Linux Mint Türkiye
Linux Mint Destek => Donanım => Yazıcılar & Tarayıcılar => Konuyu başlatan: mehmethanifi - 31 Mart 2016, 11:00:12
-
Merhabalar,
Canon Laserjet Shot LBP-1120 kurlumu yapmak için öncelikle http://www.canon-europe.com/support/consumer_products/products/printers/laser/laser_shot_lbp1120.aspx?type=drivers&driverdetailid=tcm:13-1057853&os=Linux%20%2832-bit%29&language=EN sitesinden debian tabanlı sürücüleri indirdim.
gdebi ile çalıştırmak istediğim zaman aşağıda görülen durum oluşuyor.
not: chmod +x komutunu ve chmod 777 komutlarını kullandım.
(http://i.hizliresim.com/PkGOL5.png) (http://hizliresim.com/PkGOL5)
inxi -Fxz
System: Host: almilli Kernel: 3.16.0-38-generic i686 (32 bit, gcc: 4.8.2)
Desktop: Xfce 4.12.2 (Gtk 2.24.23) Distro: Linux Mint 17.2 Rafaela
Machine: Mobo: N/A model: RS/RX482SB400 Bios: Phoenix version: 6.00 PG date: 11/04/2005
CPU: Single core AMD Athlon 64 3200+ (-UP-) cache: 512 KB flags: (lm nx pae sse sse2 sse3) bmips: 1999.98 clocked at 1000.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV710 [Radeon HD 4350/4550] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
GLX Renderer: Gallium 0.4 on AMD RV710 GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card-1: Advanced Micro Devices [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
driver: snd_hda_intel bus-ID: 01:00.1
Card-2: Advanced Micro Devices [AMD/ATI] IXP SB400 AC'97 Audio Controller driver: snd_atiixp bus-ID: 00:14.5
Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic
Network: Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter driver: 8139too ver: 0.9.28 port: de00 bus-ID: 02:0b.0
IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 80.0GB (13.8% used) 1: id: /dev/sda model: SAMSUNG_HD080HJ size: 80.0GB
Partition: ID: / size: 72G used: 11G (16%) fs: ext4 ID: swap-1 size: 1.61GB used: 0.02GB (1%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 46.0C mobo: N/A gpu: 43.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 166 Uptime: 41 min Memory: 543.0/1510.5MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11) inxi: 1.9.17
-
Önce common uzantılı paketi kurmayı deneyin.
-
hocam kurulumu yapıyor şuanda.. sonucu bildireceğim.