Linux Mint Türkiye
Linux Mint Destek => Genel => Konuyu başlatan: venqeful905 - 07 Nisan 2016, 18:23:55
-
Linux Mint 17.3 Cinnamon 64 bit sistemde Uyku Kipi Sorunlu Çalışıyor.
Linux Mint'i ilk yüklediğimde Uyku Kipi 1(Bir) Kere çalıştı sonra tekrar uyku kipine almak istediğimde çalışmadı.
sonra.
sudo update-grubkodunu terminal'e yazdığım zaman. bilgisayarı yeniden başlatıyorum.
sonra tekrar uyku kipini denediğimde çalışıyor. sonra tekrar çalışmıyor. bu hep böyle devam ediyor.
-
Aşağıdaki komutları sırasıyla uçbirimdeçalıştırınız ve çıktılarını paylaşınız.
sudo blkid
cat /etc/fstab
sudo parted -l
sudo lsblk
cat /etc/initramfs-tools/conf.d/resume
cat /etc/default/grub
-
sudo blkid
/dev/sda1: LABEL="Kurtarma" UUID="868831FC8831EB77" TYPE="ntfs"
/dev/sda2: UUID="7C34-3731" TYPE="vfat"
/dev/sda4: UUID="EE726A73726A4087" TYPE="ntfs"
/dev/sda5: LABEL="Yerel Disk" UUID="E4305E0C305DE658" TYPE="ntfs"
/dev/sda6: LABEL="Yeni Birim" UUID="D4A607B1A6079362" TYPE="ntfs"
/dev/sda7: UUID="770d0eb4-c39f-4ea8-9c1c-1df9276c7524" TYPE="ext4"
/dev/sda8: UUID="159ae196-c34f-48bd-8da9-3ddba79a6840" TYPE="swap"
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=770d0eb4-c39f-4ea8-9c1c-1df9276c7524 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=7C34-3731 /boot/efi vfat defaults 0 1
# swap was on /dev/sda8 during installation
UUID=159ae196-c34f-48bd-8da9-3ddba79a6840 none swap sw 0 0
sudo parted -l
Model: ATA TOSHIBA MQ01ABF0 (scsi)
Disk /dev/sda: 500GB
Sektör boyutu (mantıksal/fiziksel): 512B/4096B
Disk bölümü Tablosu: gpt
Numara Başlangıç Son Boyut Dosya sistemi İsim Bayraklar
1 1049kB 473MB 472MB ntfs Basic data partition gizli, diag
2 473MB 578MB 105MB fat32 EFI system partition önyükleme
3 578MB 595MB 16,8MB Microsoft reserved partition msftres
4 595MB 172GB 171GB ntfs Basic data partition msftdata
7 172GB 227GB 55,0GB ext4
8 227GB 236GB 9426MB linux-swap(v1)
5 236GB 463GB 227GB ntfs Basic data partition msftdata
6 463GB 500GB 36,7GB ntfs Basic data partition msftdata
sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465,8G 0 disk
├─sda1 8:1 0 450M 0 part
├─sda2 8:2 0 100M 0 part /boot/efi
├─sda3 8:3 0 16M 0 part
├─sda4 8:4 0 159,2G 0 part
├─sda5 8:5 0 211,9G 0 part /media/cros/Yerel Disk
├─sda6 8:6 0 34,2G 0 part
├─sda7 8:7 0 51,2G 0 part /
└─sda8 8:8 0 8,8G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
cat /etc/initramfs-tools/conf.d/resume
RESUME=UUID=159ae196-c34f-48bd-8da9-3ddba79a6840
cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash resume=/dev/sda8"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
-
Grub ayar dosyasındaki aşağıdaki satırları,
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash resume=/dev/sda8"
GRUB_CMDLINE_LINUX="""
aşağıdaki şekilde değiştirip dosyayı kaydedin.
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="resume=/dev/disk/by-uuid/159ae196-c34f-48bd-8da9-3ddba79a6840"
Ardından aşağıdaki komutları uçbirimde çalıştırınız.
sudo update-grub
sudo update-initramfs -u
-
Evet dedikleriniz işe yaradı. şuan elle uyku kipini başlatırsam sorun çıkmıyor.
bilgisayarın şarjı kritik seviyeye gelince hazırda beklet olarak seçili. şarjı kritik seviyeye gelince hazırda beklet komutunu uyguluyor ama bilgisayarı açmıyor. boot ettikten sonra ekran siyah kalıyor sonra terminal'e felan giremiyorum.
mecbur güç tuşundan kağatıp tekrar açıyorum. açıldıktan sonra tekrar uyku kipini elle çalıştırırsam anlattığım hatayı devam ettiriyor.
sonra terminal'e şu komutları giriyorum
sudo update-grub
sudo update-initramfs -u
sonra tekrar uyku kipini elle çalıştırırsam sıkıntı yokken tekrar şarj kritik seviyeye gelip hazırda beklet uygularsa yukardaki sorunu tekrarlıyor.
-
Sarj kritik seviyeye geldiğinde kapanırken verilerin yazılmasını sağlayacak yeterli enerji var mı? Yani sistem kapanırken verileri yazabilmek için yeterli pil düzeyi yoksa veriler yazılmıyor olabilir.