Linux Mint Türkiye
Linux Mint Destek => Masaüstü Ortamları => MATE Masaüstü => Konuyu başlatan: torrasar - 20 Şubat 2015, 18:53:36
-
Mint 17.1 Mate ve Manjaro Linux kullanıyorum.
Bugün XFCE ve Cinnamon desktop kurdum. apt-get install mint-meta-xfce apt-get install mint-meta-cinnamon
Giriş penceresi ayarlarından Cİnnamon,Mate,XFCE ne seçersem seçeyim hep MATE desktop açılıyor. Oturumu kapatıp yeni oturum açarken de ne seçersem seçeyim yine MATE açılıyor.
2 gün önce XFCE4 yüklemiştim, seçebiliyordum ve sıkıntı yoktu. Sonrasında Mint XFCE kurmak için sudo aptitude -P purge ~nxfce4 ile kaldırdım. Acaba kaldırırken yaptığım bir hatadan mı kaynaklanıyor olabilir?
-
Deneme için Mint 17.1 XFCE yi baştan kurdum.
Sonra MATE desktop ekledim.
apt-get install mint-meta-mate
XFCE de iken çıkış yapıp MATE ile giriş yapabiliyorum. Ama MATE açıldıktan sonra log off sonrası XFCE ye dönemiyorum. Bilgisayarı yeniden başlatmam gerekiyor.(MATE i açarken default ilan edersem bir daha XFCE ye geri dönemeyeceğim belli ki)
-
MDM görüntü yöneticisi üstünden istediğiniz masaüstünü seçemiyor musunuz?
(http://i.imgur.com/GNdH7r7.png)
-
Seçiyorum. Seçince TR bayrağı yanında Cinnamon seçersem Ci, XFCE eçersem Xf vb... de beliriyor. Ama şifreyi girip tamam tuşuna basınca ekran yanıp sönüyor ve MATE açılıyor.
MATE'i varsayılan masaüstü olarak ayarladıktan sonra MATE dışındaki masaüstü ortamlarını açamıyorum.
Düzenleme: İmla
Lütfen Türkçe sözcükler kullanmaya özen gösterelim. desktop=masaüstü, default=varsayılan karakartala
-
Aşağıdaki komutların çıktılarına bir bakalım.
dpkg -l | egrep 'mdm|session'
cat /etc/mdm/mdm.conf
-
dpkg -l | egrep 'mdm|session'
ii cinnamon-session 2.4.3+rebecca i386 Cinnamon Session Manager - Minimal runtime
ii cinnamon-session-common 2.4.3+rebecca all Cinnamon Session Manager - common files
ii cinnamon-settings-daemon 2.4.3+rebecca i386 daemon handling the Cinnamon session settings
ii command-not-found 0.3ubuntu12 all Suggest installation of packages in interactive bash sessions
ii consolekit 0.4.5-3.1ubuntu2 i386 framework for defining and tracking users, sessions and seats
ii gnome-settings-daemon 3.8.6.1-0ubuntu11.2 i386 daemon handling the GNOME session settings
ii lxsession 0.4.9.2+git20140410-0ubuntu1.2 i386 default session manager for LXDE
ii lxsession-data 0.4.9.2+git20140410-0ubuntu1.2 all Common files for lxsession
ii lxsession-edit 0.4.9.2+git20140410-0ubuntu1.2 i386 configure what application start up automaticlly in LXDE
ii lxsession-logout 0.4.9.2+git20140410-0ubuntu1.2 i386 utility to logout from a LXDE or an Openbox session
ii mate-session-manager 1.8.1-0 i386 MATE Session Manager
ii mate-settings-daemon 1.8.2-0+rebecca all daemon handling the MATE session settings (metapackage)
ii mate-settings-daemon-common 1.8.2-0+rebecca all daemon handling the MATE session settings (common files)
ii mate-settings-daemon-pulse 1.8.2-0+rebecca i386 daemon handling the MATE session settings (PulseAudio version)
ii mdm 1.8.3+rebecca i386 MDM Display Manager
ii mint-mdm-themes 2014.10.29 all Linux Mint MDM Themes
ii mint-mdm-themes-gdm 1.8.1 all Linux Mint MDM Themes
ii mint-mdm-themes-html 1.8.3 all Linux Mint MDM Themes
rc razorqt-session 0.5.2-4 i386 Session manager component for Razor-qt desktop environment
ii session-migration 0.2.1 i386 Tool to migrate in user session settings
ii sessioninstaller 0.20+bzr141-0ubuntu4 all APT based installer using PackageKit's session DBus API
ii x11-session-utils 7.7+1 i386 X session utilities
ii xfce4-session 4.10.1-3ubuntu5 i386 Xfce4 Session Manager
cat /etc/mdm/mdm.conf
# MDM Configuration file.
#
# This file is the appropriate place for specifying your customizations to the
# MDM configuration. If you run mdmsetup, it will automatically edit this
# file for you and will cause the daemon and any running MDM GUI programs to
# automatically update with the new configuration. Not all configuration
# options are supported by mdmsetup, so to modify some values it may be
# necessary to modify this file directly by hand.
#
# This file overrides the default configuration settings. These settings
# are stored in the MDM System Defaults configuration file, which is found
# at the following location.
#
# /usr/share/mdm/defaults.conf.
#
# Default settings are first overriden by you distribution in /usr/share/mdm/distro.conf
# and then by the settings present in this file.
#
# This file contains comments about the meaning of each configuration option,
# so is also a useful reference. In short, to hand-edit
# this file, simply add or modify the key=value combination in the
# appropriate section in the template below this comment section.
#
# For example, if you want to specify a different value for the Enable key
# in the "[debug]" section of your MDM System Defaults configuration file,
# then add "Enable=true" in the "[debug]" section of this file. If the
# key already exists in this file, then simply modify it.
#
# If you hand edit a MDM configuration file, you can run the following
# command and the MDM daemon will immediately reflect the change. Any
# running MDM GUI programs will also be notified to update with the new
# configuration.
#
# mdmflexiserver --command="UPDATE_CONFIG <configuration key>"
#
# e.g, the "Enable" key in the "[debug]" section would be "debug/Enable".
#
# You can also run mdm-restart or mdm-safe-restart to cause MDM to restart and
# re-read the new configuration settings. You can also restart MDM by sending
# a HUP or USR1 signal to the daemon. HUP behaves like mdm-restart and causes
# any user session started by MDM to exit immediately while USR1 behaves like
# mdm-safe-restart and will wait until all users log out before restarting MDM.
#
#
# NOTE: Lines that begin with "#" are considered comments.
#
# Have fun!
[daemon]
Greeter=/usr/lib/mdm/mdmlogin
[security]
[xdmcp]
[gui]
[greeter]
[chooser]
[debug]
# Note that to disable servers defined in the MDM System Defaults
# configuration file (such as 0=Standard, you must put a line in this file
# that says 0=inactive, as described in the Configuration section of the MDM
# documentation.
#
[servers]
# Also note, that if you redefine a [server-foo] section, then MDM will
# use the definition in this file, not the MDM System Defaults configuration
# file. It is currently not possible to disable a [server-foo] section
# defined in the MDM System Defaults configuration file.
#
-
Aşağıdaki komut ile mdm.conf dosyasını açınız,
sudo gedit /etc/mdm/mdm.conf
Aşağıdaki satırları,
[daemon]
Greeter=/usr/lib/mdm/mdmlogin
aşağıdaki şekilde değiştirip dosyayı kaydetmeyi deneyiniz.
[daemon]
DefaultSession=cinnamon.desktop
-
Maalesef üstad.
Israrla Mate açılıyor.
Mate'i kaldırdım. Bu durumda da direkt Cinnamon açıyor. Oturumu kapatıp, mdmlogin çalıştığında LXDE/Openbox seçsem dahi ısrarla Cinnamon.
Formatlayıp tekrar kurmak da hızlı bir çözüm ama sebebini bilmemek rahatsız ediyor:)
-
Başka bir görüntü yöneticisi kurmak denenebilir. Aşağıdaki komutlar ile LightDM görüntü yöneticisini kurabilirsiniz.
sudo apt-get install --no-install-recommends lightdm lightdm-gtk-greeter
Bakalım bu görüntü yöneticisi ile durum ne olacak?
-
Malesef bunu kuramıyorum.
Terminal aşağıdaki pozisyonda sabit kaldı:
0% [Bağlanılıyor archive.ubuntu.com (91.189.91.23)]
-
Malesef bunu kuramıyorum.
Terminal aşağıdaki pozisyonda sabit kaldı:
0% [Bağlanılıyor archive.ubuntu.com (91.189.91.23)]
Depolara bağlanırken bir sıkıntı olmuş olmalı. Tekrar deneyebilir misiniz?
sudo apt-get update çıktısını yollayabilir misiniz?
-
apt-get update sorun yaratmadı. Buna rağmen depoları sıfırlayıp tekrar denedim, bu sefer yükledi.
Şu anda sorun kalmadı İlginç tarafı, mdm login kullanmaya geri döndüğümde de sorun kalmadı artık.
Teşekkürler üstad.
Ancak lightdm yükleyince mdm login i de tekrar çalışır hale getiren nedir onu anlayamadım :)
-
Aslında bu iki görüntü yöneticisinin birbiriyle hiç bir bağımlılığı yok. Belki meta paketlerden biri hatalı olarak MDM ile ilgili bir dosyayı kaldıyor olabilir, bu çözümlemek biraz zor ve karışık olacaktır.
Çözülen başlıklarımız için: http://forum.linuxmint.net.tr/index.php?topic=2058.0