Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: minimin - 17 Nisan 2016, 11:28:32
-
Sürücüleri silip kurdum olmadı, bumblebee.conf ta kernel driverı nvidia, nvidia-current, nvidia-361 olarak denedim olmadı yardım edebilir msiniz?
Linux Mint 17.3 Mate
sudo optirun glxgears
[ 367.858725] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 367.858739] [ERROR]Could not connect to bumblebee daemon - is it running?
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-361
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-361:/usr/lib32/nvidia-361
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-361/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii bumblebee 3.2.1-93~trustyppa1 amd64 NVIDIA Optimus support
ii bumblebee-nvidia 3.2.1-93~trustyppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
rc nvidia-304 304.131-0ubuntu0.14.04.1 amd64 NVIDIA legacy binary driver - version 304.131
ii nvidia-361 361.42-0ubuntu0~gpu14.04.1 amd64 NVIDIA binary driver - version 361.42
ii nvidia-settings 364.15-0ubuntu0~gpu14.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20150328-1~trustyppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20150328-1~trustyppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20150328-1~trustyppa1 i386 Shared libraries for primus
ii primus-libs-ia32 20150328-1~trustyppa1 i386 Shared libraries for primus (32-bit)
ii virtualgl 2.4.1-1~trustyppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.4.1-1~trustyppa1 amd64 Library files for virtualgl
Düzenleme: Yazım. Başlık düzenlendi.
karakartala
-
Şuradaki öneriyi deneyebilirsiniz: https://forum.linuxmint.net.tr/index.php?topic=78.msg34944#msg34944
-
Şuradaki öneriyi deneyebilirsiniz: https://forum.linuxmint.net.tr/index.php?topic=78.msg34944#msg34944
denedim malesef sonuç olumsuz
-
Komutların çıktısına bakalım.
inxi -SGx
optirun -vvv glxgears
-
Komutların çıktısına bakalım.
inxi -SGx
optirun -vvv glxgears
inxi -SGx
System: Host: moon Kernel: 4.5.1-040501-generic x86_64 (64 bit gcc: 5.2.1)
Desktop: MATE 1.12.0 (Gtk 3.10.8~8+qiana)
Distro: Linux Mint 17.3 Rosa
Graphics: Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller
bus-ID: 00:02.0
Card-2: NVIDIA GM107M [GeForce GTX 860M] bus-ID: 01:00.0
Display Server: X.Org 1.17.1 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.0hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes
optirun -vvv glxgears
[18790.028194] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[18790.028377] [INFO]Configured driver: nvidia
[18790.028406] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[18790.028409] [DEBUG]Socket closed.
[18790.028414] [ERROR]Could not connect to bumblebee daemon - is it running
-
Aşağıdaki komutu uçbirimde çalıştırıp çıktısını paylaşınız.
sudo service bumblebeed restart
-
Aşağıdaki komutu uçbirimde çalıştırıp çıktısını paylaşınız.
sudo service bumblebeed restart
stop: Unknown instance:
bumblebeed start/running, process 4884
bu arada virtualbox başlatmada sorun yaşıyorum kernel ile ilgili,
sanırım şuan ki kernel sistemde sorun yaratıyor ilk kurduğumda 3.19du.
şimdi yeniden kurulum yapıcam. sormak istediğim linux mint 18 çıktığında programlarımın ve yapılandırmalaraının kaybetmek istemiyorum. hazır tekrardan kurulum yapacakken ilerdeki güncellemede sorun yaşamamak için sadece /home klasörünü ayırmam yeterli mi
-
Aynı konu içinde birden fazla soru ve sorun hakkında konuşmuyoruz. Bu konunun kapsamı dışına çıkmayalım.
Güncelleme Yönetici => Görünüm menüsü => Linux çekirdekleri bölümünden depodaki en güncel çekirdeği (şu an 4.4.0-18 sürüm) kurup sistemi bununla açamayı deneyebilirsiniz.