Linux Mint Türkiye
Linux Mint Destek => Masaüstü Ortamları => KDE Masaüstü => Konuyu başlatan: hwpplayer1 - 14 Temmuz 2015, 01:16:00
-
Küp efekti için gerekli OpenGL seçeneği hata veriyor.Panel tarafı ve drop down menü seçenekleri tamamen kararıyor.Nerede hasar var acaba ? Teşekkürler.
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > uname -rm
4.1.2-040102-generic x86_64
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > inxi -Gx
Graphics: Card: Intel 4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0
X.Org: 1.15.1 drivers: (unloaded: fbdev,vesa) FAILED: nouveau,intel Resolution: 1600x900@60.0hz
GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev ff)
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > xrandr
Screen 0: minimum 8 x 8, current 1600 x 900, maximum 32767 x 32767
eDP1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 388mm x 219mm
1600x900 60.0*+
1440x900 59.9
1368x768 60.0
1360x768 59.8 60.0
1152x864 60.0
1280x720 60.0
1024x768 60.0
1024x576 60.0
960x540 60.0
800x600 60.3 56.2
864x486 60.0
800x450 60.0
640x480 59.9
720x405 60.0
640x360 60.0
HDMI1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > sudo cat /etc/X11/xorg.conf
[sudo] password for hwpplayer1:
cat: /etc/X11/xorg.conf: No such file or directory
-
Aradığınız şey burada : [Nasıl] Intel + Nvidia Optimus Destekli Hibrid GPU İçin Bumblebee Kurulumu (http://forum.linuxmint.net.tr/index.php?topic=78.msg401#msg401)
-
Aradığınız şey burada : [Nasıl] Intel + Nvidia Optimus Destekli Hibrid GPU İçin Bumblebee Kurulumu (http://forum.linuxmint.net.tr/index.php?topic=78.msg401#msg401)
Buradan devam etmemiz uygunsa yazıyorum :
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > optirun -vvv glxgears
[ 8694.936563] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 8694.937107] [INFO]Configured driver: nvidia
[ 8694.937347] [DEBUG]optirun version 3.2.1 starting...
[ 8694.937386] [DEBUG]Active configuration:
[ 8694.937409] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 8694.937430] [DEBUG] X display: :8
[ 8694.937452] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-352:/usr/lib32/nvidia-352
[ 8694.937475] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 8694.937496] [DEBUG] Accel/display bridge: auto
[ 8694.937517] [DEBUG] VGL Compression: proxy
[ 8694.937538] [DEBUG] VGLrun extra options:
[ 8694.937559] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 8694.937667] [DEBUG]Using auto-detected bridge virtualgl
[ 8696.317145] [INFO]Response: Yes. X is active.
[ 8696.317162] [INFO]Running application using virtualgl.
[ 8696.317279] [DEBUG]Process vglrun started, PID 18894.
11783 frames in 5.0 seconds = 2356.433 FPS
11952 frames in 5.0 seconds = 2390.345 FPS
[VGL] ERROR: in readback--
[VGL] 247: Window has been deleted by window manager
[ 8706.565270] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 8706.565313] [DEBUG]Socket closed.
[ 8706.565360] [DEBUG]Killing all remaining processes.
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-352
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-352:/usr/lib32/nvidia-352
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-352/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii bumblebee 3.2.1-90~trustyppa1 amd64 NVIDIA Optimus support
ii bumblebee-nvidia 3.2.1-90~trustyppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
rc nvidia-331 331.113-0ubuntu0.0.4 amd64 NVIDIA binary driver - version 331.113
rc nvidia-349 349.16-0ubuntu0~xedgers14.04.1 amd64 NVIDIA binary driver - version 349.16
ii nvidia-352 352.21-0ubuntu0~xedgers14.04.1 amd64 NVIDIA binary driver - version 352.21
ii nvidia-common 1:0.2.91.4linuxmint1 amd64 transitional package for ubuntu-drivers-common
ii nvidia-settings 352.21-0ubuntu0~xedgers14.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20131127-1~trustyppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20131127-1~trustyppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20131127-1~trustyppa1 i386 Shared libraries for primus
ii primus-libs-ia32 20131127-1~trustyppa1 i386 Shared libraries for primus (32-bit)
ii virtualgl 2.3.3-1~trustyppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.3.3-1~trustyppa1 amd64 Library files for virtualgl
hwpplayer1[member=612]hwpplayer1[/member]-Aspire-V3-772G:~ > lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev ff)
Bana öyle geliyor ki Bumblebee sorunsuz çalışıyor.Sorun küçük bir yazılım parçasında olabilir.Nomodeset ile açmayı denersem düzelebilir.Teşekkürler.
-
17.1 sürümünde bende de benzer hatalar vermişti ama 17.2 sürümünde gayet güzel çalışıyor ve her yönden daha kararlı.