Linux Mint Türkiye
Linux Mint Destek => Donanım => Ses Kartları => Konuyu başlatan: dirent - 08 Aralık 2015, 14:50:29
-
Selam,
Bilgisayarı baştan başlattıktan sonra ki en son nss-myhostname kurmuştum, panelde ses uygulamacığı kayboldu, açılışta ses çalmadı.
PulseAudio'yu açmaya çalışınca şağıdaki gibi hata veriyor.
(http://s10.postimg.org/5p4qgeae1/Ekran_G_r_nt_s_2015_12_08_14_43_41.png) (http://postimage.org/)
Pulseaudio'yu tamamen kaldırıp baştan yükledim yine açılmayıp aynı hatayı verdi.
netice itibariyle hiç ses alamıyorum Rica etsem yardımcı olur musunuz?
Çıktılar:
inxi -A
Audio: Card-1: NVIDIA High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.16.0-53-generic
Card-2: Creative Labs SB Audigy driver: snd_emu10k1 uname -rm
3.16.0-53-generic i686
cat /proc/asound/card0/codec#* | grep Codec
Codec: Nvidia GPU 0b HDMI/DP
Codec: Nvidia GPU 0b HDMI/DP
Codec: Nvidia GPU 0b HDMI/DP
Codec: Nvidia GPU 0b HDMI/DP
cat /proc/asound/modules
0 snd_hda_intel
1 snd_emu10k1
lsmod | grep snd
snd_hda_codec_hdmi 46396 4
snd_emu10k1_synth 13104 0
snd_emux_synth 33529 1 snd_emu10k1_synth
snd_seq_midi_emul 13529 1 snd_emux_synth
snd_seq_virmidi 13220 1 snd_emux_synth
snd_wavefront 34046 0
snd_emu10k1 136953 1 snd_emu10k1_synth
snd_cs4236 29209 0
snd_hda_intel 29285 0
snd_opl3_lib 18651 2 snd_wavefront,snd_cs4236
snd_hda_controller 29252 1 snd_hda_intel
snd_hda_codec 120400 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
snd_wss_lib 25739 2 snd_wavefront,snd_cs4236
snd_util_mem 13821 2 snd_emux_synth,snd_emu10k1
snd_hwdep 13272 5 snd_wavefront,snd_hda_codec,snd_emux_synth,snd_emu10k1,snd_opl3_lib
snd_ac97_codec 105860 1 snd_emu10k1
snd_mpu401_uart 13865 2 snd_wavefront,snd_cs4236
ac97_bus 12642 1 snd_ac97_codec
snd_seq_midi 13324 0
snd_seq_midi_event 14475 2 snd_seq_virmidi,snd_seq_midi
snd_rawmidi 25722 5 snd_wavefront,snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq 56592 5 snd_seq_midi_event,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi
snd_pcm 87194 8 snd_ac97_codec,snd_hda_codec_hdmi,snd_wss_lib,snd_hda_codec,snd_hda_intel,snd_emu10k1,snd_hda_controller,snd_cs4236
snd_seq_device 14137 6 snd_seq,snd_rawmidi,snd_emu10k1_synth,snd_emu10k1,snd_opl3_lib,snd_seq_midi
snd_timer 28648 5 snd_wss_lib,snd_pcm,snd_seq,snd_emu10k1,snd_opl3_lib
snd 66670 18 snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_wss_lib,snd_pcm,snd_seq,snd_rawmidi,snd_wavefront,snd_hda_codec,snd_hda_intel,snd_mpu401_uart,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_device,snd_cs4236,snd_opl3_lib
soundcore 14599 2 snd,snd_hda_codec
aplay -l
**** PLAYBACK Donanım Aygıtlarının Listesi ****
kart 0: NVidia [HDA NVidia], aygıt 3: HDMI 0 [HDMI 0]
Altaygıtlar: 1/1
Altaygıt #0: subdevice #0
kart 0: NVidia [HDA NVidia], aygıt 7: HDMI 0 [HDMI 0]
Altaygıtlar: 1/1
Altaygıt #0: subdevice #0
kart 0: NVidia [HDA NVidia], aygıt 8: HDMI 0 [HDMI 0]
Altaygıtlar: 1/1
Altaygıt #0: subdevice #0
kart 0: NVidia [HDA NVidia], aygıt 9: HDMI 0 [HDMI 0]
Altaygıtlar: 1/1
Altaygıt #0: subdevice #0
kart 1: Audigy2 [SB Audigy 2 ZS [SB0350]], aygıt 0: emu10k1 [ADC Capture/Standard PCM Playback]
Altaygıtlar: 32/32
Altaygıt #0: subdevice #0
Altaygıt #1: subdevice #1
Altaygıt #2: subdevice #2
Altaygıt #3: subdevice #3
Altaygıt #4: subdevice #4
Altaygıt #5: subdevice #5
Altaygıt #6: subdevice #6
Altaygıt #7: subdevice #7
Altaygıt #8: subdevice #8
Altaygıt #9: subdevice #9
Altaygıt #10: subdevice #10
Altaygıt #11: subdevice #11
Altaygıt #12: subdevice #12
Altaygıt #13: subdevice #13
Altaygıt #14: subdevice #14
Altaygıt #15: subdevice #15
Altaygıt #16: subdevice #16
Altaygıt #17: subdevice #17
Altaygıt #18: subdevice #18
Altaygıt #19: subdevice #19
Altaygıt #20: subdevice #20
Altaygıt #21: subdevice #21
Altaygıt #22: subdevice #22
Altaygıt #23: subdevice #23
Altaygıt #24: subdevice #24
Altaygıt #25: subdevice #25
Altaygıt #26: subdevice #26
Altaygıt #27: subdevice #27
Altaygıt #28: subdevice #28
Altaygıt #29: subdevice #29
Altaygıt #30: subdevice #30
Altaygıt #31: subdevice #31
kart 1: Audigy2 [SB Audigy 2 ZS [SB0350]], aygıt 2: emu10k1 efx [Multichannel Capture/PT Playback]
Altaygıtlar: 8/8
Altaygıt #0: subdevice #0
Altaygıt #1: subdevice #1
Altaygıt #2: subdevice #2
Altaygıt #3: subdevice #3
Altaygıt #4: subdevice #4
Altaygıt #5: subdevice #5
Altaygıt #6: subdevice #6
Altaygıt #7: subdevice #7
kart 1: Audigy2 [SB Audigy 2 ZS [SB0350]], aygıt 3: emu10k1 [Multichannel Playback]
Altaygıtlar: 1/1
Altaygıt #0: subdevice #0
kart 1: Audigy2 [SB Audigy 2 ZS [SB0350]], aygıt 4: p16v [p16v]
Altaygıtlar: 1/1
Altaygıt #0: subdevice #0
-
/etc/pulse/client.conf dosyasını düzenlediniz mi? Aşağıdaki komutun çıktısına bakalım.
cat /etc/pulse/client.conf
Aşağıdaki komutlarla Pulse Audio kullanıcı ayar dizinini silip servisi yeniden başlatmayı deneyebilirsiniz.
rm -rf ~/.config/pulse
pulseaudio -k
-
istediğiniz çıktı:
cat /etc/pulse/client.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
Pulse Audio kullanıcı ayar dizinini silip servisi yeniden başlatayım mı?
-
Deneyin. Sorun çözülmezse aşağıdaki komutu çalıştırmayı deneyin.
start-pulseaudio-x11
-
Dediklerinizi yaptım sorun çözüldü.
Teşekkür ederim.
-
Sistemi yeniden başlatıp sorunun çözüldüğünü teyit edebilir misiniz?
-
Sistemi yeniden başlatıp sorunun çözüldüğünü teyit edebilir misiniz?
Evet, evet.
start-pulseaudio-x11komutundan sonra Pulse Audio açıldı ve ses almaya başladım. Paneldeki ses uygulamacığı gelmemişti. Panele Uygulamacık Ekle'ye girip, panele ekli olduğu halde görünmeyen ses uygulamacığına önce panelden kaldır sonra ekle dedim o da geldi.
Teşekkürler : )