[Çözüldü] Samsung ML-1675 Yazıcı Sürücüsünü buldum Ama nasıl kurabilirim???

[linuxcu]

Samsung ML-1675 yazıcı sürücüsünü yazıcı bul listesinden bulamamıştım Samsung'un sitesinden buldum : http://downloadcenter.samsung.com/content/DR/201403/20140312133051625/ULD_V1.00.21.tar.gz fakat nasıl kuracağımı bilemiyorum lütfen yardım edin! 

Düzenleme: Çözüldü etiketi

[Butterfly]

Sıkıştırılmış dosyayı sağ tık buraya çıkart ile açınız. Açtığınızda içinde install.sh isimili dosyanın bulunduğu dizine ulaşınız.
Uçbirimi açınız ve sudo sh yazıp bir boşuk bırakıp install.sh dosyasını uçbirime sürükleyip bırakınız.

Kod: [Seç]

sudo sh /install.sh/sürükle/bırak
Uçbirimde oluşan komutu giriş (enter) tuşu ile çalıştırmayı deneyiniz.

[linuxcu]

Şu çıktıyı aldım:

Kod: [Seç]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
END-USER LICENSE AGREEMENT FOR SAMSUNG ELECTRONICS SOFTWARE PRODUCT

IMPORTANT-READ CAREFULLY: This Samsung Electronics End-User License Agreement ("
EULA") is a legal agreement between you (either an individual or a single entity
) and Samsung Electronics Co., Ltd. ("SAMSUNG ELECTRONICS") with respect to the
SAMSUNG ELECTRONICS software product intended to be used with the SAMSUNG device
s. The SAMSUNG ELECTRONICS software product may include associated software comp
onents, media, printed materials and "online" or electronic documentation develo
ped and provided by SAMSUNG ELECTRONICS ("SOFTWARE PRODUCT"). For all other thir
d party software products which may be supplied with or for the SAMSUNG devices,
 your use of such software products shall be subject to separate terms of use an
d end user license agreements of such third parties.   By installing, copying, d
ownloading or using the SOFTWARE PRODUCT, you agree to be bound by the terms of
this EULA. If you do not agree to the terms of this EULA, you may not install or
 use the SOFTWARE PRODUCT.

1. GRANT OF LICENSE.
The SOFTWARE PRODUCT is licensed, not sold. Subject to the condition that you ar
e in compliance with the terms of this EULA, SAMSUNG ELECTRONICS grants you the
following licenses: (a) you may install and use one copy of the SOFTWARE PRODUCT
, or any prior version for the same operating system, on a single computer for u
se by a single simultaneous operator; and (b) you may install a single copy of t
he SOFTWARE PRODUCT, strictly for your own personal use, on one portable compute
--Başka--


[Butterfly]

Boşluk tuşu ile devam edebiliyor musunuz?

[linuxcu]

Hepsini Enterlayip "Yesledim" en sonda da "İnstalled Finish"dedi  yazıcı "ML-1670 series sürücüsü hazır" dedi test etmek için denedim ama hata verdi Hata ayıklamayı etkinleştirdim bu da hata günlüğü: 

Kod: [Seç]

D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: No authentication data provided.
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 1.1 Get-Jobs 1
D [15/Mar/2014:15:37:59 +0200] Get-Jobs ipp://localhost/printers/
D [15/Mar/2014:15:37:59 +0200] [Job 1] Loading attributes...
D [15/Mar/2014:15:37:59 +0200] [Job 2] Loading attributes...
D [15/Mar/2014:15:37:59 +0200] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: No authentication data provided.
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 1.1 Get-Jobs 1
D [15/Mar/2014:15:37:59 +0200] Get-Jobs ipp://localhost/printers/
D [15/Mar/2014:15:37:59 +0200] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 GET /admin/conf/cupsd.conf HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: No authentication data provided.
D [15/Mar/2014:15:37:59 +0200] cupsdIsAuthorized: username=""
D [15/Mar/2014:15:37:59 +0200] cupsdSendHeader: 16 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [15/Mar/2014:15:37:59 +0200] cupsdCloseClient: 16
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 GET /admin/conf/cupsd.conf HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: Authorized as ekim using PeerCred
D [15/Mar/2014:15:37:59 +0200] cupsdIsAuthorized: username="ekim"
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 GET /admin/conf/cupsd.conf HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: Authorized as ekim using PeerCred
D [15/Mar/2014:15:37:59 +0200] cupsdIsAuthorized: username="ekim"
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 GET /admin/conf/cupsd.conf HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: Authorized as ekim using PeerCred
D [15/Mar/2014:15:37:59 +0200] cupsdIsAuthorized: username="ekim"
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdReadClient: 16 PUT /admin/conf/cupsd.conf HTTP/1.1
D [15/Mar/2014:15:37:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [15/Mar/2014:15:37:59 +0200] cupsdAuthorize: Authorized as ekim using PeerCred
D [15/Mar/2014:15:37:59 +0200] cupsdIsAuthorized: username="ekim"
I [15/Mar/2014:15:37:59 +0200] Installing config file "/etc/cups/cupsd.conf"...
D [15/Mar/2014:15:38:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [15/Mar/2014:15:38:00 +0200] cupsdCloseClient: 15
D [15/Mar/2014:15:38:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [15/Mar/2014:15:38:00 +0200] cupsdCloseClient: 16
D [15/Mar/2014:15:38:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [15/Mar/2014:15:38:00 +0200] Saving printers.conf...
I [15/Mar/2014:15:38:00 +0200] Generating printcap /var/run/cups/printcap...
I [15/Mar/2014:15:38:00 +0200] Saving subscriptions.conf...
D [15/Mar/2014:15:38:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
E [15/Mar/2014:15:38:00 +0200] Unknown directive SystemGroup on line 4 of /etc/cups/cupsd.conf.
E [15/Mar/2014:15:38:00 +0200] Unknown directive JobPrivateAccess on line 88 of /etc/cups/cupsd.conf.
E [15/Mar/2014:15:38:00 +0200] Unknown directive JobPrivateValues on line 89 of /etc/cups/cupsd.conf.
E [15/Mar/2014:15:38:00 +0200] Unknown directive SubscriptionPrivateAccess on line 90 of /etc/cups/cupsd.conf.
E [15/Mar/2014:15:38:00 +0200] Unknown directive SubscriptionPrivateValues on line 91 of /etc/cups/cupsd.conf.
E [15/Mar/2014:15:38:00 +0200] ML-1670-Series: File "/usr/lib/cups/filter/rastertosplc" not available: No such file or directory
W [15/Mar/2014:15:38:00 +0200] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'ML-1670-Series-Gray..' already exists
W [15/Mar/2014:15:38:00 +0200] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-ML-1670-Series' already exists Bir de yazdırma süzgeci eksikliği var dedi

[Butterfly]

Buradan hangi sürücünün hangi aygıtı desteklediğini incelemiş miydiniz?

Sizin aygıtınız için minimum 3.00.90 sürüm sürücünün kurulması gerekiyor sanırım.

(Printer Series)   Minimum Version     Maximum Version 
ML-1675              3.00.90                                        -

Sizin indirdiğiniz sürücünin sürümü ise 1.00.21. Bu durumda kurduğunuz sürücüyü kaldırmalısınız.
Bunun için uçbirime sudo sh yazın ve bir boşluk bırakıp, 1.00.21 sürüm sürücü dizinindeki uninstall.sh dosyasını uçbirime sürükleyip bırakın.

Kod: [Seç]

sudo sh /uninstall.sh/sürükle/bırak
Uçbirimde oluşan komutu giriş (enter) tuşu ile çalıştırmayı deneyiniz.

Sonra buradan sizin aygıtınızı destekleyen sürümü indirin ve aynı yöntemle kurmayı deneyin.

Sürücüyü kurmadan önce aşağıdaki komutla libstdc++5 paketini kurarsanız, grafik arayüzle kurulum imkanına da kavuşuyorsunuz.

Kod: [Seç]

sudo apt-get install libstdc++5

[linuxcu]

Çok teşekkür ederim artık yazdırabiliyorum, çok sağolun, bu arada cevap yazmakta geciktiğim için özür dilerim.