Linux Mint Türkiye
Yazılım => Wine / PlayonLinux / Virtualbox => Konuyu başlatan: Scipio - 18 Nisan 2015, 13:23:43
-
Wine ile kurduğum CKII'yi açmaya kalktığımda "tespit edilen ekran kartı 512 mb hafızaya sahip değil, Crusader Kings II 512 mb video hafızasına ihtiyaç duyar" şeklinde hata veriyor.
Ekran kartım GeForce GTX 850M ve 2 GB hafızaya sahip.
-
http://forum.linuxmint.net.tr/index.php?topic=2738.0
-
3.19.2-031902-generic x86_64
Graphics: Card: Intel 4th Gen Core Processor Integrated Graphics Controller
X.Org: 1.15.1 drivers: (unloaded: fbdev,vesa) FAILED: nouveau,intel Resolution: 1366x768@60.0hz
GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.1.3
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev ff)
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
eDP1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 345mm x 194mm
1366x768 60.0*+
1360x768 59.8 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)cat: /etc/X11/xorg.conf: No such file or directory
-
Ek olarak aşağıdaki komutların çıktılarını da rica edelim.
optirun -vvv glxgears
cat /etc/bumblebee/bumblebee.conf
cat /etc/bumblebee/xorg.conf.nvidia
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
-
İlk komutta bir pencere açıldı dişliler falan döndü. Belli aralıklarla çıktı veriyordu kapattıktan sonrakileri veriyorum:
[ 176.857684] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 176.858230] [INFO]Configured driver: nvidia
[ 176.858468] [DEBUG]optirun version 3.2.1 starting...
[ 176.858505] [DEBUG]Active configuration:
[ 176.858526] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 176.858546] [DEBUG] X display: :8
[ 176.858567] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-346:/usr/lib32/nvidia-346
[ 176.858588] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 176.858611] [DEBUG] Accel/display bridge: auto
[ 176.858632] [DEBUG] VGL Compression: proxy
[ 176.858653] [DEBUG] VGLrun extra options:
[ 176.858673] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 176.858736] [DEBUG]Using auto-detected bridge virtualgl
[ 177.897154] [INFO]Response: Yes. X is active.
[ 177.897167] [INFO]Running application using virtualgl.
[ 177.897241] [DEBUG]Process vglrun started, PID 2627.
10588 frames in 5.0 seconds = 2117.497 FPS
10516 frames in 5.0 seconds = 2103.180 FPS
10529 frames in 5.0 seconds = 2105.747 FPS
10591 frames in 5.0 seconds = 2118.119 FPS
10456 frames in 5.0 seconds = 2091.137 FPS
10617 frames in 5.0 seconds = 2123.257 FPS
10643 frames in 5.0 seconds = 2128.438 FPS
10509 frames in 5.0 seconds = 2101.687 FPS
10282 frames in 5.0 seconds = 2056.286 FPS
[VGL] ERROR: in readback--
[VGL] 247: Window has been deleted by window manager
[ 226.234899] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 226.234941] [DEBUG]Socket closed.
[ 226.234959] [DEBUG]Killing all remaining processes.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-346
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-346:/usr/lib32/nvidia-346
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-346/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
ii bumblebee 3.2.1-90~trustyppa1 amd64 NVIDIA Optimus support
ii bumblebee-nvidia 3.2.1-90~trustyppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
rc nvidia-304 304.125-0ubuntu0.0.1 amd64 NVIDIA legacy binary driver - version 304.125
ii nvidia-346 346.59-0ubuntu0~xedgers14.04.1 amd64 NVIDIA binary driver - version 346.59
ii nvidia-settings 346.47-0ubuntu1~xedgers14.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20131127-1~trustyppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20131127-1~trustyppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20131127-1~trustyppa1 i386 Shared libraries for primus
ii primus-libs-ia32 20131127-1~trustyppa1 i386 Shared libraries for primus (32-bit)
-
Bumblebee ile ilgili sorun yok sanırım.
Oyunun başlatıcı dosyasını sağ tık Özellikler ile açınız ve komut kısmının başına optirun eklemeyi deneyiniz.
optirun wine /oyunun/hedefi/oyun.exe
-
Şöyle bir komut kısmı var:
env WINEPREFIX="/home/bunyo/.wine" wine C:\\windows\\command\\start.exe /Unix /home/bunyo/.wine/dosdevices/c:/users/Public/Desktop/Crusader\ Kings\ II\ Way\ of\ Life.lnkBaşına falan ekleme yaptım açılmadı. Ne şekil olacak?
-
Masaüstünde yeni bir başlatıcı oluşturun, sağ tık => Burada yeni bir başlatıcı oluştur... .
Açılan pencerede Komut (Command) kısmının karşısından Gözat (Browse) düğmesine tıklayın ve oyunu başlatan .exe uzantılı dosyayı bularak açınız.
(Dosya gizli .wine dizini altında olmalı.)
Satırda oluşan komutun başına optirun wine komutunu eklemeyi deneyin.
-
Yaptım şimdi ama olmadı. Böyle pencere açılırken ki animasyon oluşuyor ama açılmıyor. Önceki seferde de aynısı oluyordu.
-
[member=265]Scipio[/member] optirun komutu ile başka bir oyunu çalıştırabiliyor musunuz?
-
Ancak deneme fırsatım oldu. Counter Strike 1.6 ile denedim. Oyun normalde açılıyor ama optirun wine komutu ile açılmadı.
-
Niye Wine ile acmaya calistiniz ki?
Konu eski biliyorum ama hala inceleyen ziyaretci oldugunu gordum kim nerede bolumunden
Native olarak Linux destegi var Crusader Kings2 nin.
http://store.steampowered.com/app/203770/?l=turkish
Wine ile ugrasmaya gerek yok