Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: Serdar Sert - 29 Mart 2016, 12:21:12
-
Merhabalar;
Daha öncesinde 17.3 ü yükseltme yoluyla kurmuştum. Sistem sorunsuza yakın çalışıyordu. Sonrasında bazı değişiklikler yapmak için sıfırdan kurulum yaptım. Chrome 'da flash tabanlı bir oyun açıkken ekran anlık olarak kapanıyor ve açılıyor.
Bu sorunu nasıl giderebilirim?
Şimdiden teşekkürler.
-
Chrome tarayıcıyı kapatıp aşağıdaki komutlar ile açınca durum ne oluyor?
google-chrome --disable-gpu
google-chrome-stable --disable-gpu
-
Hocam;
Yaklaşık olarak 10 dakikalık kullanımda hiç o sorunu yapmadı.
-
O zaman aşağıdaki komutla Cinnamon menü düzenleyiciyi açınız.
cinnamon-menu-editor
Menü düzenleyiciden Chrome ile ilgili girdiyi bulup çfit tıklayarak düzenleme kısmını açınız.
Açılan alanda Komut (Command) kısmını aşağıdaki şekilde düzenleyip kaydediniz.
/usr/bin/google-chrome-stable --disable-gpu %U
-
Hocam;
Zahmet veriyorum fakat yukarıda dediklerinizi yapmama rağmen tekrar sorun baş gösterdi.
Dün gece bumlbee-ui kurulumunda sıkıntı yaşadım. Onunla ilgili bir sorun olabilir mi?
-
Chrome uygulamasını optirun ile Nvidia GPU kullanarak açmaya mı çalışyorsunuz?
-
Hayır hocam.
-
Aşağıdaki komutların çıktılarına bakalım.
optirun -vvv glxgears
cat /etc/bumblebee/bumblebee.conf
cat /etc/bumblebee/xorg.conf.nvidia
cat /etc/X11/xorg.conf
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
lspci | egrep 'VGA|3D|Display'
-
Buyurun Hocam;
serdar@Sevtap ~ $ optirun -vvv glxgears
[17263.620534] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[17263.635119] [INFO]Configured driver: nvidia
[17263.635299] [DEBUG]optirun version 3.2.1 starting...
[17263.635308] [DEBUG]Active configuration:
[17263.635310] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[17263.635312] [DEBUG] X display: :8
[17263.635314] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-352:/usr/lib32/nvidia-352
[17263.635316] [DEBUG] Socket path: /var/run/bumblebee.socket
[17263.635319] [DEBUG] Accel/display bridge: auto
[17263.635320] [DEBUG] VGL Compression: proxy
[17263.635322] [DEBUG] VGLrun extra options:
[17263.635324] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[17263.635413] [DEBUG]Using auto-detected bridge virtualgl
[17265.954381] [INFO]Response: Yes. X is active.
[17265.954412] [INFO]Running application using virtualgl.
[17265.954604] [DEBUG]Process vglrun started, PID 8487.
5069 frames in 5.0 seconds = 1013.733 FPS
[VGL] ERROR: in readback--
[VGL] 256: Window has been deleted by window manager
[17275.085474] [DEBUG]SIGCHILD received, but wait failed with No child processes
[17275.085532] [DEBUG]Socket closed.
[17275.085555] [DEBUG]Killing all remaining processes.
serdar@Sevtap ~ $ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-352
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-352:/usr/lib32/nvidia-352
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-352/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
serdar@Sevtap ~ $ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
serdar@Sevtap ~ $ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok
serdar@Sevtap ~ $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii bumblebee 3.2.1-93~trustyppa1 amd64 NVIDIA Optimus support
ii bumblebee-nvidia 3.2.1-93~trustyppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-352 352.79-0ubuntu0~gpu14.04.1 amd64 NVIDIA binary driver - version 352.79
ii nvidia-prime-applet 1.0.3 all An applet for NVIDIA Prime
ii nvidia-settings 364.12-0ubuntu0~gpu14.04.2 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20150328-1~trustyppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20150328-1~trustyppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20150328-1~trustyppa1 i386 Shared libraries for primus
ii primus-libs-ia32 20150328-1~trustyppa1 i386 Shared libraries for primus (32-bit)
ii virtualgl 2.4.1-1~trustyppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.4.1-1~trustyppa1 amd64 Library files for virtualgl
serdar@Sevtap ~ $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev ff)
-
Chrome uygulamasını aşağıdaki komutla başlatmayı deneyin ve durumu gözlemleyin.
optirun google-chrome-stable
-
Hocam yaklaşık 10 dakıkalık kullanımda sorun yok.
-
Menü düzenleyiciden komut kısmını bu şekilde değiştirip kaydedelim.
-
Hocam;
Sorun yine baş gösterdi. Nvidia sürücüsünü yükseltip, nvidia prime ile kullanmayı deneyeceğim. Uygun çözüm yolu olur mu?
-
Nvidia Prime kurup, yırtılma vb. sorunlar için buradaki (https://forum.linuxmint.net.tr/index.php?topic=5130.msg32829#msg32829) paketi de yüklemeyi deneyin.
-
Hocam zahmetleriniz için teşekkür ederim.
Bumlebee yi kaldırıp nvidia prime ı dediğiniz şekilde kurduğumda üzerine üstteki linkte verdiğiniz dosyayı kurduğumda sorun düzeldi. Tek sorun gibi gözüken; conky nın tekrar açılmaması oldu ama sonra tekrar denediğimde o da normale döndü.
Tekrardan bilginize sağlık. Teşekkür ederim.
-
Rica ederiz, güle güle kullanın.