Linux Mint Türkiye
Linux Mint Destek => Genel => Konuyu başlatan: RaskanNikof - 20 Mart 2016, 23:04:02
-
Herkese Merhaba
Windows 10 kullanıcısıydım . Baktım bu böyle gitmiyor . Arkadaşımın da tavsiyesiyle linux mint kullanmaya karar verdim .. cihazımda bir adet 256 GB SSD var bir de 1 TB HDD vardı .. harddiskin içinde önemli dosyalarım var .. ve ben de HDD yi çıkarıp format attım .. ne yazıkki tekrar taktığımda [Konum Bağlanamadı] hatası aldım yukarıdaki bir arkadaşta olduğu gibi .. şimdi ise HDD min içeriğine ulaşamıyorum . Dosyalarım önemli olmasaydı format atabilirdim fakat gerçekten çok önemli ..
inxi -Fxz
System: Host: monsterpc Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: Cinnamon 2.8.6 (Gtk 3.10.8~8+qiana)
Distro: Linux Mint 17.3 Rosa
Machine: System: Micro-Star product: GE70 2PC v: REV:1.0
Mobo: Micro-Star model: MS-1759 v: REV:0.B
Bios: American Megatrends v: E1759IMS.62D date: 04/13/2015
CPU: Dual core Intel Core i5-4210H (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11573
clock speeds: max: 3500 MHz 1: 2261 MHz 2: 1499 MHz 3: 1887 MHz
4: 1499 MHz
Graphics: Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller
bus-ID: 00:02.0
Card-2: NVIDIA GM107M [GeForce GTX 850M] bus-ID: 01:00.0
Display Server: X.Org 1.17.1 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau
Resolution: 1920x1080@60.0hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0
Sound: Advanced Linux Sound Architecture v: k3.19.0-32-generic
Network: Card-1: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller
driver: alx port: d000 bus-ID: 04:00.0
IF: eth0 state: down mac: <filter>
Card-2: Intel Wireless 3160
driver: iwlwifi v: in-tree: bus-ID: 05:00.0
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 1256.3GB (4.8% used)
ID-1: /dev/sda model: HGST_HTS721010A9 size: 1000.2GB
ID-2: /dev/sdb model: Crucial_CT256MX1 size: 256.1GB
Partition: ID-1: / size: 227G used: 49G (23%) fs: ext4 dev: /dev/sdb3
ID-2: /boot size: 454M used: 48M (12%) fs: ext4 dev: /dev/sdb2
ID-3: swap-1 size: 8.19GB used: 0.00GB (0%) fs: swap dev: /dev/sdb1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 33.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 198 Uptime: 16 min Memory: 569.4/7905.0MB
Init: Upstart runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111) inxi: 2.2.28
Mesajlar Birleştirildi.
Şuan Dualboot değil sadece mint var ssd de :)
-
[member=2266]RaskanNikof[/member], aşağıdaki komutların çıktılarına da bakalım.
sudo fdisk -l
sudo parted -l
sudo lsblk
-
Buyrun Hocam .. sudo fdisk -l için :
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x6e697373
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sda1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part
Partition 1 does not start on physical sector boundary.
/dev/sda2 ? 1917848077 2462285169 272218546+ 73 Unknown
Partition 2 does not start on physical sector boundary.
/dev/sda3 ? 1818575915 2362751050 272087568 2b Unknown
Partition 3 does not start on physical sector boundary.
/dev/sda4 ? 2844524554 2844579527 27487 61 SpeedStor
Partition 4 does not start on physical sector boundary.
Partition table entries are not in disk order
Disk /dev/sdb: 256.1 GB, 256060514304 bytes
255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000e7c15
Device Boot Start End Blocks Id System
/dev/sdb1 2048 16001023 7999488 82 Linux swap / Solaris
/dev/sdb2 * 16001024 16977919 488448 83 Linux
/dev/sdb3 16977920 500117503 241569792 83 Linux
sudo parted -l
Model: ATA HGST HTS721010A9 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Number Start End Size File system Flags
1 0,00B 1000GB 1000GB ntfs
Model: ATA Crucial_CT256MX1 (scsi)
Disk /dev/sdb: 256GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 8193MB 8191MB primary linux-swap(v1)
2 8193MB 8693MB 500MB primary ext4 boot
3 8693MB 256GB 247GB primary ext4
sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda2 8:2 0 811,6G 0 part
└─sda3 8:3 0 346,1G 0 part
sdb 8:16 0 238,5G 0 disk
├─sdb1 8:17 0 7,6G 0 part [SWAP]
├─sdb2 8:18 0 477M 0 part /boot
└─sdb3 8:19 0 230,4G 0 part /
-
İlgili diskin disk bölümleme tablosunda sıkıntı var. Aşağıdaki bağlantıda testdisk ile disk bölümleri nasıl kurtarılır anlatılıyor. Bence gece yerine gündüz ve sakin kafayla bağlantıda anlatılan öneriyi uygulamayı deneyin derim.
http://programlar.enpedi.com/2013/12/partedmagic-ve-testdisk-ile-kayp.html
[info]Not: Konuyu bölüp, bu bölüm altında ayrı bir konu oluşturacağım.[/info]