Linux Mint Türkiye
Linux Mint Destek => Ağ / Internet / Network => Konuyu başlatan: odamiolur - 15 Ekim 2018, 11:59:50
-
İyi günler. Linux Mint XFCE kullanıyorum. Kablosuz bağlantıda yavaşlama ve kopma oluyor. İnternete bağlı görünsem dahi sayfalar yüklenmiyor. Forumda birçok konuyu inceleyip uygulamama rağmen çözemedim.
Yardımlarınızı bekliyorum.
inxi -SMNnxxz
System: Host: odeppo Kernel: 4.15.0-20-generic i686 bits: 32 gcc: 7.3.0
Desktop: Xfce 4.12.3 (Gtk 2.24.31) dm: lightdm
Distro: Linux Mint 19 Tara
Machine: Device: laptop System: ASUSTeK product: 1000H v: x.x serial: N/A
Mobo: ASUSTeK model: 1000H v: x.xx serial: N/A
BIOS: American Megatrends v: 1902 date: 03/25/2009
Chassis: ASUSTek type: 10 v: x.x serial: N/A
Network: Card-1: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
driver: ath5k bus-ID: 01:00.0 chip-ID: 168c:001c
IF: wlp1s0 state: up mac: <filter>
Card-2: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
driver: ATL1E port: ec00 bus-ID: 03:00.0 chip-ID: 1969:1026
IF: enp3s0 state: down mac: <filter>
lspci -nnk | grep -iA2 net
01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: AzureWave AW-GE780 802.11bg Wireless Mini PCIe Card [1a3b:1026]
Kernel driver in use: ath5k
--
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1043:8324]
Kernel driver in use: ATL1E
Kernel modules: atl1e
lsusb
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 007: ID 05ac:12a8 Apple, Inc. iPhone5/5C/5S/6
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
rfkill list
0: eeepc-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
5: phy4: Wireless LAN
Soft blocked: no
Hard blocked: no
sudo lshw -C network
[sudo] password for odeppo:
*-network
açıklama: Eternet interface
ürün: AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
üretici: Qualcomm Atheros
physical id: 0
bus info: pci@0000:03:00.0
mantıksal ad: enp3s0
sürüm: b0
serial: 00:26:18:21:86:d2
kapasite: 100Mbit/s
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress vpd bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
yapılandırma: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no multicast=yes port=twisted pair
kaynaklar: irq:17 bellek:fbfc0000-fbffffff ioport:ec00(boyut=128)
*-network
açıklama: Kablosuz arayüz
ürün: AR242x / AR542x Wireless Network Adapter (PCI-Express)
üretici: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
mantıksal ad: wlp1s0
sürüm: 01
serial: 00:25:d3:0c:52:6d
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress msix bus_master cap_list eternet physical wireless
yapılandırma: broadcast=yes driver=ath5k driverversion=4.15.0-20-generic firmware=N/A ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
kaynaklar: irq:19 bellek:f8000000-f800ffff
iwconfig | grep Power
lo no wireless extensions.
enp3s0 no wireless extensions.
Bit Rate=1 Mb/s Tx-Power=20 dBm
Power Management:off
lsmod
Module Size Used by
ipheth 16384 0
ufs 73728 0
qnx4 16384 0
hfsplus 94208 0
hfs 53248 0
minix 32768 0
ntfs 98304 0
msdos 20480 0
jfs 176128 0
xfs 1069056 0
libcrc32c 16384 1 xfs
ath5k 135168 0
ath 24576 1 ath5k
rtl8723be 94208 0
btcoexist 126976 1 rtl8723be
rtl8723_common 24576 1 rtl8723be
rtl_pci 32768 1 rtl8723be
rtlwifi 73728 4 rtl_pci,btcoexist,rtl8723_common,rtl8723be
ccm 20480 3
uvcvideo 81920 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
arc4 16384 2
videobuf2_v4l2 20480 1 uvcvideo
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videodev 155648 3 uvcvideo,videobuf2_core,videobuf2_v4l2
snd_hda_codec_realtek 90112 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
media 32768 2 uvcvideo,videodev
snd_hda_intel 36864 3
coretemp 16384 0
snd_hda_codec 106496 3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 65536 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 86016 3 snd_hda_intel,snd_hda_codec,snd_hda_core
joydev 20480 0
input_leds 16384 0
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
serio_raw 16384 0
snd_rawmidi 28672 1 snd_seq_midi
snd_seq 57344 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
lpc_ich 24576 0
snd_timer 28672 2 snd_seq,snd_pcm
mac80211 675840 4 rtl_pci,rtlwifi,ath5k,rtl8723be
snd 65536 16 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
cfg80211 532480 4 mac80211,ath,rtlwifi,ath5k
shpchp 32768 0
soundcore 16384 1 snd
eeepc_laptop 20480 0
sparse_keymap 16384 1 eeepc_laptop
mac_hid 16384 0
sch_fq_codel 20480 6
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,parport_pc,ppdev
ip_tables 20480 0
x_tables 28672 1 ip_tables
autofs4 40960 2
btrfs 1081344 0
xor 28672 1 btrfs
zstd_compress 151552 1 btrfs
raid6_pq 106496 1 btrfs
dm_mirror 24576 0
dm_region_hash 20480 1 dm_mirror
dm_log 20480 2 dm_mirror,dm_region_hash
i915 1282048 9
i2c_algo_bit 16384 1 i915
drm_kms_helper 151552 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
psmouse 131072 0
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
pata_acpi 16384 0
atl1e 36864 0
drm 339968 11 i915,drm_kms_helper
video 40960 2 eeepc_laptop,i915
Düzeneleme: Konu başlığı
-
Forumda birçok konuyu inceleyip uygulamama rağmen çözemedim.
İnceleyip uyguladığınız konular hakkında bilgi vermeniz gerekiyor. Sizin neleri uyguladığınızı bilmeden öneri sunmak uygun olmayacaktır.
[warning]Konu Açarken Dikkat Edilmesi Gerekenler (https://forum.linuxmint.net.tr/index.php?topic=3067.0)[/warning]
-
İnceleyip uyguladığınız konular hakkında bilgi vermeniz gerekiyor. Sizin neleri uyguladığınızı bilmeden öneri sunmak uygun olmayacaktır.
[warning]Konu Açarken Dikkat Edilmesi Gerekenler (https://forum.linuxmint.net.tr/index.php?topic=3067.0)[/warning]
Denenen çözümler aşağıdadır.
Ek bilgi olarak sistem ilk açıldığında internet sorunsuz çalışıyor. Chromium kullanıyorum, ilk tıkladığım link açılıyor. İkinci link yüklenmiyor. Web sitesi fark etmeksizin durum bu şekilde.
- https://forum.linuxmint.net.tr/index.php?topic=8465.msg52165#msg52165
- https://forum.linuxmint.net.tr/index.php?topic=9154.0
- https://forum.linuxmint.net.tr/index.php?topic=9195.msg56206#msg56206
- https://forum.linuxmint.net.tr/index.php?topic=8096.msg49821#msg49821
1.Link uygulaması sonucu istenilen çıktılar;
modinfo rtl8723be
filename: /lib/modules/4.15.0-36-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rtl8723be.ko
firmware: rtlwifi/rtl8723befw_36.bin
firmware: rtlwifi/rtl8723befw.bin
description: Realtek 8723BE 802.11n PCI wireless
license: GPL
author: Realtek WlanFAE <wlanfae@realtek.com>
author: PageHe <page_he@realsil.com.cn>
srcversion: 4460AA5584590927164B1F2
alias: pci:v000010ECd0000B723sv*sd*bc*sc*i*
depends: rtlwifi,rtl8723-common,rtl_pci,btcoexist,mac80211
retpoline: Y
intree: Y
name: rtl8723be
vermagic: 4.15.0-36-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: swenc:Set to 1 for software crypto (default 0)
(bool)
parm: ips:Set to 0 to not use link power save (default 1)
(bool)
parm: swlps:Set to 1 to use SW control power save (default 0)
(bool)
parm: fwlps:Set to 1 to use FW control power save (default 1)
(bool)
parm: msi:Set to 1 to use MSI interrupts mode (default 0)
(bool)
parm: aspm:Set to 1 to enable ASPM (default 1)
(int)
parm: debug_level:Set debug level (0-5) (default 0) (int)
parm: debug_mask:Set debug mask (default 0) (ullong)
parm: disable_watchdog:Set to 1 to disable the watchdog (default 0)
(bool)
parm: ant_sel:Set to 1 or 2 to force antenna number (default 0)
(int)
dkms status
rtlwifi-new, 0.6, 4.15.0-20-generic, i686: installed (original_module exists)
2.Link uygulaması sonucu istenilen çıktılar;
uname -r
4.15.0-36-generic
3.Link denendi, çıktı istenilmemiş.
4.Link denendi, çıktı istenilmemiş.
-
Sizin paylaştığınız çıktılarda RTL8723BE ile ilgili bir donanım görünmüyor. Sistemdeki tek kablosuz ağ cihazı aşağıdaki. Neden farklı bir aygıtla ilgili çözüm uyguladınız, çıktıları alırken ilgili ağ kartı takılı mı değildi?
Card-1: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
driver: ath5k bus-ID: 01:00.0 chip-ID: 168c:001c
IF: wlp1s0 state: up mac: <filter>
-
Sizin paylaştığınız çıktılarda RTL8723BE ile ilgili bir donanım görünmüyor. Sistemdeki tek kablosuz ağ cihazı aşağıdaki. Neden farklı bir aygıtla ilgili çözüm uyguladınız, çıktıları alırken ilgili ağ kartı takılı mı değildi?
Foruma üye olmadan önce bir arkadaşımdan yardım istediğimde ağ kartımın RTL8723BE olduğunu söylediği için onu takip ettim. modinfo 8723be çıktısı kafamı karıştırdı, ismi sürekli geçtiği için kartım bu zannediyordum.
Sabrınızı rica ediyorum. Yapmam gereken işlemler nedir?
-
Öncelikle aşağıdaki komutlarla elle yüklediğiniz sürücüyü kaldırın ve yapılandırma dosyasını silin.
sudo dkms remove rtlwifi-new/0.6 --allsudo rm -f /etc/modprobe.d/rtl8723be.confsudo rm -f /etc/modprobe.d/50-rtl8723be.conf
Sizin sisteminizdeki aygıt ath5k sürücüsünü kullanan bir çipsete sahip, bunun için aşağıdaki komutu uçbirimde çalıştıırp sistemi yeniden başlatmayı deneyiniz.
echo "options ath5k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath5k.conf
-
Öncelikle aşağıdaki komutlarla elle yüklediğiniz sürücüyü kaldırın ve yapılandırma dosyasını silin.
sudo dkms remove rtlwifi-new/0.6 --allsudo rm -f /etc/modprobe.d/rtl8723be.confsudo rm -f /etc/modprobe.d/50-rtl8723be.conf
Sizin sisteminizdeki aygıt ath5k sürücüsünü kullanan bir çipsete sahip, bunun için aşağıdaki komutu uçbirimde çalıştıırp sistemi yeniden başlatmayı deneyiniz.
echo "options ath5k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath5k.conf
İyi günler. Değişen bir şey olmadı. Şuan ilk sayfa da yüklenmiyor, ağa bağlıyım.
-
Aşağıdaki komutların çıktılarına bakalım.
cat /etc/modprobe.d/ath5k.conf
lsmod
dkms status
iwconfig | grep Power
-
Aşağıdaki komutların çıktılarına bakalım.
cat /etc/modprobe.d/ath5k.conf
lsmod
dkms status
iwconfig | grep Power
cat /etc/modprobe.d/ath5k.conf
options ath5k nohwcrypt=1
lsmod
Module Size Used by
ccm 20480 3
arc4 16384 2
snd_hda_codec_realtek 94208 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
snd_hda_intel 36864 3
snd_hda_codec 106496 3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_realtek
uvcvideo 81920 0
videobuf2_vmalloc 16384 1 uvcvideo
snd_hda_core 65536 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_realtek
videobuf2_memops 16384 1 videobuf2_vmalloc
snd_hwdep 16384 1 snd_hda_codec
videobuf2_v4l2 20480 1 uvcvideo
snd_pcm 86016 3 snd_hda_intel,snd_hda_codec,snd_hda_core
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videodev 155648 3 uvcvideo,videobuf2_core,videobuf2_v4l2
media 32768 2 uvcvideo,videodev
ath5k 135168 0
snd_seq_midi 16384 0
coretemp 16384 0
ath 24576 1 ath5k
snd_seq_midi_event 16384 1 snd_seq_midi
usblp 20480 0
joydev 20480 0
input_leds 16384 0
mac80211 675840 1 ath5k
snd_rawmidi 28672 1 snd_seq_midi
serio_raw 16384 0
snd_seq 57344 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 28672 2 snd_seq,snd_pcm
lpc_ich 24576 0
snd 69632 16 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
cfg80211 532480 3 mac80211,ath,ath5k
shpchp 32768 0
soundcore 16384 1 snd
eeepc_laptop 20480 0
sparse_keymap 16384 1 eeepc_laptop
mac_hid 16384 0
sch_fq_codel 20480 6
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,parport_pc,ppdev
ip_tables 20480 0
x_tables 28672 1 ip_tables
autofs4 40960 2
btrfs 1081344 0
xor 28672 1 btrfs
zstd_compress 151552 1 btrfs
raid6_pq 106496 1 btrfs
dm_mirror 24576 0
dm_region_hash 20480 1 dm_mirror
dm_log 20480 2 dm_mirror,dm_region_hash
i915 1282048 7
i2c_algo_bit 16384 1 i915
drm_kms_helper 151552 1 i915
syscopyarea 16384 1 drm_kms_helper
psmouse 131072 0
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 339968 9 i915,drm_kms_helper
pata_acpi 16384 0
atl1e 36864 0
video 40960 2 eeepc_laptop,i915
dkms status için bir çıktı yok.
iwconfig | grep Power
lo no wireless extensions.
enp3s0 no wireless extensions.
Bit Rate=1 Mb/s Tx-Power=20 dBm
Power Management:off
-
Aşağıdaki komutları sırasıyla uçbirimde çalıştırdıktan sonra durum ne oluyor?
sudo iw reg set TR
sudo iwconfig enp3s0 rate 54M
sudo service network-manager restart
-
Aşağıdaki komutları sırasıyla uçbirimde çalıştırdıktan sonra durum ne oluyor?
sudo iw reg set TR
sudo iwconfig enp3s0 rate 54M
sudo service network-manager restart
ilk komut için bir çıktı yok.
sudo iwconfig enp3s0 rate 54M
Error for wireless request "Set Bit Rate" (8B20) :
SET failed on device enp3s0 ; Operation not supported.
Son komut çalıştırıldı. Bilgisayarı da yeniden başlattığımda aynı durum söz konusu üstadım.
-
Aşağıdaki komutun çıktısına bakalım.
iw list
Not: Özellikle belirtmedikçe sisteminizi yeniden başlatmaya gerek yok.
-
Aşağıdaki komutun çıktısına bakalım.
iw list
Not: Özellikle belirtmedikçe sisteminizi yeniden başlatmaya gerek yok.
Bilgi için teşekkürler.
iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2285 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CCMP-256 (00-0f-ac:10)
* GCMP-128 (00-0f-ac:8)
* GCMP-256 (00-0f-ac:9)
* CMAC (00-0f-ac:6)
* CMAC-256 (00-0f-ac:13)
* GMAC-128 (00-0f-ac:11)
* GMAC-256 (00-0f-ac:12)
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
Band 1:
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm) (no IR)
* 2472 MHz [13] (20.0 dBm) (no IR)
* 2484 MHz [14] (disabled)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* set_qos_map
* set_multicast_to_unicast
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 2048, #{ AP, mesh point } <= 4,
total <= 2048, #channels <= 1
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports configuring vdev MAC-addr on create.
-
Yanlışlıkla kablolu cihazın arayüzünü (enp3s0) yazmışım, şimdi aşağıdaki komutları sırasıyla çalıştırıp durumu gözlemleyiniz.
sudo iw reg set TR
sudo iwconfig wlp1s0 rate 54M
sudo service network-manager restart
-
Yanlışlıkla kablolu cihazın arayüzünü (enp3s0) yazmışım, şimdi aşağıdaki komutları sırasıyla çalıştırıp durumu gözlemleyiniz.
sudo iw reg set TR
sudo iwconfig wlp1s0 rate 54M
sudo service network-manager restart
İnternete kablolu olarak bağlanıyorum. Kablolu ve kablosuz olarak ayrı ayrı denedim,
sudo iwconfig wlp1s0 rate 54M
Error for wireless request "Set Bit Rate" (8B20) :
SET failed on device wlp1s0 ; Invalid argument.
-
Kablosuz ağ etkin olduğu halde aşağıdaki komutu dener misiniz?
sudo iwconfig wlp1s0 rate 24M
-
sudo iwconfig wlp1s0 rate 24M
[sudo] password for odeppo:
Error for wireless request "Set Bit Rate" (8B20) :
SET failed on device wlp1s0 ; Invalid argument.
Kablosuz bağlantı etkinken denenmiştir.
-
Bu durumda Ndiswrapper ile Windows sürücüsü kullanmayı deneyebiliriz. Bunun için aşğaıdaki komutla gerekli paketleri kurunuz ve sistemi yeniden başlatınız.
sudo apt install ndisgtk ndiswrapper-dkms
Yeniden başlattıktan sonra şağıdaki komutla arayüzü açınız.
sudo ndisgtk
Yeni sürücü yükle (Install new driver) düğmesine tıklayıp, ilgili aygıtın Windows XP için olan sürücüsü dosyalarından .inf uzantılı olanını bulup seçmeyi deneyiniz.
Eğer uygun sürücüyü bulamazsanız, Linux Mint'in artık bakımı yapılmayan mintwifi paketini buradan (http://packages.linuxmint.com/pool/main/m/mintwifi/mintwifi_2.0_all.deb) indirip sağ tık Gdebi ile kurun.
Kurduktan sonra /usr/lib/linuxmint/mintWifi/drivers/i386/Atheros_AR5007eg/ dizini altındaki net5211.inf seçip etkinleştirmeyi deneyin.
Ayrıca aşağıdaki komutla çekirdekle gelen ath5k sürücüsünü pasifleştirin.
sudo rmmod ath5k
-
Tekrar iyi günler ve yardımlarınız için teşekkürler.
XP Driverlarını indirip kurdum. Yalnız usr/lib/linuxmint klasöründe mintwifi klasörü yok. Ayrıca ağ simgesine tıkladığımda kablosuz bağlantıyı etkinleştir butonu görünmüyor. Bilgisayarın wifi'ını kapatıp açmayı da denedim. Değişen bir şey olmadı.
-
Yalnız usr/lib/linuxmint klasöründe mintwifi klasörü yok.
Mintwifi paketini kurduğunuzdan emin misiniz? Öncelikle bu paketi kurmanız gerekiyor.
Paketi kurduktan sonra aşağıdaki komutla sürücüyü ekleyebilirsiniz.
sudo ndiswrapper -i /usr/lib/linuxmint/mintWifi/drivers/i386/Atheros_AR5007eg/net5211.inf
Aşağıdaki komut eklenen sürücüyü gösterir.
ndiswrapper -l
Aşağıdaki komutlarla açılışta otomatik etkinleşmesini sağlayabilirsiniz.
sudo ndiswrapper -ma
Ayrıca şağıdaki komutla ath5k sürücüsünü kalıcı olarak pasifleştirin.
echo "blacklist ath5k" | sudo tee /etc/modprobe.d/ath5k-blacklist.conf
Bu işlemlerden sonra sistemi yeniden başlatın.
-
mintwifi kurulumunu yapamadım. Klasör hala yok ve forumda şuan linkini bulamadığım bir çözümü denedim. mt7630e diye bir driver kurmaya çalıştım sanırım. Ethernete de kablosuza da bağlanamıyorum mobilden yazıyorum.
Not: Ethernet kablosunda bir problem olduğu için bağlanmamış. Ethernet sorunsuz çalışıyor.
-
Peketi kurmakta bir sorun yok, indirin sağ tık Gdebi le kurun, bu kadar.
-
Peketi kurmakta bir sorun yok, indirin sağ tık Gdebi le kurun, bu kadar.
Üstadım onda bir sorun yok. Ben paketi bulmakta sorun yaşıyorum. Link verebilir misiniz?
-
Eğer uygun sürücüyü bulamazsanız, Linux Mint'in artık bakımı yapılmayan mintwifi paketini buradan (http://packages.linuxmint.com/pool/main/m/mintwifi/mintwifi_2.0_all.deb) indirip sağ tık Gdebi ile kurun.
Yukarıdaki mesajda bağlantı eklemiştim.
-
Yukarıdaki mesajda bağlantı eklemiştim.
Gözden kaçmış. Kurdum ve klasör geldi. Söylediğiniz komutlar da uygulandı. Son durum;
sudo ndiswrapper -l
net5211 : driver installed
device (168C:001C) present (alternate driver: ath5k)
netathw : driver installed
device (168C:001C) present (alternate driver: ath5k)
netathwx : driver installed
device (168C:001C) present (alternate driver: ath5k)
sudo rmmod ath5k
rmmod: ERROR: Module ath5k is not currently loaded
Durum çubuğunda ağ simgesine tıkladığımda kablosuzu etkinleştir kısmı görünmüyor. Bilgisayarın wifi'ı açık.
-
Aşağıdaki komutları çalıştırınca durum ne oluyor?
sudo depmod -a
sudo modprobe ndiswrapper
-
Aşağıdaki komutları çalıştırınca durum ne oluyor?
Denendi. Değişen bir şey olmuyor.
-
Bunları yeniden uyguladıktan aşağıdaki komutun çıktısını paylaşınız.
dmesg | grep ndis
-
Bunları yeniden uyguladıktan aşağıdaki komutun çıktısını paylaşınız.
dmesg | grep ndis
Birkaç gündür ilgilenemiyordum. Tekrar denendi ve çıktı;
dmesg | grep ndis
[ 44.230395] ndiswrapper: loading out-of-tree module taints kernel.
[ 44.231287] ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
[ 44.231334] ndiswrapper: module license taints kernel.
[ 44.235028] ndiswrapper version 1.60 loaded (smp=yes, preempt=no)
[ 46.677733] Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev snd_hda_codec_realtek media snd_hda_codec_generic snd_hda_intel snd_hda_codec coretemp snd_hda_core snd_hwdep snd_pcm joydev input_leds snd_seq_midi snd_seq_midi_event serio_raw ndiswrapper(OE+) snd_rawmidi snd_seq lpc_ich snd_seq_device snd_timer snd shpchp soundcore eeepc_laptop sparse_keymap mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops pata_acpi atl1e drm video
[ 46.677887] CPU: 1 PID: 597 Comm: loadndisdriver Tainted: P W OE 4.15.0-36-generic #39-Ubuntu
[ 46.678007] ? wrapper_ioctl+0x821/0xb50 [ndiswrapper]
[ 46.678114] ? unload_wrap_driver+0x130/0x130 [ndiswrapper]
[ 46.679162] ndiswrapper (load_wrap_driver:103): couldn't load driver netathw; check system log for messages from 'loadndisdriver'
[ 46.740618] usbcore: registered new interface driver ndiswrapper
-
ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
BIOS/EFI ayarlarından secure boot özelliğini kapatmayı dener misiniz?
-
BIOS/EFI ayarlarından secure boot özelliğini kapatmayı dener misiniz?
Secure boot diye bir özellik olmadığı için kapatamadım. Quick Boot özelliğini kapatarak denedim.
dmesg | grep ndis
[ 27.341891] ndiswrapper: loading out-of-tree module taints kernel.
[ 27.342433] ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
[ 27.342470] ndiswrapper: module license taints kernel.
[ 27.344502] ndiswrapper version 1.60 loaded (smp=yes, preempt=no)
[ 28.617242] Modules linked in: lpc_ich joydev snd_rawmidi input_leds serio_raw snd_seq snd_seq_device ndiswrapper(OE+) snd_timer snd shpchp eeepc_laptop sparse_keymap soundcore mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq dm_mirror dm_region_hash dm_log i915 hid_generic i2c_algo_bit drm_kms_helper syscopyarea psmouse sysfillrect sysimgblt fb_sys_fops drm pata_acpi atl1e video usbhid hid
[ 28.617325] CPU: 0 PID: 487 Comm: loadndisdriver Tainted: P W OE 4.15.0-38-generic #41-Ubuntu
[ 28.617409] ? wrapper_ioctl+0x821/0xb50 [ndiswrapper]
[ 28.617482] ? unload_wrap_driver+0x130/0x130 [ndiswrapper]
[ 28.618253] ndiswrapper (load_wrap_driver:103): couldn't load driver netathw; check system log for messages from 'loadndisdriver'
[ 28.682605] usbcore: registered new interface driver ndiswrapper
-
Aşağıdaki komutun çıktısına bir daha bakalım.
ndiswrapper -l
-
Aşağıdaki komutun çıktısına bir daha bakalım.
ndiswrapper -l
ndiswrapper -l
net5211 : driver installed
device (168C:001C) present (alternate driver: ath5k)
netathw : driver installed
device (168C:001C) present (alternate driver: ath5k)
netathwx : driver installed
device (168C:001C) present (alternate driver: ath5k)
-
Şimdi aşağıdaki komutlarla bu sürücüleri siliniz.
sudo ndiswrapper -r net5211
sudo ndiswrapper -r netathw
sudo ndiswrapper -r netathwx
Sonra internetten indirdiğiniz sürücüdeki .inf dosyasını kullanarak sürücüyü etkinleştirmeyi deneyiniz. Not: Windows XP için olan 32 bit sürücüyü kullanmalısınız.
Düzenleme: Hatalı komut
-
Şimdi aşağıdaki komutlarla bu sürücüleri siliniz.
sudo ndiswapper -r net5211
sudo ndiswapper -r netathw
sudo ndiswapper -r netathwx
Sonra internetten indirdiğiniz sürücüdeki .inf dosyasını kullanarak sürücüyü etkinleştirmeyi deneyiniz. Not: Windows XP için olan 32 bit sürücüyü kullanmalısınız.
ndiswrapper olarak düzeltelim üstadım r harfini unutmuşsunuz :) 32 bit için olanı indirmiştim. İkisi de bu komutla kuruldu ve ndisgtk üzerinden kontrol ettiğimde kurulu olarak görünüyor. Ancak panel üzerinde ağ simgesine tıkladığımda kablosuz ağa ilişkin bir şey çıkmıyor.
sudo ndiswrapper -i /home/odeppo/İndirilenler/netathwx.inf
installing netathwx ...
forcing parameter MapRegisters from 256 to 64
https://i.hizliresim.com/NDza8Y.png (https://i.hizliresim.com/NDza8Y.png)
-
Buradaki (https://www.helpjet.net/Fs-83331276-63147151-21742244.html) sürücüyü indirip dener misiniz? Öncesinde yüklü olan diğer sürücüyü kaldırın. "Windows XP 32bit" dizini içindeki inf dosyasını kullanacaksınız.
-
Buradaki (https://www.helpjet.net/Fs-83331276-63147151-21742244.html) sürücüyü indirip dener misiniz? Öncesinde yüklü olan diğer sürücüyü kaldırın. "Windows XP 32bit" dizini içindeki inf dosyasını kullanacaksınız.
Kablosuz bağlantuyu etkinleştir yazısı gelmedi. inf dosyasını bu şekilde kurdum doğru mudur?
sudo ndiswrapper -i /home/odeppo/İndirilenler/w32/netathw.inf
-
Evet öyle olacak. Aynı dizin içinde .cat ve .sys dosyası var değil mi?
-
Evet öyle olacak. Aynı dizin içinde .cat ve .sys dosyası var değil mi?
Evet onlar da var. Yazmak kolay olsun diye klasörün adını değiştirdim sadece.