Linux Mint Türkiye
Linux Mint Destek => Açılış, Kapanış ve Oturum Açma => Konuyu başlatan: Crystal - 11 Ekim 2020, 20:33:04
-
Linux Mint 20 "Ulyana" - MATE (64-bit) kullanıyorum laptop power tuşuna bastıktan sonra şifre ekranına kadar çok bekliyorum bu süreyi kısaltmanın yolu var mı yardım edermisiniz.
-
Bağlantıdaki (https://forum.linuxmint.net.tr/index.php?topic=10580.msg64738#msg64738) komutların çıktılarını paylaşınız.
-
x@x:~$ inxi -Fxxz
System:
Kernel: 5.4.0-48-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: MATE 1.24.0 wm: marco dm: LightDM Distro: Linux Mint 20 Ulyana
base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: Hewlett-Packard product: HP Pavilion dm1 Notebook PC
v: 0391100000201B00100320000 serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: Hewlett-Packard model: 3663 v: 49.0E serial: <filter>
BIOS: Hewlett-Packard v: F.15 date: 11/17/2010
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M185
serial: <filter> charge: 55% (should be ignored) status: Discharging
CPU:
Topology: Dual Core model: Intel U4100 bits: 64 type: MCP arch: Penryn
rev: A L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 5200
Speed: 1200 MHz min/max: 1200/1300 MHz Core speeds (MHz): 1: 1200 2: 1200
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics
vendor: Hewlett-Packard driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:2a42
Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa
compositor: marco resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express (CTG)
v: 2.1 Mesa 20.0.8 direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
Sound Server: ALSA v: k5.4.0-48-generic
Network:
Device-1: Broadcom and subsidiaries BCM4312 802.11b/g LP-PHY
vendor: Hewlett-Packard driver: wl v: kernel port: 4000 bus ID: 02:00.0
chip ID: 14e4:4315
IF: wlo1 state: up mac: <filter>
Device-2: Realtek RTL810xE PCI Express Fast Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 03:00.0
chip ID: 10ec:8136
IF: enp3s0 state: down mac: <filter>
Drives:
Local Storage: total: 232.89 GiB used: 12.09 GiB (5.2%)
ID-1: /dev/sda vendor: Seagate model: ST9250315AS size: 232.89 GiB
speed: 3.0 Gb/s serial: <filter>
Partition:
ID-1: / size: 227.74 GiB used: 12.09 GiB (5.3%) fs: ext4 dev: /dev/sda5
Sensors:
System Temperatures: cpu: 47.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 188 Uptime: 20m Memory: 4.73 GiB used: 1.39 GiB (29.5%)
Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Shell: bash
v: 5.0.17 running in: mate-terminal inxi: 3.0.38
x@x:~$ dmesg | nc termbin.com 9999
https://termbin.com/dfdn1
x@x:~$ systemd-analyze time
Startup finished in 7.141s (kernel) + 25.374s (userspace) = 32.515s
graphical.target reached after 25.327s in userspace
x@x:~$ systemd-analyze --no-pager blame
10.898s systemd-rfkill.service
9.949s dev-sda5.device
9.431s accounts-daemon.service
9.159s networkd-dispatcher.service
9.146s udisks2.service
6.703s polkit.service
6.597s NetworkManager.service
6.288s avahi-daemon.service
4.425s grub-common.service
4.374s networking.service
4.254s thermald.service
4.235s wpa_supplicant.service
4.220s systemd-logind.service
3.649s systemd-resolved.service
3.561s ubuntu-system-adjustments.service
3.373s grub-initrd-fallback.service
3.268s alsa-restore.service
3.238s systemd-journal-flush.service
3.078s hddtemp.service
2.948s gpu-manager.service
2.236s lightdm.service
2.220s plymouth-quit-wait.service
2.120s e2scrub_reap.service
2.016s systemd-udevd.service
2.009s apparmor.service
1.975s lm-sensors.service
1.916s ModemManager.service
1.869s rsyslog.service
1.845s pppd-dns.service
1.622s systemd-tmpfiles-setup.service
1.018s upower.service
1.002s ntp.service
994ms systemd-user-sessions.service
941ms keyboard-setup.service
889ms systemd-modules-load.service
792ms systemd-sysusers.service
714ms dns-clean.service
686ms swapfile.swap
652ms systemd-random-seed.service
635ms systemd-sysctl.service
509ms systemd-fsck[member=2665]Dev-disk-by\x2duuid-0167\x2dEFEB.service
448ms systemd-udev-trigger.service
416ms console-setup.service
414ms systemd-journald.service
405ms ifupdown-pre.service
380ms setvtrgb.service
358ms user@1000.service
300ms bluetooth.service
285ms systemd-remount-fs.service
275ms systemd-backlight@backlight:acpi_video0.service
223ms systemd-tmpfiles-setup-dev.service
198ms lvm2-monitor.service
167ms dev-hugepages.mount
166ms dev-mqueue.mount
165ms boot-efi.mount
164ms sys-kernel-debug.mount
162ms sys-kernel-tracing.mount
157ms blk-availability.service
154ms ufw.service
146ms kmod-static-nodes.service
123ms kerneloops.service
94ms plymouth-read-write.service
82ms systemd-tmpfiles-clean.service
69ms systemd-backlight@backlight:intel_backlight.service
64ms rtkit-daemon.service
62ms systemd-update-utmp.service
56ms user-runtime-dir@1000.service
38ms sys-fs-fuse-connections.mount
38ms systemd-update-utmp-runlevel.service
25ms sys-kernel-config.mount
24ms plymouth-start.service
21ms finalrd.service
13ms openvpn.service
x@x:~$ systemd-analyze --no-pager critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @25.327s
└─udisks2.service @16.180s +9.146s
└─basic.target @14.066s
└─sockets.target @14.066s
└─uuidd.socket @14.066s
└─sysinit.target @13.997s
└─apparmor.service @11.986s +2.009s
└─local-fs.target @11.983s
└─boot-efi.mount @11.817s +165ms
└─systemd-fsck[member=2665]Dev-disk-by\x2duuid-0167\x2dEFEB.service @11.254s +509ms
└─dev-disk-by\x2duuid-0167\x2dEFEB.device @11.252s
x@x:~$ journalctl --no-pager -b -p3
-- Logs begin at Wed 2020-10-07 20:18:02 +03, end at Mon 2020-10-12 00:22:24 +03. --
Eki 12 00:02:22 x bluetoothd[663]: Failed to set mode: Blocked through rfkill (0x12)
Eki 12 00:02:24 x ntpd[700]: error resolving pool 0.ubuntu.pool.ntp.org: Name or service not known (-2)
Eki 12 00:02:25 x ntpd[700]: error resolving pool 1.ubuntu.pool.ntp.org: Name or service not known (-2)
Eki 12 00:02:26 x ntpd[700]: error resolving pool 2.ubuntu.pool.ntp.org: Name or service not known (-2)
Eki 12 00:02:27 x ntpd[700]: error resolving pool 3.ubuntu.pool.ntp.org: Name or service not known (-2)
Eki 12 00:02:28 x ntpd[700]: error resolving pool ntp.ubuntu.com: Name or service not known (-2)
Eki 12 00:02:30 x wpa_supplicant[583]: bgscan simple: Failed to enable signal strength monitoring
Eki 12 00:02:33 x lightdm[834]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Eki 12 00:02:33 x lightdm[834]: PAM adding faulty module: pam_kwallet.so
Eki 12 00:02:33 x lightdm[834]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
Eki 12 00:02:33 x lightdm[834]: PAM adding faulty module: pam_kwallet5.so
Eki 12 00:02:37 x pulseaudio[847]: No UCM verb is valid for hw:0
Eki 12 00:02:42 x lightdm[932]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Eki 12 00:02:42 x lightdm[932]: PAM adding faulty module: pam_kwallet.so
Eki 12 00:02:42 x lightdm[932]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
Eki 12 00:02:42 x lightdm[932]: PAM adding faulty module: pam_kwallet5.so
Eki 12 00:02:45 x lightdm[932]: gkr-pam: unable to locate daemon control file
Eki 12 00:02:46 x pulseaudio[955]: No UCM verb is valid for hw:0
Eki 12 00:02:58 x bluetoothd[663]: Failed to set mode: Blocked through rfkill (0x12)
Eki 12 00:03:40 x ntpd[700]: error resolving pool 1.ubuntu.pool.ntp.org: Name or service not known (-2)
Eki 12 00:03:50 x ntpd[700]: error resolving pool 0.ubuntu.pool.ntp.org: Name or service not known (-2)
Eki 12 00:22:24 x sudo[4675]: x : a password is required ; TTY=pts/0 ; PWD=/home/x ; USER=root ; COMMAND=/usr/sbin/hddtemp -nq -u C /dev/sda
x@x:~$ systemctl --no-pager --state=failed
UNiT LOAD ACTiVE SUB DESCRiPTiON
0 loaded units listed.
x@x:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=1af0c61f-346b-469b-b0aa-a73116837aa3 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0167-EFEB /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
x@x:~$ sudo blkid
x için parola:
/dev/sda1: UUID="0167-EFEB" TYPE="vfat" PARTUUID="c491b9a8-01"
/dev/sda5: UUID="1af0c61f-346b-469b-b0aa-a73116837aa3" TYPE="ext4" PARTUUID="c491b9a8-05"
x@x:~$ cat /etc/initramfs-tools/conf.d/resume
RESUME=none
x@x:~$
Düzenleme: Kod etiketi => https://forum.linuxmint.net.tr/index.php?topic=2629.0
-
Lütfen çıktıları paylaşırken kod etiketi kullanmaya dikkat edelim.
Eğer Linux Mint'in kurulu olduğu disk ya da disk bölümü HDD ise, şu an için açılış hızı normal sayılır.
-
Evet HDD. Daha hızlandırmanın yolu yoksa, teşekkür ederim.
Düzenleme: Yazım kuralları => https://forum.linuxmint.net.tr/index.php?topic=140.0#post_imla
-
Ureadahead paketi biraz daha hızlanma sağlayabilir. PPA depomuzdan kurabilirsiniz. https://forum.linuxmint.net.tr/index.php?topic=10711.0
Not: Lütfen forum içi yazışmalarda, yazı kurallarına özen gösterelim.
-
Çok teşekkür ederim