Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: eraycetin - 09 Aralık 2014, 17:10:21
-
Dün yine bu siteden başarıyla BumbleBee Project'i kurdum. Nvidia 310M ekran driver'ını başarıyla tanıttım. Fps kontrolü yaptım ve o da normal gözüküyordu. Fakat denemek amaçlı BumbleBee ile chrome'u çalıştırdım ve kraloyundan basit bi oyun açtım ve müthiş bi fps düşüklüğüyle karşılaştım.
Bunun sebebi ne olabilir?
-
Tarayıcıyı kapatıp aşağıdaki komutla uçbirimden başlatmayı dener misiniz?
optirun /usr/bin/google-chrome-stable %U
-
Chrome'un BumbleBee ile başlatıldığına dair bildirim geldi, tarayıcı açıldı fakat uçbirim'e baktığım zaman aşağıdaki hataları gördüm.
ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
[2667:2732:1209/200158:ERROR:get_updates_processor.cc(240)] PostClientToServerMessage() failed during GetUpdates
ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
-
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
Aşağıdaki komutlar ile Bumblebee kararlı PPA deposunu ekleyip virtualgl ile ilgili paketleri yüklemeyi deneyiniz.
sudo add-apt-repository ppa:bumblebee/stable
sudo apt-get update
sudo apt-get install virtualgl virtualgl-libs virtualgl-libs:i386
Chrome tarayıcıyı Bumblebee ile açınca performansda bir değişiklik oldu mu?
-
ERROR: ld.so: object 'librrfaker.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
[2907:2907:1209/210452:ERROR:gpu_process_transport_factory.cc(437)] Failed to establish GPU channel.
Malesef yine aynı.
Yukarıdaki hataya ek olarak gözüme yabancı gelen şu hata da vardı aralarında;
[WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED
Bahsettiğiniz işlemlerden sonra şu güncellemeler geldi fakat kurmadım. Kurup tekrar deneyip bilgi paylaşacağım.
(http://i.hizliresim.com/VggX9Z.png)
Edit: Ayrıca sorun sadece chrome'da değil, her ihtimale karşın Opera ve Firefox'ta da denedim. Sonuç yine başarısız...
Güncellemeleri yaptım fakat aynı hatalarla aynı sorun :/
Düzenleme : Mesajlar birleştirildi.
Lütfen peşpeşe mesaj göndermek yerine önceki mesajını düzenleyiniz.
-
Hatalar haricinde FPS değerlerinde bir değişiklik oluyor mu?
Yazlım Kaynakları uygulamasını açıp PPA bölümünden Xorg Edgers deposunu kaldırınız ve Güncelleme Yöneticisini açıp Yenile düğmesine tıklayınız.
Nvidia-331 haricindekiler normal güncellemeler.
-
Sorun devam ediyor.
FPS'yi test ettiğim oyun linkini veriyorum;
http://www.kraloyun.com/Oyun/Otobus-Parket-3D
Normalde fps'yle ilgili bi sorunum var mı onu henüz başka bi yöntemle denemiş değilim. Fakat windowsda yağ gibi oynayabildiğim oyun (intel ekran kartım dahil) linux'te sorun yaşatıyor. Anlayamadım.
-
Aşağıdaki komutların çıktılarına bakalım.
optirun -vvv glxgears
cat /etc/bumblebee/bumblebee.conf
cat /etc/bumblebee/xorg.conf.nvidia
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
-
optirun -vvv glxgears
[ 1872.643479] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1872.644115] [INFO]Configured driver: nvidia
[ 1872.644374] [DEBUG]optirun version 3.2.1 starting...
[ 1872.644423] [DEBUG]Active configuration:
[ 1872.644456] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1872.644482] [DEBUG] X display: :8
[ 1872.644507] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-331:/usr/lib32/nvidia-331
[ 1872.644533] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1872.644555] [DEBUG] Accel/display bridge: auto
[ 1872.644576] [DEBUG] VGL Compression: proxy
[ 1872.644597] [DEBUG] VGLrun extra options:
[ 1872.644619] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1872.644743] [DEBUG]Using auto-detected bridge virtualgl
[ 1876.509919] [INFO]Response: Yes. X is active.
[ 1876.509936] [INFO]Running application using virtualgl.
[ 1876.510076] [DEBUG]Process vglrun started, PID 3309.
5541 frames in 5.0 seconds = 1108.022 FPS
5573 frames in 5.0 seconds = 1114.436 FPS
5374 frames in 5.0 seconds = 1074.660 FPS
5352 frames in 5.0 seconds = 1070.309 FPS
5211 frames in 5.0 seconds = 1042.182 FPS
6000 frames in 5.0 seconds = 1199.841 FPS
6366 frames in 5.0 seconds = 1273.088 FPS
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-319
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-319:/usr/lib32/nvidia-319
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-319/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
[quote]cat /etc/bumblebee/bumblebee.conf[/quote]
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:02:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
ii bumblebee 3.2.1-90~trustyppa1 amd64 NVIDIA Optimus support
ii nvidia-319 331.113-0ubuntu1~xedgers14.04.1 amd64 Transitional package for nvidia-319
ii nvidia-331 331.113-0ubuntu1~xedgers14.04.1 amd64 NVIDIA binary driver - version 331.113
ii primus 20131127-1~trustyppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20131127-1~trustyppa1 amd64 Shared libraries for primus
-
Firefox'la deneyince durum ne oluyor?
optirun firefox
-
Daha önce belirttiğim gibi fark olmuyor opera dahil bütün tarayıcılarda fps düşüklüğü söz konusu
edit: Cinnamon indiriyorum şuan bir de cinnamon ile deneyeceğim aynı işlemleri
-
Sorun çözüldü.
Öncelikle Mate'i kaldırıp Cinnamon yükledim daha sonra bahsettiğiniz işlemleri tekrar yaptım. Bu defa Nvidia Sürücüsü yüklü, Nvidia Server Setting'de sadece 2 sekme gözüküyordu ve bunlar benim bi işime yaramıyordu. Daha sonra sürücü yöneticisi'e baktığımda "Nvidia-340" sürücünün geldiğini gördüm. Bunu güncelleyip sistemi resetledim ve WALA ! işlem başarıyla tamamlanmıştır.
Yalnız eklemek istiyorum bu işlemlerden sonra ağ sorunu yaşadım yine onu bu platformdan arama yaparak çözdüm eğer olur da karşılaşan olursa seve seve yaşadığım sorunlarla ilgili yardımcı olmak isterim.
Butterfly emekleriniz için sonsuz teşekkürler.
(http://i.hizliresim.com/yAmBr7.png)
-
optirun --bridge primus /usr/bin/google-chrome-stable %U
Bu komutla çalıştırmayı dener misin?