Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: eish123 - 17 Eylül 2016, 16:53:58
-
arkadaşlar bugün linux mint 18 cinnamon 64 bit sürümünü kurdum. üstteki konudan bakarak bumblebee kurmaya çalıştım fakat kurulumdan sonra optirun glxgears komutunu verdiğimde hata alıyorum. yardımcı olur musunuz. kurulum konusunda bahsedilen çıktıları ve hatayı aşağıya ekliyorum.
hata
ahmet@lenovo ~ $ optirun glxgears
[ 1137.116188] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 1137.116231] [ERROR]Aborting because fallback start is disabled.
çıktılar
ahmet@lenovo ~ $ optirun -vvv glxgears
[ 1210.451800] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1210.452644] [DEBUG]optirun version 3.2.1 starting...
[ 1210.452664] [DEBUG]Active configuration:
[ 1210.452676] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1210.452693] [DEBUG] X display: :8
[ 1210.452721] [DEBUG] LD_LIBRARY_PATH:
[ 1210.452731] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1210.452747] [DEBUG] Accel/display bridge: auto
[ 1210.452755] [DEBUG] VGL Compression: proxy
[ 1210.452765] [DEBUG] VGLrun extra options:
[ 1210.452777] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1210.452840] [DEBUG]Using auto-detected bridge virtualgl
[ 1210.453466] [INFO]Response: No - error: Could not load GPU driver
[ 1210.453522] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 1210.453545] [DEBUG]Socket closed.
[ 1210.453607] [ERROR]Aborting because fallback start is disabled.
[ 1210.453627] [DEBUG]Killing all remaining processes.
ahmet@lenovo ~ $ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-367
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-367:/usr/lib32/nvidia-367
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-367/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
ahmet@lenovo ~ $ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:07:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
ahmet@lenovo ~ $ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok
ahmet@lenovo ~ $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii bumblebee 3.2.1-96~xenialppa1 amd64 NVIDIA Optimus support for Linux
ii bumblebee-nvidia 3.2.1-96~xenialppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-367 367.44-0ubuntu0~gpu16.04.1 amd64 NVIDIA binary driver - version 367.44
ii nvidia-settings 370.28-0ubuntu0~gpu16.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20150328-3~xenialppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20150328-3~xenialppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20150328-3~xenialppa1 i386 Shared libraries for primus
ii primus-libs-ia32:i386 20150328-3~xenialppa1 i386 Shared libraries for primus (32-bit)
ii virtualgl 2.4.1-1~xenialppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.4.1-1~xenialppa1 amd64 Library files for virtualgl
ahmet@lenovo ~ $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
07:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
-
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
Buradaki (https://forum.linuxmint.net.tr/index.php?topic=6258.0#post_conf) anlatımda belirtildiği üzere Driver= satırını Driver=nvidia olarak değiştirmeyi deneyiniz.
-
dediğinizi yapınca sorun düzeldi. kuruluma bir kaç defa bakmama rağmen o kısmı nasıl olduysa gözden kaçırmışım. yardımınız için teşekkür ederim.
-
Rica ederiz.
Konu başlığını düzenleyip etiketlerseniz, konuyu kilitleyebiliriz.
[okay]Çözülen başlıkların etiketlenmesi hakkında (https://forum.linuxmint.net.tr/index.php?topic=2058.0)[/okay]