Linux Mint Türkiye
Linux Mint Destek => Ağ / Internet / Network => Konuyu başlatan: JAGGAN - 28 Haziran 2016, 22:55:01
-
Sürücüyü nasıl kurabilirim 2. konu açtığım için özür dilerim dağa mesaj yazamadım diğerine usb wifi adaptörünü takınca görmüyor bilgisayarda sürücüyü kurucam fakat nasıl kurucağımı bilmiyorum
Ralink Tech Inc.
Modelname = Rt2870 Wireless lan linux driver
ağ konusu açarkenki bi konu var sabit konu olarak onları yazıcaktım fakat diğer bilgisayarımda internet olmadığı için atamıyorum kusura bakmayın affedin
-
Çıktıları görmeden, hangi sürücünün aktif olduğunu, hangi çekirdeğin yüklü olduğunu görmeden, bilmeden size nasıl yardımcı olabiliriz ? çıktıları bir not defterine alın, sonra flash belleğe atın, internetiniz olan bilgisayarınızdan paylaşın.
-
2 bilgisayardada linux mint var bu attığım kodlar laptopdan wifi alıcısı var benım yapmak istediğim masaüstüne(not usb wifiyi takmadan yazdım)
inxi -snx
System: Host: pc-A15 Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: Cinnamon 2.8.6 (Gtk 3.10.8~8+qiana)
Distro: Linux Mint 17.3 Rosa
Network: Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k bus-ID: 02:00.0
IF: wlan0 state: up mac: 00:08:ca:23:9b:ef
Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
driver: atl1c v: 1.0.1.1-NAPI port: b000 bus-ID: 03:00.0
IF: eth0 state: down mac: e8:40:f2:08:9a:4f
pc@pc-A15 ~ $
lspci -nnk | grep -iA2 net
pc@pc-A15 ~ $ lspci -nnk | grep -iA2 net
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: Pegatron Device [1b0a:208d]
Kernel driver in use: atl1c
lsusb
pc@pc-A15 ~ $ lsusb
Bus 002 Device 005: ID 0000:0538
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05c8:032a Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pc@pc-A15 ~ $
rfkill list
pc@pc-A15 ~ $ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
pc@pc-A15 ~ $
sudo lshw -C network
pc@pc-A15 ~ $ sudo lshw -C network
[sudo] password for pc:
*-network
açıklama: Kablosuz arayüz
ürün: AR9285 Wireless Network Adapter (PCI-Express)
üretici: Qualcomm Atheros
physical id: 0
bus info: pci@0000:02:00.0
mantıksal ad: wlan0
sürüm: 01
serial: 00:08:ca:23:9b:ef
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
yapılandırma: broadcast=yes driver=ath9k driverversion=3.19.0-32-generic firmware=N/A ip=192.168.1.105 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
kaynaklar: irq:17 bellek:f6a00000-f6a0ffff
*-network
açıklama: Eternet interface
ürün: AR8151 v2.0 Gigabit Ethernet
üretici: Qualcomm Atheros
physical id: 0
bus info: pci@0000:03:00.0
mantıksal ad: eth0
sürüm: c0
serial: e8:40:f2:08:9a:4f
kapasite: 1Gbit/s
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress vpd bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
yapılandırma: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair
kaynaklar: irq:28 bellek:f6000000-f603ffff ioport:b000(boyut=128)
pc@pc-A15 ~ $
iwconfig | grep Power
pc@pc-A15 ~ $ iwconfig | grep Power
eth0 no wireless extensions.
lo no wireless extensions.
Bit Rate:121.5 Mb/s Tx-Power=15 dBm
Power Management:off
pc@pc-A15 ~ $
lsmod
pc@pc-A15 ~ $ lsmod
Module Size Used by
nls_utf8 16384 0
udf 94208 0
crc_itu_t 16384 1 udf
ctr 16384 1
ccm 20480 1
snd_hda_codec_hdmi 53248 1
bnep 20480 2
rfcomm 69632 0
snd_hda_codec_conexant 24576 1
snd_hda_codec_generic 69632 1 snd_hda_codec_conexant
bluetooth 491520 10 bnep,rfcomm
snd_hda_intel 36864 4 snd_hda_codec_hdmi
snd_hda_controller 32768 1 snd_hda_intel
snd_hda_codec 143360 5 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 20480 1 snd_hda_codec
uvcvideo 90112 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_core 53248 1 uvcvideo
v4l2_common 16384 1 videobuf2_core
videodev 159744 3 uvcvideo,v4l2_common,videobuf2_core
media 24576 2 uvcvideo,videodev
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_seq_midi 16384 0
intel_rapl 20480 0
iosf_mbi 16384 1 intel_rapl
x86_pkg_temp_thermal 16384 0
intel_powerclamp 20480 0
snd_seq_midi_event 16384 1 snd_seq_midi
dm_multipath 24576 0
coretemp 16384 0
snd_rawmidi 32768 1 snd_seq_midi
scsi_dh 16384 1 dm_multipath
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
arc4 16384 2
ghash_clmulni_intel 16384 0
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
cryptd 20480 1 ghash_clmulni_intel
ath9k 147456 0
ath9k_common 32768 1 ath9k
ath9k_hw 458752 2 ath9k_common,ath9k
joydev 20480 0
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
ath 32768 3 ath9k_common,ath9k,ath9k_hw
snd_timer 32768 2 snd_pcm,snd_seq
serio_raw 16384 0
mac80211 708608 1 ath9k
binfmt_misc 20480 1
lpc_ich 24576 0
snd 86016 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
cfg80211 524288 4 ath,ath9k_common,ath9k,mac80211
shpchp 40960 0
soundcore 16384 2 snd,snd_hda_codec
mei_me 20480 0
mei 90112 1 mei_me
mac_hid 16384 0
wmi 20480 0
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,ppdev,parport_pc
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
dm_log 20480 2 dm_region_hash,dm_mirror
hid_generic 16384 0
usbhid 53248 0
hid 110592 2 hid_generic,usbhid
uas 24576 0
usb_storage 69632 1 uas
psmouse 114688 0
i915 1048576 4
ahci 36864 2
libahci 32768 1 ahci
atl1c 49152 0
i2c_algo_bit 16384 1 i915
drm_kms_helper 126976 1 i915
video 20480 1 i915
drm 344064 6 i915,drm_kms_helper
pc@pc-A15 ~ $
-
Lütfen çıktıları USB kablosuz ağ aygıtı takılıyken alınız, bu durumda sorunun ne olduğu hakkında bir fikrimiz oluşmuyor. Normalde RT2870 sürücüsü çekirdek ile gelir.
-
inxi -SNx
pc@pc-A15 ~ $ inxi -SNx
System: Host: pc-A15 Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: Cinnamon 2.8.6 (Gtk 3.10.8~8+qiana)
Distro: Linux Mint 17.3 Rosa
Network: Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k bus-ID: 02:00.0
Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
driver: atl1c v: 1.0.1.1-NAPI port: b000 bus-ID: 03:00.0
Card-3: Ralink usb-ID: 002-005
pc@pc-A15 ~ $
lspci -nnk | grep -iA2 net
pc@pc-A15 ~ $ lspci -nnk | grep -iA2 net
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: Pegatron Device [1b0a:208d]
Kernel drilsusb
pc@pc-A15 ~ $ lsusb
Bus 002 Device 005: ID 148f:7601 Ralink Technology, Corp.
Bus 002 Device 007: ID 0000:0538
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05c8:032a Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pc@pc-A15 ~ $
rfkill list
pc@pc-A15 ~ $ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
pc@pc-A15 ~ $ sudo lshw -C network
pc@pc-A15 ~ $ sudo lshw -C network
[sudo] password for pc:
*-network
açıklama: Kablosuz arayüz
ürün: AR9285 Wireless Network Adapter (PCI-Express)
üretici: Qualcomm Atheros
physical id: 0
bus info: pci@0000:02:00.0
mantıksal ad: wlan0
sürüm: 01
serial: 00:08:ca:23:9b:ef
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
yapılandırma: broadcast=yes driver=ath9k driverversion=3.19.0-32-generic firmware=N/A ip=192.168.1.105 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
kaynaklar: irq:17 bellek:f6a00000-f6a0ffff
*-network
açıklama: Eternet interface
ürün: AR8151 v2.0 Gigabit Ethernet
üretici: Qualcomm Atheros
physical id: 0
bus info: pci@0000:03:00.0
mantıksal ad: eth0
sürüm: c0
serial: e8:40:f2:08:9a:4f
boyut: 10Mbit/s
kapasite: 1Gbit/s
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress vpd bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
yapılandırma: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=10Mbit/s
kaynaklar: irq:28 bellek:f6000000-f603ffff ioport:b000(boyut=128)
pc@pc-A15 ~ $
iwconfig | grep Power
c@pc-A15 ~ $ iwconfig | grep Power
eth0 no wireless extensions.
lo no wireless extensions.
Bit Rate:81 Mb/s Tx-Power=15 dBm
Power Management:off
pc@pc-A15 ~ $
lsmod - farede sıkıntı var kopyalayamadım
c@pc-A15 ~ $ lsmod
Module Size Used by
nls_utf8 16384 0
udf 94208 0
crc_itu_t 16384 1 udf
ctr 16384 1
ccm 20480 1
rfcomm 69632 0
bnep 20480 2
bluetooth 491520 10 bnep,rfcomm
uvcvideo 90112 0
videobuf2_vmalloc 16384 1 uvcvideo
arc4 16384 2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_core 53248 1 uvcvideo
v4l2_common 16384 1 videobuf2_core
videodev 159744 3 uvcvideo,v4l2_common,videobuf2_core
media 24576 2 uvcvideo,videodev
dm_multipath 24576 0
intel_rapl 20480 0
iosf_mbi 16384 1 intel_rapl
x86_pkg_temp_thermal 16384 0
scsi_dh 16384 1 dm_multipath
intel_powerclamp 20480 0
coretemp 16384 0
crct10dif_pclmul 16384 0
ath9k 147456 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
cryptd 20480 1 ghash_clmulni_intel
ath9k_common 32768 1 ath9k
ath9k_hw 458752 2 ath9k_common,ath9k
binfmt_misc 20480 1
joydev 20480 0
snd_hda_codec_hdmi 53248 1
serio_raw 16384 0
ath 32768 3 ath9k_common,ath9k,ath9k_hw
snd_hda_codec_conexant 24576 1
snd_hda_codec_generic 69632 1 snd_hda_codec_conexant
mac80211 708608 1 ath9k
snd_hda_intel 36864 4 snd_hda_codec_hdmi
snd_hda_controller 32768 1 snd_hda_intel
snd_hda_codec 143360 5 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 20480 1 snd_hda_codec
cfg80211 524288 4 ath,ath9k_common,ath9k,mac80211
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
lpc_ich 24576 0
snd 86016 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 16384 2 snd,snd_hda_codec
shpchp 40960 0
mac_hid 16384 0
wmi 20480 0
mei_me 20480 0
mei 90112 1 mei_me
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,ppdev,parport_pc
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
dm_log 20480 2 dm_region_hash,dm_mirror
uas 24576 0
usb_storage 69632 1 uas
hid_generic
-
https://forum.linuxmint.net.tr/index.php?topic=3705.msg23624#msg23624
-
[member=8]Butterfly[/member] hocam laptopda çalıştı dediğiniz şey fakat benim masaüstü bilgisayarımda bunu denedim internet yok onda hata felan verdi onda biraz hiçbir türlü ona internet bağlayamıyorum yani internetim yok wifiden başka masaüstünede wifi bağlayamıyorum bunu laptopdan indirip masaüstüne atma şansımız varmı
-
Buradaki (https://launchpad.net/~thopiekar/+archive/ubuntu/mt7601/+files/mt7601-sta-dkms_3.0.0.4-0~201602170732~rev26~pkg4~ubuntu14.04.1_all.deb) paketi indirip sağ tık Gdebi ile kurmayı deneyebilrsiniz.
-
[member=8]Butterfly[/member] hocam dediğinizi indirdim diğer pcye aktardım install işte yükleme yaptım yükleme yaptıktan sonra taktım wifi usbyi çalışmadı yer felan değiştirdim kasanın arkasında taktım olmadı yazılan şeyleri tekrar yaptım gene taktığımda çalışmadı,?
Mesajlar Birleştirildi.
[member=8]Butterfly[/member] hocam pcyede reset attım yazmayı unutmuşum
-
[member=3312]JAGGAN[/member], sorun çözüldüyse konu başlığını etiketlemenizi rica edelim.
[okay]Çözülen başlıkların etiketlenmesi hakkında. (https://forum.linuxmint.net.tr/index.php?topic=2058.0)[/okay]
-
[member=8]Butterfly[/member] yok hocam sorun çözülmedi reset attım bide o üstteki dediklerimi yaptım olmadı yani reset attımda sorunu çözemediğim anlamında belirttim
-
Kurulum sırasında bir hata aldınız mı peki? Paketin kurumunu uçbirim yardımıyla yapmayı deneyiniz. Bunun için uçbirime "sudo dpkg -i" yazıp bir boşluk bıraktıktan sonra, indirdiğiniz paketi uçbirime sürükleyip bırakınız ve oluşan komutu çalıştırınız.
sudo dpkg -i /deb/paketini/sürükle/bırak
Sonra bu komutun çıktılarını foruma yapıştırarak paylaşınız.
-
hocam paket yüklerken hata vermedi dediğiniz şeyi yaptım fakat bilgisayarda internet komutları atamıyorum olmadı tekrar taktığımda
DPO_MT7601U_LinuxSTA_3.0.0.4_20130913.tar.bz2 - böyle bi klasor var içinde çeşitli dosyalar var internetten araştırdım bu dosyaları /etc/Wireless/ gibi yerlere atıyoruz da uğraştım yapamadım hocam belki biliyorsunuzdur yardım edermisiniz
Mesajlar Birleştirildi.
[member=8]Butterfly[/member] hocam bide ben linux minti kurarken internetsiz kurdum bununla bi ilgisi varmıdır
Mesajlar Birleştirildi.
[member=8]Butterfly[/member] Hocam içindeki dosyaları yazayım teker teker belki yardımcı olur
ate (klasör)
chips(klasör)
common(klasör)
include(klasör)
mac(klasör)
mcu(klasör)
mgmt(klasör)
os(klasör)
phy(klasör)
rate_ctrl(klasör)
sta(klaösr)
tools(klasör)
ipriv_usage(txt dosyası)
Makefile(Makefile dosyası)
README_STA_usb(bilinmeyen)
RT2870STA(dat dosyası)
RT2870STACard(dat dosyası)
sta_ate_iwpriv_usage(txt dosyası)hocam bi konu buldum reklam olmasın
https://forums.linuxmint.com/viewtopic.php?t=191243bide README_STA_usb nin içindeki kurulum dediği şey bu hocam ingilizcem pek yok anlatabilirmisiniz böyle anlatmışta pek yapamadım
Build Instructions:
====================
1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
6> load driver, go to "os/linux/" directory.
#[kernel 2.4]
# $/sbin/insmod rt2870sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2870sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta
=======================================================================
Mesajlar Birleştirildi.
[member=8]Butterfly[/member] hocam README_STA_usb nin içindekileri tamamını buldum internetten kusra bkamayın flood yaptım
* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*
=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver
=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko
=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.
=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.
=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.
=======================================================================
Contents:
=============
Makefile : Makefile
*.c : c files
*.h : header files
=======================================================================
Features:
==========
This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
open or shared or WPA-PSK or WPA2-PSK authentication method.
NONE, WEP, TKIP and AES encryption.
=======================================================================
Build Instructions:
====================
1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
6> load driver, go to "os/linux/" directory.
#[kernel 2.4]
# $/sbin/insmod rt2870sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2870sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta
=======================================================================
CONFIGURATION:
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file
i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0
-----------------------------------------------
*NOTE:
WMM parameters
WmmCapable Set it as 1 to turn on WMM Qos support
AckPolicy1~4 Ack policy which support normal Ack or no Ack
(AC_BK, AC_BE, AC_VI, AC_VO)
All WMM parameters do not support iwpriv command but ¡¥WmmCapable¡¦¡¦,
please store all parameter to RT2870STA.dat, and restart driver.
-----------------------------------------------
syntax is 'Param'='Value' and describes below.
@> CountryRegion=value
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
@> CountryRegionABand=value
value
0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
4: use 149, 153, 157, 161, 165 Channel
5: use 149, 153, 157, 161 Channel
6: use 36, 40, 44, 48 Channel
7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
8: use 52, 56, 60, 64 Channel
9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel
@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
@> SSID=value
value
0~z, 1~32 ascii characters.
@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
@> Channel=value
value
depends on CountryRegion or CountryRegionABand
@> BGProtection=value
value
0: Auto
1: Always on
2: Always off
@> TxPreamble=value
value
0:Preamble Long
1:Preamble Short
2:Auto
@> RTSThreshold=value
value
1~2347
@> FragThreshold=value
value
256~2346
@> TxBurst=value
value
0: Disable
1: Enable
@> NetworkType=value
value
Infra: infrastructure mode
Adhoc: adhoc mode
@> AuthMode=value
value
OPEN For open system
SHARED For shared key system
WEPAUTO Auto switch between OPEN and SHARED
WPAPSK For WPA pre-shared key (Infra)
WPA2PSK For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key (Adhoc)
WPA Use WPA-Supplicant
WPA2 Use WPA-Supplicant
@> EncrypType=value
value
NONE For AuthMode=OPEN
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK
AES For AuthMode=WPAPSK or WPA2PSK
@> DefaultKeyID=value
value
1~4
@> Key1=value
Key2=value
Key3=value
Key4=value
value
10 or 26 hexadecimal characters eg: 012345678
5 or 13 ascii characters eg: passd
(usage : "iwpriv" only)
@> Key1Type=vaule
Key2Type=value
Key3Type=vaule
Key4Type=vaule
value
0 hexadecimal type
1 assic type
(usage : reading profile only)
@> Key1Str=value
Key2Str=value
Key3Str=vaule
Key4Str=vaule
value
10 or 26 characters (key type=0)
5 or 13 characters (key type=1)
(usage : reading profile only)
@> WPAPSK=value
value
8~63 ASCII or
64 HEX characters
@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM
@> PSMode=value
value
CAM Constantly Awake Mode
Max_PSP Max Power Savings
Fast_PSP Power Save Mode
@> FastRoaming=value
value
0 Disabled
1 Enabled
@> RoamThreshold=value
value
Positive Interger(dBm)
@> HT_RDG=value
value
0 Disabled
1 Enabled
@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above
@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format
@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 £gs
2: 1/2 £gs
3: 1 £gs
4: 2 £gs
5: 4 £gs
6: 8 £gs
7: 16 £gs
@> HT_BW=value
value
0 20MHz
1 40MHz
@> HT_AutoBA=value
value
0 Disabled
1 Enabled
@> HT_BADecline
value
0 Disabled
1 Enabled <Reject BA request from AP>
@> HT_AMSDU=value
value
0 Disabled
1 Enabled
@> HT_BAWinSize=value
value
1 ~ 64
@> HT_GI=value
value
0 long GI
1 short GI
@> HT_MCS=value
value
0 ~ 15
33: auto
@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)
0 Static SM Power Save Mode
1 Dynamic SM Power Save Mode
2 Reserved
3 SM enabled
(not fully support yet)
@> EthConvertMode=value
value
dongle
clone
hybrid
@> EthCloneMac=value
value
xx:xx:xx:xx:xx:xx
@> IEEE80211H=value
value
0 Disabled
1 Enabled
@> TGnWifiTest=value
value
0 Disabled
1 Enabled
@> WirelessEvent=value
value
0 Disabled
1 Enabled <send custom wireless event>
@> MeshId=value
value
Length 1~32 ascii characters
@> MeshAutoLink=value
value
0 Disabled
1 Enabled
@> MeshAuthMode=value
value
OPEN For open system
WPANONE For WPA pre-shared key (Adhoc)
@> MeshEncrypType=value
value
NONE For MeshAuthMode=OPEN
WEP For MeshAuthMode=OPEN
TKIP For MeshAuthMode=WPANONE
AES For MeshAuthMode=WPANONE
@> MeshWPAKEY=value
value
8~63 ASCII or
64 HEX characters
@> MeshDefaultkey=value
value
1~4
@> MeshWEPKEY=value
value
10 or 26 characters
5 or 13 characters
@> CarrierDetect=value
value
0 Disabled
1 Enabled
MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,
edit( or add the line) in /etc/modules.conf:
alias ra0 rt2870sta
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0
DEVICE='ra0'
ONBOOT='yes'
NOTE:
if you use dhcp, add this line too .
BOOTPROTO='dhcp'
*D) To ease the Default Gateway setting,
add the line
GATEWAY=x.x.x.x
in /etc/sysconfig/network
=======================================================================
Dongle/Clone Features:
======================
A) Dongle mode:
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
can transparently connect to the AP.
B) Clone mode:
Provides a 1-to-1 MAC address mapping mechanism.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
use source MAC of first packet coming from wired device as SA MAC.
NOTE: In this mode, only the PC who own the specified MAC can connect to the AP.
C) Hybrid mode(Dongle+Clone):
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
can transparently connect to the AP.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
use source MAC of first packet coming from wired device as
-
Öncelikle aşağıdaki komutun çıktısına bakalım, çıktıları USB bellek vb. bir ortam yardımıyla diğer PC'den aktarabilirsiniz.
modinfo mt7601Usta
Bu PC'ye Linux Mint 18 kurmak da denenebilir, çekirdeğin güncel sürümlernde bu aygıt için destek geldiğini hatırlıyor gibiyim.
-
linux mint 18 kurunca direk algıladı teşekkürler [member=8]Butterfly[/member] - web tarayıcılarında bi konu açıcam ilgilenirmisin
-
Rica ederiz, konuyu etiketlerseiz kilitleyebiliriz.
[okay]Çözülen başlıkların etiketlenmesi hakkında. (https://forum.linuxmint.net.tr/index.php?topic=2058.0)[/okay]