Linux Mint Türkiye
Linux Mint Destek => Masaüstü Ortamları => Cinnamon Masaüstü => Konuyu başlatan: Scipio - 17 Haziran 2015, 09:13:42
-
Cinnamon masaüstü açılılşta çöküyor. Bunun içinde günlük geliştirici deposundan güncelleme yaptım. Tamamen kaldırıp yeniden yükledim. Yine de çözülmedi.
-
Fallback kipinde masaüstüne ulaşabiliyorsanız aşağıdaki komutlar ile ayarları sıfırlamayı dener misiniz?
gsettings reset-recursively org.cinnamon
mv ~/.config/dconf/user ~/.config/dconf/user.ydk
-
İşe yaramadı.
-
Aşağıdaki komutların çıktılarına bakalım.
uname -r
glxinfo | grep render
Ek olarak aşağıdaki komutu uçbirimde çalıştırınız.
cinnamon --replace 2> cinnamon
Bu komut kullanıcı ev dizini altında cinnamon isimli bir dosya oluşturur. Bunun içeriğini foruma yapıştırınız.
-
3.16.0-30-generic
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
libEGL warning: GLX/DRI2 is not supported
(cinnamon:2469): GLib-CRITICAL **: g_strsplit: assertion 'string != NULL' failed
(cinnamon:2469): Clutter-CRITICAL **: Unable to initialize Clutter: The OpenGL version could not be determined
Window manager error: Unable to initialize Clutter.
-
Sorun 3D OpenGL hızlandırma sebebiyle oluşmuş, şu an ki çıktılara göre etkin değil. Aşağıdaki komutların çıktılarına da bakalım.
lspci | egrep 'VGA|3D|Display'
cat /etc/X11/xorg.conf
dpkg -l | grep 'bumblebee|nvidia|fglrx'
GPU ile ilgili herhangi bir yapılandırma yapmış mıydınız?
-
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev a2)
cat: /etc/X11/xorg.conf: No such file or directory
Son komuta çıktı vermedi.
Ekran kartı sürücüsünü nvidia-349'a güncellemiştim.
http://forum.linuxmint.net.tr/index.php?topic=2766.0
-
Son komuta çıktı vermedi.
Onun yerine aşağıdaki komutların çıktılarına bakalım.
optirun -vvv glxgears
cat /etc/bumblebee/bumblebee.conf
cat /etc/bumblebee/xorg.conf.nvidia
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
-
[ 1499.070613] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1499.070763] [INFO]Configured driver: nvidia
[ 1499.070853] [DEBUG]optirun version 3.2.1 starting...
[ 1499.070858] [DEBUG]Active configuration:
[ 1499.070860] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1499.070861] [DEBUG] X display: :8
[ 1499.070863] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-349:/usr/lib32/nvidia-349
[ 1499.070873] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1499.070874] [DEBUG] Accel/display bridge: auto
[ 1499.070876] [DEBUG] VGL Compression: proxy
[ 1499.070877] [DEBUG] VGLrun extra options:
[ 1499.070879] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1499.070914] [DEBUG]Using auto-detected bridge virtualgl
[ 1501.302014] [INFO]Response: No - error: [XORG] (EE) No devices detected.
[ 1501.302028] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ 1501.302031] [DEBUG]Socket closed.
[ 1501.302044] [ERROR]Aborting because fallback start is disabled.
[ 1501.302047] [DEBUG]Killing all remaining processes.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-349
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-349:/usr/lib32/nvidia-349
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-349/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
ii bumblebee 3.2.1-90~trustyppa1 amd64 NVIDIA Optimus support
ii nvidia-349 349.16-0ubuntu0~xedgers14.04.1 amd64 NVIDIA binary driver - version 349.16
ii nvidia-settings 352.09-0ubuntu0~xedgers14.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii virtualgl 2.3.3-1~trustyppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.3.3-1~trustyppa1 amd64 Library files for virtualgl
-
Aşağıdaki komutla kurulumu tekrar deneyelim.
sudo apt-get install --reinstall bumblebee nvidia-349 bumblebee-nvidia primus virtualgl linux-headers-generic
Kurulum sonrasında /etc/bumblebee/bumblebee.conf dosyasını nvidia-349'a göre yeniden düzenlemeniz gerekebilir.
[ 1501.302028] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
Sonrasında yukarıdaki sorun devam ederse buradaki (http://forum.linuxmint.net.tr/index.php?topic=1969.msg12458#msg12458) düzenlemeyi yapmayı deneyiniz.
-
Eski çekirdekle yani 3.13 çekirdeği ile sistemi açmayı deneyin. Benzeri sorunu bende yaşamıştım.
-
[member=8]Butterfly[/member],
Tamamdır düzeldi ama normalinden geçaçıldı bu sefer.
-
Geç açılma sorunu devam ederse yeni bir konu altında aşağıdaki komutun çıktısı ile çözüm aramak denenebilir.
dmesg
Bu konu ile ilgili sorun çözüldü ise etiketleyip kilitlemek daha uygun olacaktır.