Linux Mint Türkiye
Linux Mint Destek => Ekran Kartları => Donanım => Nvidia => Konuyu başlatan: ysfbkrcn - 13 Haziran 2017, 17:54:19
-
Merhaba,
Ekran kartımla alakalı sorun yaşıyorum.
Driver Manager'den "xserver-xorg-video-nouveau (open-source)" seçtiğim zaman şöyle bir uyarı alıyorum.
Running in software rendering mode
Cinnamon is currently running without video hardware acceleration and, as a result, you may observe much higher than normal CPU usage.
There could be a problem with your drivers or some other issue. For the best experience, it is recommended that you only use this mode for troubleshooting purposes.
Farklı bir ekran kartı sürücüsü seçersem, nvidia-381 ya da nvia-371 de cinnamon çalışmayı durduruyor. Forumdaki ve internetteki önerilen çözümleri denedim ama bir çözüme ulaşamadım.
yusuf@y560 ~ $ inxi -SGx
System: Host: y560 Kernel: 4.4.0-21-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: Cinnamon 3.2.7 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.1 Serena
Graphics: Card-1: Intel Device 5916 bus-ID: 00:02.0
Card-2: NVIDIA Device 179c bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: fbdev,intel (unloaded: vesa) Resolution: 1366x768@76.00hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
yusuf@y560 ~ $ glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
GL_OES_fbo_render_mipmap, GL_OES_get_program_binary, GL_OES_mapbuffer,
yusuf@y560 ~ $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
01:00.0 3D controller: NVIDIA Corporation Device 179c (rev a2)
yusuf@y560 ~ $ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1366 x 768, current 1366 x 768, maximum 1366 x 768
default connected primary 1366x768+0+0 0mm x 0mm
1366x768 76.00*
yusuf@y560 ~ $ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.102 (buildmeister@swio-display-x64-rhel04-19) Mon Jan 16 13:23:00 PST 2017
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
yusuf@y560 ~ $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl|fglrx'
rc nvidia-304 304.135-0ubuntu0.16.04.1 amd64 NVIDIA legacy binary driver - version 304.135
rc nvidia-340 340.102-0ubuntu0.16.04.2 amd64 NVIDIA binary driver - version 340.102
rc nvidia-381 381.22-0ubuntu0~gpu16.04.2 amd64 NVIDIA binary driver - version 381.22
rc nvidia-opencl-icd-381 381.22-0ubuntu0~gpu16.04.2 amd64 NVIDIA OpenCL ICD
ii nvidia-prime 0.8.2linuxmint1 amd64 Tools to enable NVIDIA's Prime
ii nvidia-settings 381.22-0ubuntu0~gpu16.04.1 amd64 Tool for configuring the NVIDIA graphics driver
-
[warning]Ekran Kartı ile İlgili Sorularda Verilmesi Gereken Çıktılar (https://forum.linuxmint.net.tr/index.php?topic=2738.0)[/warning]
-
ilk mesajı güncelledim.
-
Aşağıdaki komutu uçbirimde çalıştırıp sisteminizi yeniden başlatınız, Intel + Nvidia hibrit GPU olan sistemlerde nvidia-xconfig ile xorg.conf yapılandırma dosyası oluşturmamalısınız.
sudo rm -f /etc/X11/xorg.conf
-
Aşağıdaki komutu uçbirimde çalıştırıp sisteminizi yeniden başlatınız, Intel + Nvidia hibrit GPU olan sistemlerde nvidia-xconfig ile xorg.conf yapılandırma dosyası oluşturmamalısınız.
sudo rm -f /etc/X11/xorg.conf
hala aynı uyarıyı almaktayım.
bu arada X11 dizininden silmem gereken başka bir şeyler olabilir mi?
yusuf@y560 /etc/X11 $ ls
app-defaults fonts xinit xorg.conf.backup Xreset Xresources Xsession.d xsm
default-display-manager rgb.txt xkb xorg.conf.nvidia-xconfig-original Xreset.d Xsession Xsession.options Xwrapper.config
Mesajlar Birleştirildi.
sistem bilgilerimi ekliyorum. forumdaki diğer konularını inceledim ve anladığım kadarıyla sorun "yazılımsal işleme etkin" olmasından kaynaklı. fakat çözümler amd kartlar için sunulmuş. nvidia kartları için hangi komutları çalıştırmam gerektiğini bilmiyorum.
System: Host: y560 Kernel: 4.4.0-21-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: Cinnamon 3.2.7 (Gtk 3.18.9-1ubuntu3.3) dm: mdm Distro: Linux Mint 18.1 Serena
Machine: Mobo: Acer model: Captain_SK v: V1.25 Bios: Insyde v: V1.25 date: 03/03/2017
CPU: Dual core Intel Core i5-7200U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10849
clock speeds: min/max: 400/2601 MHz 1: 1900 MHz 2: 1400 MHz 3: 1500 MHz 4: 1400 MHz
Graphics: Card-1: Intel Device 5916 bus-ID: 00:02.0 chip-ID: 8086:5916
Card-2: NVIDIA Device 179c bus-ID: 01:00.0 chip-ID: 10de:179c
Display Server: X.Org 1.18.4 drivers: fbdev,intel (unloaded: vesa)
Resolution: 1366x768@76.00hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card Intel Device 9d71 driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:9d71
Sound: Advanced Linux Sound Architecture v: k4.4.0-21-generic
Network: Card-1: Qualcomm Atheros Device 0042 driver: ath10k_pci bus-ID: 03:00.0 chip-ID: 168c:0042
IF: wlp3s0 state: up speed: N/A duplex: N/A mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 3000 bus-ID: 04:00.1 chip-ID: 10ec:8168
IF: enp4s0f1 state: down mac: <filter>
Drives: HDD Total Size: 750.2GB (25.1% used)
ID-1: /dev/sda model: ST9500420AS size: 500.1GB serial: 5VJ97ZP8
ID-2: /dev/sdb model: Samsung_SSD_850 size: 250.1GB serial: S21PNSAG734432H
Partition: ID-1: / size: 226G used: 172G (81%) fs: ext4 dev: /dev/sdb5
ID-2: swap-1 size: 4.09GB used: 0.00GB (0%) fs: swap dev: /dev/sdb1
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 56.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Repos: Active apt sources in file: /etc/apt/sources.list.d/docker.list
deb [arch=amd64] https: //apt.dockerproject.org/repo debian-stretch main
Active apt sources in file: /etc/apt/sources.list.d/erlang-solutions.list
deb http: //binaries.erlang-solutions.com/debian squeeze contrib
Active apt sources in file: /etc/apt/sources.list.d/flexiondotorg-youtube-dl-gui-xenial.list
deb http: //ppa.launchpad.net/flexiondotorg/youtube-dl-gui/ubuntu xenial main
deb-src http: //ppa.launchpad.net/flexiondotorg/youtube-dl-gui/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/github_git-lfs.list
deb https: //packagecloud.io/github/git-lfs/linuxmint/ sarah main
deb-src https: //packagecloud.io/github/git-lfs/linuxmint/ sarah main
Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
Active apt sources in file: /etc/apt/sources.list.d/graphics-drivers-ppa-xenial.list
deb http: //ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial main
deb-src http: //ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/mongodb-org-3.2.list
deb http: //repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.2 multiverse
Active apt sources in file: /etc/apt/sources.list.d/nemh-systemback-xenial.list
deb http: //ppa.launchpad.net/nemh/systemback/ubuntu xenial main
deb-src http: //ppa.launchpad.net/nemh/systemback/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/numix-ppa-xenial.list
deb http: //ppa.launchpad.net/numix/ppa/ubuntu xenial main
deb-src http: //ppa.launchpad.net/numix/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/official-package-repositories.list
deb http: //packages.linuxmint.com serena main upstream import backport #id:linuxmint_main
deb http: //archive.ubuntu.com/ubuntu xenial main restricted universe multiverse
deb http: //archive.ubuntu.com/ubuntu xenial-updates main restricted universe multiverse
deb http: //archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
deb http: //security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
deb http: //archive.canonical.com/ubuntu/ xenial partner
Active apt sources in file: /etc/apt/sources.list.d/qbittorrent-team-qbittorrent-stable-xenial.list
deb http: //ppa.launchpad.net/qbittorrent-team/qbittorrent-stable/ubuntu xenial main
deb-src http: //ppa.launchpad.net/qbittorrent-team/qbittorrent-stable/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/ravefinity-project-ppa-xenial.list
deb http: //ppa.launchpad.net/ravefinity-project/ppa/ubuntu xenial main
deb-src http: //ppa.launchpad.net/ravefinity-project/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/spotify.list
deb http: //repository.spotify.com stable non-free
Active apt sources in file: /etc/apt/sources.list.d/team-xbmc-ppa-xenial.list
deb http: //ppa.launchpad.net/team-xbmc/ppa/ubuntu xenial main
deb-src http: //ppa.launchpad.net/team-xbmc/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/webupd8team-java-xenial.list
deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/zanchey-asciinema-xenial.list
deb http: //ppa.launchpad.net/zanchey/asciinema/ubuntu xenial main
deb-src http: //ppa.launchpad.net/zanchey/asciinema/ubuntu xenial main
Info: Processes: 254 Uptime: 4 min Memory: 2134.8/7851.8MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Unknown python2.7 client inxi: 2.2.35
-
Başaka silmeniz gereken bir dosya yok, aşağıdaki komutla Nvidia ile ilgili sürücüleri kaldırıp sistemi yeniden başlatmayı deneyiniz.
sudo apt-get purge nvidia*sudo apt-get purge bbswith-dkms
-
son komutun çıktısı şu şekilde. şimdi yeniden başlatıyorum.
yusuf@y560 ~ $ sudo apt-get purge bbswith-dkms
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bbswith-dkms
Mesajlar Birleştirildi.
aynı uyarıyı almaya devam ediyorum.
-
Sistemi yeniden başlatmadıysanız, önce yeniden başlatın ve ekran kartı ile ilgili ilgili çıktıları yeniden başlatın. Sorunun çözümü zor değil, şu an sistem yazılımsal işleme kipi ile destek sunan sürücüyle (llvmpipe) çalıştığı için bu hatayı alıyorsunuz. Önce çıktıları görelim, sonra yönlendirme yapalım.
-
yusuf@y560 ~ $ inxi -SGx
System: Host: y560 Kernel: 4.4.0-21-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: Cinnamon 3.2.7 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.1 Serena
Graphics: Card-1: Intel Device 5916 bus-ID: 00:02.0
Card-2: NVIDIA Device 179c bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: fbdev,intel (unloaded: vesa) Resolution: 1366x768@76.00hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
yusuf@y560 ~ $ glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
GL_OES_fbo_render_mipmap, GL_OES_get_program_binary, GL_OES_mapbuffer,
yusuf@y560 ~ $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
01:00.0 3D controller: NVIDIA Corporation Device 179c (rev a2)
yusuf@y560 ~ $ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1366 x 768, current 1366 x 768, maximum 1366 x 768
default connected primary 1366x768+0+0 0mm x 0mm
1366x768 76.00*
yusuf@y560 ~ $ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
alttaki komut herhangi bir sonuç döndürmedi.
yusuf@y560 ~ $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl|fglrx'
-
Aşağıdaki komutu uçbirimde çalıştırıp sistemi yeniden başlatmayı deneyiniz.
sudo mkdir -p /etc/X11/xorg.conf.d/ && echo -e 'Section "Device"\n Identifier "Intel Graphics"\n Driver "Intel"\n Option "AccelMethod" "sna"\n Option "TearFree" "true"\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf
-
Aşağıdaki komutu uçbirimde çalıştırıp sistemi yeniden başlatmayı deneyiniz.
sudo mkdir -p /etc/X11/xorg.conf.d/ && echo -e 'Section "Device"\n Identifier "Intel Graphics"\n Driver "Intel"\n Option "AccelMethod" "sna"\n Option "TearFree" "true"\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf
aynı uyarıyı almaya devam ediyorum.
-
Aşağıdaki komutu uçbirimde çalıştırınız,
cinnamon --replace 2> cinnamon
bu komut kullanıcı ev dizini içinde cinnamon isminde bir dosya oluşturacak.
Bu dosyayı açıp, içeriğini kod etiketi içinde foruma yapıştırınız.
-
Window manager warning: Software rendering detected: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
Cjs-Message: JS LOG: About to start Cinnamon
Cjs-Message: JS LOG: ACTIVATING SOFTWARE RENDERING
St-Message: cogl npot texture sizes SUPPORTED
Cjs-Message: JS LOG: Cinnamon started at Tue Jun 13 2017 22:19:24 GMT+0300
Window manager warning: Log level 16: Attempting to read the recently used resources file at '/home/yusuf/.local/share/recently-used.xbel', but the parser failed: Failed to open file '/home/yusuf/.local/share/recently-used.xbel': Permission denied.
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
openGL version 3.3 detected (GL3 Cogl Driver)
MetaSyncRing disabled: couldn't find required GL extensions, or the minimum safe openGL version was not met
Window manager warning: Log level 16: STACK_OP_REMOVE: window 0x40 not in stack
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 13
Cjs-Message: JS LOG: Invalid network device type, is 14
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
Cjs-Message: JS LOG: network applet: Found connection for active
-
Buradaki (https://forum.linuxmint.net.tr/index.php?topic=6729.msg42783#msg42783) öneriyi dener misiniz?
-
bunu daha önceden zaten denemiştim ve tekrar denedim. şu anda mate arayüzünden yazıyorum ama "direct rendering" devam ediyor.
pencereler arasında geçiş yaparken ekran yenileme hızı çok düşük. yukarıdan aşağıya doğru parça parça görüntü geliyor. cinnamon'da da bu şekildeydi.
-
Aşağıdaki komutu uçbirimde çalıştırıp sistemi yeniden başlatmayı deneyiniz.
sudo dpkg-reconfigure xserver-xorg
Sorun çözülmezse ekran kartı ile ilgili çıktıları yeniden paylaşınız.
-
sorun devam ediyor.
aşağıdaki komutun çıktısında Intel ile alakalı hata var.
yusuf@y560 ~ $ inxi -SGx
System: Host: y560 Kernel: 4.4.0-21-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: Cinnamon 3.2.7 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.1 Serena
Graphics: Card-1: Intel Device 5916 bus-ID: 00:02.0
Card-2: NVIDIA Device 179c bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: fbdev (unloaded: vesa) FAILED: intel
Resolution: 1366x768@76.00hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
yusuf@y560 ~ $ glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
GL_OES_fbo_render_mipmap, GL_OES_get_program_binary, GL_OES_mapbuffer,
yusuf@y560 ~ $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
01:00.0 3D controller: NVIDIA Corporation Device 179c (rev a2)
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1366 x 768, current 1366 x 768, maximum 1366 x 768
default connected primary 1366x768+0+0 0mm x 0mm
1366x768 76.00*
yusuf@y560 ~ $ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
aşağıdaki komut yine sonuç döndürmedi.
yusuf@y560 ~ $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl|fglrx'
-
Komutun çıktısına bakalım.
cat /etc/X11/xorg.conf.d/20-intel.conf
-
yusuf@y560 /etc/X11/xorg.conf.d $ cat /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "Intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
EndSection
-
Sisteminizi aşağıdaki şekilde güncellemeyi dener misiniz?
Güncelleme Yöneticisi => Düzenle menüsü => Tercihler => Seviyeler kısmından 4. seviye güncellemeleri işaretleyiniz ve Yenile düğmesine tıklayıp Güncellemeleri Kur düğmesine tıklayarak sisteminizi güncelleyiniz. Sonrasında isterseniz 4. seviye güncellemeleri pasifleştirebilirsiniz.
Ardından, Güncelleme Yöneticisi => Görünüm menüsü => "Linux çekirdekleri" aracı yardımıyla 4.10.x serisi çekirdeğin son sürümünü kurunuz.
Güncellemeler sonrasında sistemi yeniden başlatınız.
-
Sisteminizi aşağıdaki şekilde güncellemeyi dener misiniz?
Güncelleme Yöneticisi => Düzenle menüsü => Tercihler => Seviyeler kısmından 4. seviye güncellemeleri işaretleyiniz ve Yenile düğmesine tıklayıp Güncellemeleri Kur düğmesine tıklayarak sisteminizi güncelleyiniz. Sonrasında isterseniz 4. seviye güncellemeleri pasifleştirebilirsiniz.
Ardından, Güncelleme Yöneticisi => Görünüm menüsü => "Linux çekirdekleri" aracı yardımıyla 4.10.x serisi çekirdeğin son sürümünü kurunuz.
Güncellemeler sonrasında sistemi yeniden başlatınız.
teşekkürler, bu işlemler sonrası her şey yolunda gözüküyor. doğrulamak için çalıştırmamız gereken komutlar var mı?
-
Aşağıdaki komutların çıktısında llvmpipe yerine intel yazıyorsa sorun çözülmüş demektir.
inxi -Gx
glxinfo | grep render
Bu durumda konu başlığını etiketlerseniz, konuyu kilitleyebiliriz.
[okay] Çözülen başlıkların etiketlenmesi hakkında (https://forum.linuxmint.net.tr/index.php?topic=2058.0)[/okay]
-
şu anda sistem intel ekran kartı ile mi çalışıyor demek bu? eğer öyleyse daha yüksek GPU gücü gerektiren bir işlem yapmak istersem Nvidia ekran kartını kullanmam için bir yol var mı?
yusuf@y560 ~ $ inxi -Gx
Graphics: Card-1: Intel Device 5916 bus-ID: 00:02.0
Card-2: NVIDIA Device 179c bus-ID: 01:00.0
Display Server: X.Org 1.18.4 driver: intel Resolution: 1366x768@60.00hz
GLX Renderer: Mesa DRI Intel Kabylake GT2 GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
yusuf@y560 ~ $ glxinfo | grep render
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) Kabylake GT2
GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
GL_MESA_texture_signed_rgba, GL_NV_conditional_render, GL_NV_depth_clamp,
GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_light_max_exponent,
GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,
-
Şu an intel GPU kullanılmaya başlanmış ve donanımsal 3D hızlandırma etkin.
Nvidia GPU kullanımı için aşağıdaki bağlantıyı inceleyebilirsiniz.
[info][Nasıl] Linux Mint 18 - Intel + Nvidia Hibrit GPU İçin Bumblebee Kurulumu (https://forum.linuxmint.net.tr/index.php?topic=6258.0)[/info]
Sorun çözüldüğüne göre konu başlığını etiketlemenizi rica edelim.