Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: CrossKindar - 22 Mart 2015, 16:46:42
-
Arkadaşlar ekran parlıklığı bilgisayarı ilk açtığımda sarj takılı ise 100 değilse daha düşük bir seviyede açılıyor fn tuşu ile birlikte arttırıp azaltma işlemini uyguladığımda gösterge çalışıyor ama parlaklıkta bir değişme söz konusu bile olmuyor forumda biraz araştırdım şu http://forum.linuxmint.net.tr/index.php?topic=136.msg926#msg926 (http://forum.linuxmint.net.tr/index.php?topic=136.msg926#msg926) konudaki grub dosyası değişikliklerini uyguladım, 4. seviye gelen çekirdek güncellemesini yaptım ama bir değişiklik olmadı . .
Sistemim ile ilgili bilgi :
System: Host: linuxmint-RV420-RV520-RV720-E3530-S3530-E3420-E3520 Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: N/A Distro: Linux Mint 17.1 Rebecca
Machine: System: SAMSUNG (portable) product: RV420/RV520/RV720/E3530/S3530/E3420/E3520 version: 0.1
Mobo: SAMSUNG model: RV420/RV520/RV720/E3530/S3530/E3420/E3520 version: FAB1
Bios: Phoenix version: 04PQ date: 09/03/2011
CPU: Dual core Intel Core i5-2410M CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9179.76
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 2300.00 MHz
Graphics: Card: NVIDIA GF119M [GeForce GT 520M] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: nvidia (unloaded: fbdev,vesa,nouveau) Resolution: 1366x768@60.0hz
GLX Renderer: GeForce GT 520M/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 331.113 Direct Rendering: Yes
Audio: Card-1: Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Card-2: NVIDIA GF119 HDMI Audio Controller driver: snd_hda_intel bus-ID: 01:00.1
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: 2000 bus-ID: 03:00.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: e8:03:9a:19:32:82
Card-2: Broadcom BCM4313 802.11bgn Wireless Network Adapter driver: bcma-pci-bridge bus-ID: 02:00.0
IF: wlan0 state: up mac: e0:ca:94:1c:cb:57
Drives: HDD Total Size: 500.1GB (1.4% used) 1: id: /dev/sda model: ST500LM012_HN size: 500.1GB
Partition: ID: / size: 221G used: 6.4G (4%) fs: ext4
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 183 Uptime: 52 min Memory: 669.7/3932.7MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4
-
Aşağıdaki komutun çıktısını paylaşınız.
cat /etc/X11/xorg.conf
-
Buyrun
cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.113 (buildmeister@swio-display-x64-rhel04-03) Mon Dec 1 21:15:34 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
-
Aşağıdaki komutla xorg.conf dosyasını açıp,
sudo pluma /etc/X11/xorg.conf
aşağıdaki Section "Device" bölümüne,
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Option "RegistryDwords" "EnableBrightnessControl=1" satırını ekleyip dosyayı kaydedin.
(Not: Satır girdilerine dikkat ediniz.)
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "RegistryDwords" "EnableBrightnessControl=1"
EndSection
Düzenleme sonrası sisteminizi yeniden başlatmayı deneyiniz.
-
Hocam dosyaya eklemeyi yaptım sistemi yeniden başlattım, şimdi değişiklik oldu fakat normal değerlerde olduğunu sanmıyorum parlaklık en üst seviyedeki hali sarja takmadan açtığımda olduğu gibi gözüküyor daha üst seviyeye çıkamıyor ama azalttıkca daha da karanlık olabiliyor :) tutturamadık bir ortasını :D
-
Birde buradaki (https://forum.ubuntu-tr.net/index.php?topic=31551.msg378210#msg378210) çözüm denenebilir. Önceki konunuzda PPA deposunu eklediğiniz için sizin sadece şu komutu vermeniz yeterli olacaktır. Bu komutla samsung-backlight kurulur. Sistemi yeniden başlattığınızda parlaklık değiştirme tuşlarının çalışması gerekiyor.
sudo apt-get install samsung-backlight
-
Şöyle bişey oldu fn ile bastıgım zaman değişiklik oluyor buraya kadar normal ama parlaklığı azalttıkça tekrar yükselttiğimde en yüksek seviyeye ulaşmıyor ama eğer yapabileceğimiz başka birşey yoksa bir tık azalttıgımda benim için yeterli seviyede olmus oldu bu şekilde kullanabilirim teşekkürler destekleriniz için...