selected scheme none/0
[ 32.868] (**) SINOWEALTH Game Mouse: (accel) acceleration factor: 2.000
[ 32.868] (**) SINOWEALTH Game Mouse: (accel) acceleration threshold: 4
[ 32.928] (II) event7 - SINOWEALTH Game Mouse: is tagged by udev as: Mouse
[ 32.928] (II) event7 - SINOWEALTH Game Mouse: device is a pointer
[ 32.929] (II) config/udev: Adding input device SINOWEALTH Game Mouse (/dev/input/mouse0)
[ 32.929] (II) No input driver specified, ignoring this device.
[ 32.929] (II) This device may have been added with another device file.
[ 32.930] (II) config/udev: Adding input device SINOWEALTH Game Mouse (/dev/input/event8)
[ 32.930] (**) SINOWEALTH Game Mouse: Applying InputClass "libinput keyboard catchall"
[ 32.930] (II) Using input driver 'libinput' for 'SINOWEALTH Game Mouse'
[ 32.930] (**) SINOWEALTH Game Mouse: always reports core events
[ 32.930] (**) Option "Device" "/dev/input/event8"
[ 32.930] (**) Option "_source" "server/udev"
[ 32.930] (II) event8 - SINOWEALTH Game Mouse: is tagged by udev as: Keyboard
[ 32.931] (II) event8 - SINOWEALTH Game Mouse: device is a keyboard
[ 32.931] (II) event8 - SINOWEALTH Game Mouse: device removed
[ 32.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:258A:1007.0002/input/input10/event8"
[ 32.944] (II) XINPUT: Adding extended input device "SINOWEALTH Game Mouse" (type: KEYBOARD, id 12)
[ 32.944] (**) Option "xkb_model" "pc105"
[ 32.944] (**) Option "xkb_layout" "gb"
[ 32.945] (II) event8 - SINOWEALTH Game Mouse: is tagged by udev as: Keyboard
[ 32.945] (II) event8 - SINOWEALTH Game Mouse: device is a keyboard
[ 32.945] (II) config/udev: Adding input device DATACOMP SteelS쀁Љ̒DATA (/dev/input/event9)
[ 32.946] (**) DATACOMP SteelS쀁Љ̒DATA: Applying InputClass "libinput keyboard catchall"
[ 32.946] (II) Using input driver 'libinput' for 'DATACOMP SteelS쀁Љ̒DATA'
[ 32.946] (**) DATACOMP SteelS쀁Љ̒DATA: always reports core events
[ 32.946] (**) Option "Device" "/dev/input/event9"
[ 32.946] (**) Option "_source" "server/udev"
[ 32.946] (II) event9 - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[ 32.946] (II) event9 - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[ 32.946] (II) event9 - DATACOMP SteelS쀁Љ̒DATA: device removed
[ 32.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04B4:0101.0003/input/input11/event9"
[ 32.960] (II) XINPUT: Adding extended input device "DATACOMP SteelS쀁Љ̒DATA" (type: KEYBOARD, id 13)
[ 32.960] (**) Option "xkb_model" "pc105"
[ 32.960] (**) Option "xkb_layout" "gb"
[ 32.961] (II) event9 - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[ 32.961] (II) event9 - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[ 32.961] (II) config/udev: Adding input device DATACOMP SteelS쀁Љ̒DATA (/dev/input/event11)
[ 32.961] (**) DATACOMP SteelS쀁Љ̒DATA: Applying InputClass "libinput keyboard catchall"
[ 32.961] (II) Using input driver 'libinput' for 'DATACOMP SteelS쀁Љ̒DATA'
[ 32.962] (**) DATACOMP SteelS쀁Љ̒DATA: always reports core events
[ 32.962] (**) Option "Device" "/dev/input/event11"
[ 32.962] (**) Option "_source" "server/udev"
[ 32.962] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[ 32.962] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[ 32.962] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: device removed
[ 32.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04B4:0101.0004/input/input12/event11"
[ 32.976] (II) XINPUT: Adding extended input device "DATACOMP SteelS쀁Љ̒DATA" (type: KEYBOARD, id 14)
[ 32.976] (**) Option "xkb_model" "pc105"
[ 32.976] (**) Option "xkb_layout" "gb"
[ 32.977] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[ 32.977] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[ 32.977] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event16)
[ 32.977] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 32.977] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[ 32.977] (**) HD WebCam: HD WebCam: always reports core events
[ 32.977] (**) Option "Device" "/dev/input/event16"
[ 32.978] (**) Option "_source" "server/udev"
[ 32.978] (II) event16 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 32.978] (II) event16 - HD WebCam: HD WebCam: device is a keyboard
[ 32.978] (II) event16 - HD WebCam: HD WebCam: device removed
[ 33.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17/event16"
[ 33.024] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 15)
[ 33.024] (**) Option "xkb_model" "pc105"
[ 33.024] (**) Option "xkb_layout" "gb"
[ 33.025] (II) event16 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 33.025] (II) event16 - HD WebCam: HD WebCam: device is a keyboard
[ 33.025] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
Mesajlar Birleştirildi.
Bu kod biraz daha boyle devam ediyor.
-
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
Intel IGP detected
Desktop system detected
or laptop with open drivers
Daha önce de sormuştum ama gözden kaçtı sanırım, nvidia-prime paketi kurulu mu? Değilse nvidia sürücüsü ile bunu da kurunuz.
-
Cok pardon telefonla kontrol ettigim icin gorememisim. Kurmamistim kurup bir daha deniyecegim
Mesajlar Birleştirildi.
nvidia-prime yükleyince açıldı. Fakat pek bir şey değişmedi ekrandaki kırılmalar hala devam etmekte.
deniz[member=424]deniz[/member]-PC:~$ nvidia-smi
Fri Dec 27 19:19:00 2019
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.129 Driver Version: 390.129 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce 710M Off | 00000000:01:00.0 N/A | N/A |
| N/A 46C P8 N/A / N/A | 51MiB / 1985MiB | N/A Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 Not Supported |
+-----------------------------------------------------------------------------+
deniz[member=424]deniz[/member]-PC:~$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce 710M/PCIe/SSE2
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_KHR_robustness, GL_KTX_buffer_region, GL_NVX_conditional_render,
GL_NV_conditional_render, GL_NV_copy_depth_to_color, GL_NV_copy_image,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_ARB_compute_variable_group_size, GL_ARB_conditional_render_inverted,
GL_KHR_robustness, GL_KTX_buffer_region, GL_NVX_conditional_render,
GL_NV_conditional_render, GL_NV_copy_depth_to_color, GL_NV_copy_image,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_EXT_multisampled_render_to_texture,
GL_EXT_multisampled_render_to_texture2, GL_EXT_occlusion_query_boolean,
GL_EXT_render_snorm, GL_EXT_robustness, GL_EXT_sRGB,
GL_NV_blend_equation_advanced, GL_NV_conditional_render,
GL_NV_packed_float_linear, GL_NV_path_rendering,
GL_OES_fbo_render_mipmap, GL_OES_geometry_point_size,
deniz[member=424]deniz[/member]-PC:~$ dpkg -l | grep -E "nvidia|bumblebee|nvidia-prime|fglrx"
ii libnvidia-cfg1-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA binary OpenGL/GLX configuration library
ii libnvidia-common-390 390.129-0ubuntu0~gpu18.04.1 all Shared files used by the NVIDIA libraries
ii libnvidia-compute-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA libcompute package
ii libnvidia-decode-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA Video Decoding runtime libraries
ii libnvidia-encode-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVENC Video Encoding runtime library
ii libnvidia-fbc1-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA OpenGL-based Framebuffer Capture runtime library
ii libnvidia-gl-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii libnvidia-ifr1-390:amd64 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA OpenGL-based Inband Frame Readback runtime library
ii nvidia-compute-utils-390 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA compute utilities
ii nvidia-dkms-390 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA DKMS package
ii nvidia-driver-390 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA driver metapackage
ii nvidia-kernel-common-390 390.129-0ubuntu0~gpu18.04.1 amd64 Shared files used with the kernel module
ii nvidia-kernel-source-390 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA kernel source package
ii nvidia-prime 0.8.8.2 all Tools to enable NVIDIA's Prime
ii nvidia-prime-applet 1.0.7 all An applet for NVIDIA Prime
ii nvidia-settings 418.56-0ubuntu0~gpu18.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii nvidia-utils-390 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA driver support binaries
ii xserver-xorg-video-nvidia-390 390.129-0ubuntu0~gpu18.04.1 amd64 NVIDIA binary Xorg driver
Nvidia settingten PRIME Profiles sekmesinden, Select the GPU you would lıke to use ---> NVIDIA(performance mode ) seçili
-
Nvidia Prime yırtılma sorunu ile ilgili, forumdaki Nvidia bölümü altında sabitlenmiş konumuz mevcut. Sürücü kurulum sorunu çözüldüyse bu başlığı etiketleyebilirsiniz.
-
Sabahtan beri uğraşıyorsunuz çok ama çok teşekkür ederim
-
Rica ederiz. Sorunun kaynağı belli olduğuna göre, Linux Mint 19.2 kurduysanız, Linux Mint 19.3'e yükseltebilirsiniz.
[info][Nasıl] Linux Mint 19.x Serisinde Sürüm Yükseltme (https://forum.linuxmint.net.tr/index.php?topic=9787.0)[/info]
İsterseniz aşağıdaki komutla Xorg sürümünü de yükseltmek mümkün. Bunu tercihen düşünebilirsiniz, mecburi değildir.
sudo apt-get install --install-recommends xserver-xorg-hwe-18.04
[okay]Sorun çözüldüğü için konu kilitlenmiştir.[/okay]