[Çözüldü] Aşırı Isınma ve Fan Sesi

[Yahya]

Merhaba, Cinnamon 17.03 64 kullanıyorum. Isınma ve fan sesi az kullanımda bile çok çalışıyor. Ayrıca bellek kullanımı boşta 670MB % 17.04 / 3.7GB gibi bir durumda seyrediyor. (firefox 1 sekme ) Bilgisayarım Asus marka 1 senelik bir laptop... Görüş ve önerilerinizi rica ediyorum..

Kod: [Seç]

Linux WAsP 3.19.0-32-generic #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux


Kod: [Seç]

top - 07:57:21 up 24 min,  2 users,  load average: 0,41, 0,34, 0,32
Tasks: 173 total,   1 running, 172 sleeping,   0 stopped,   0 zombie
%Cpu(s):  5,2 us,  1,5 sy,  0,0 ni, 92,5 id,  0,8 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem:   3928136 total,  1739052 used,  2189084 free,    38456 buffers
KiB Swap:  3905532 total,        0 used,  3905532 free.   946832 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND       
 1439 root      20   0  516556 109432  91232 S   4,7  2,8   0:32.08 /usr/bin/X :0+
 2320 yahya     20   0 1739792 152156  58872 S   4,0  3,9   0:34.51 cinnamon --re+
 2681 yahya     20   0  765084 129104  53212 S   3,3  3,3   1:15.80 /usr/lib/fire+
 2182 yahya      9 -11  510600  10188   7876 S   3,0  0,3   0:40.50 /usr/bin/puls+
 2971 yahya     20   0  602132  30208  22192 S   3,0  0,8   0:00.30 gnome-terminal
 2469 yahya     20   0 1266604 274308  89216 S   0,3  7,0   1:31.78 /usr/lib/fire+
 2997 yahya     20   0   26344   3080   2564 R   0,3  0,1   0:00.02 top -c         
    1 root      20   0   33848   4368   2616 S   0,0  0,1   0:01.66 /sbin/init     
    2 root      20   0       0      0      0 S   0,0  0,0   0:00.00 [kthreadd]     
    3 root      20   0       0      0      0 S   0,0  0,0   0:00.46 [ksoftirqd/0] 
    4 root      20   0       0      0      0 S   0,0  0,0   0:00.00 [kworker/0:0] 
    5 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 [kworker/0:0H]
    7 root      20   0       0      0      0 S   0,0  0,0   0:00.73 [rcu_sched]   
    8 root      20   0       0      0      0 S   0,0  0,0   0:00.00 [rcu_bh]       
    9 root      20   0       0      0      0 S   0,0  0,0   0:00.49 [rcuos/0]     
   10 root      20   0       0      0      0 S   0,0  0,0   0:00.00 [rcuob/0]     
   11 root      rt   0       0      0      0 S   0,0  0,0   0:00.00 [migration/0] 
   14 root      rt   0       0      0      0 S   0,0  0,0   0:00.00 [migration/1] 
   15 root      20   0       0      0      0 S   0,0  0,0   0:00.00 [ksoftirqd/1] 
yahya[member=508]wasp[/member] ~ $ ^C
yahya[member=508]wasp[/member] ~ $


Kod: [Seç]

00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b)
Subsystem: ASUSTeK Computer Inc. Device [1043:16cd]
Kernel driver in use: i915
--
04:00.0 3D controller [0302]: NVIDIA Corporation GM108M [GeForce 840M] [10de:1341]

Kod: [Seç]

direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_MESA_texture_signed_rgba, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_light_max_exponent,


Kod: [Seç]

Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
eDP1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
   1366x768       60.0*+
   1360x768       59.8     60.0 
   1024x768       60.0 
   800x600        60.3     56.2 
   640x480        59.9 
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)


Kod: [Seç]

ii  nvidia-352                                  352.63-0ubuntu0.14.04.1                             amd64        NVIDIA binary driver - version 352.63
ii  nvidia-opencl-icd-352                       352.63-0ubuntu0.14.04.1                             amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                                0.6.2linuxmint1                                     amd64        Tools to enable NVIDIA's Prime
ii  nvidia-prime-applet                         1.0.3                                               all          An applet for NVIDIA Prime
ii  nvidia-settings                             331.20-0ubuntu8                                     amd64        Tool for configuring the NVIDIA graphics driver


[Butterfly]

Aşağıdaki komutların çıktılarını da paylaşınız.

Kod: [Seç]

inxi -Fxz
dpkg -l | grep tlp

[Yahya]

Kod: [Seç]

System:    Host: WAsP Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2)
           Desktop: Cinnamon 2.8.8 (Gtk 3.10.8~8+qiana)
           Distro: Linux Mint 17.3 Rosa
Machine:   Mobo: ASUSTeK model: X555LN v: 1.0
           Bios: American Megatrends v: X555LN.311 date: 04/10/2015
CPU:       Dual core Intel Core i5-4210U (-HT-MCP-) cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9577
           clock speeds: max: 2700 MHz 1: 1009 MHz 2: 1699 MHz 3: 1303 MHz
           4: 1045 MHz
Graphics:  Card-1: Intel Haswell-ULT Integrated Graphics Controller
           bus-ID: 00:02.0
           Card-2: NVIDIA GM108M [GeForce 840M] bus-ID: 04:00.0
           Display Server: X.Org 1.17.1 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.0hz
           GLX Renderer: Mesa DRI Intel Haswell Mobile
           GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes
Audio:     Card-1 Intel 8 Series HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 Intel Haswell-ULT HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture v: k3.19.0-32-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0
           IF: eth0 state: down mac: <filter>
           Card-2: Broadcom BCM43142 802.11b/g/n driver: wl bus-ID: 03:00.0
           IF: wlan0 state: up mac: <filter>
Drives:    HDD Total Size: 500.1GB (1.9% used)
           ID-1: /dev/sda model: HGST_HTS545050A7 size: 500.1GB
Partition: ID-1: / size: 455G used: 5.5G (2%) fs: ext4 dev: /dev/sda5
           ID-2: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 44.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 178 Uptime: 3 min Memory: 586.4/3836.1MB
           Init: Upstart runlevel: 2 Gcc sys: 4.8.4
           Client: Shell (bash 4.3.111) inxi: 2.2.28
Mesajlar Birleştirildi.

Kod: [Seç]

ii  tlp                                         0.8-1~trusty                                        all          Save battery power on laptops


[Butterfly]

Peki ısınma ve fan sesi sistemi fişe takılı kullanırken mi oluşuyor?

[Yahya]

Şu an takılı olmadığı zaman da aynı pek bir değişiklik olmuyor! Bu arada daha yeni bakımı yapıldı termal macunu iç temizliği vs vs... mesala sadece fire fox açık 1 birde birkaç sekme açarsam fena oluyor. Ubuntu da da oluyordu ama bu kadar değil. Manjaro fedora antergos kullandım ki onlarıda cinnamom masaüstü kullandım!

[Butterfly]

Birde TLP yapılandırma dosyasına bakalım.

Kod: [Seç]

cat /etc/default/tlp

[Yahya]

Kod: [Seç]

cat /etc/default/tlp
# ------------------------------------------------------------------------------
# tlp - Parameters for power save
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html

# Hint: some features are disabled by default, remove the leading # to enable
# them.

# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1

# Operation mode when no power supply can be detected: AC, BAT
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=AC

# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2

# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60

# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.

# Select a CPU frequency scaling governor:
#   ondemand, powersave, performance, conservative
# Intel Core i processor with intel_pstate driver:
#   powersave, performance
# Important:
#   You *must* disable your distribution's governor settings or conflicts will
#   occur. ondemand is sufficient for *almost all* workloads, you should know
#   what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=ondemand
#CPU_SCALING_GOVERNOR_ON_BAT=ondemand

# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# tlp-stat output, Section "+++ Processor".
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0

# Set Intel P-state performance: 0..100 (%)
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
#CPU_MIN_PERF_ON_AC=0
#CPU_MAX_PERF_ON_AC=100
#CPU_MIN_PERF_ON_BAT=0
#CPU_MAX_PERF_ON_BAT=30

# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0

# Minimize number of used CPU cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1

# Kernel NMI Watchdog:
#   0=disable (default, saves power), 1=enable (for kernel debugging only)
NMI_WATCHDOG=0

# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Frequency voltage pairs are written to:
#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"

# Set CPU performance versus energy savings policy:
#   performance, normal, powersave
# Requires kernel module msr and x86_energy_perf_policy from linux-tools
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave

# Hard disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"

# Hard disk advanced power management level: 1..254, 255 (max saving, min, off)
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"

# Hard disk spin down timeout:
#   0:        spin down disabled
#   1..240:   timeouts from 5s to 20min (in units of 5s)
#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"

# Select IO scheduler for the disk devices: noop, deadline, cfq (Default: cfq);
# Separate values for multiple devices with spaces.
#DISK_IOSCHED="cfq cfq"

# SATA aggressive link power management (ALPM):
#   min_power, medium_power, max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power

# PCI Express Active State Power Management (PCIe ASPM):
#   default, performance, powersave
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave

# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
# (Kernel >= 2.6.35 only, open-source radeon driver explicitly)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low

# Radeon dynamic power management method (DPM): battery, performance
# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery

# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto

# WiFi power saving mode: 1=disable, 5=enable; not supported by all adapters.
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5

# Disable wake on LAN: Y/N
WOL_DISABLE=Y

# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power save.
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1

# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y

# Set to 1 to power off optical drive in UltraBay/MediaBay when running on
# battery. A value of 0 disables this feature (Default).
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"

# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto

# Runtime PM for *all* PCI(e) bus devices, except blacklisted ones:
#   0=disable, 1=enable
RUNTIME_PM_ALL=1

# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"

# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM
# (should prevent accidential power on of hybrid graphics' discrete part).
# Default is "radeon nouveau"; use "" to disable the feature completely.
# Separate multiple drivers with spaces.
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"

# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1

# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically (see below)
#USB_BLACKLIST="1111:2222 3333:4444"

# WWAN devices are excluded from USB autosuspend:
# 0=do not exclude / 1=exclude
USB_BLACKLIST_WWAN=1

# Include listed devices into USB autosuspend even if already excluded
# by the driver or WWAN blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"

# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1

# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
#   are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0

# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"

# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"

# Radio devices to disable on shutdown: bluetooth, wifi, wwan
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"

# Radio devices to enable on shutdown: bluetooth, wifi, wwan
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"

# Radio devices to enable on AC: bluetooth, wifi, wwan
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"

# Radio devices to disable on battery: bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"

# Radio devices to disable on battery when not in use (not connected):
# bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"

# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_TRESH value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main / Internal battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80

# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan

# Hints:
# - Parameters are disabled by default, remove the leading # to enable them.
# - Separate multiple radio devices with spaces.

# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"

# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""

# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""

# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""


[Butterfly]

Aşağıdaki komutla TLP ayar dosyasını açınız.

Kod: [Seç]

sudo gedit /etc/default/tlp
Aşağıdaki satırı,

Kod: [Seç]

TLP_DEFAULT_MODE=AC
aşağıdaki şekilde değiştiriniz.

Kod: [Seç]

TLP_DEFAULT_MODE=BAT
Sonra buradaki düzenlemeyi yapıp sistemi yeniden başlatınız.

[Yahya]

Kod: [Seç]

sudo update-grub
Generating grub configuration file ...
Uyarı: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.
Bulunan linux kalıbı: /boot/vmlinuz-3.19.0-32-generic
Bulunan initrd kalıbı: /boot/initrd.img-3.19.0-32-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
  No volume groups found
bitti

Böyle bir çıktı verdi güncelleme sonrasında umarım başarılı bir çıktıdır.
Dediklerinizi başarılı bir şekilde hata vermeded uyguladım!
Umarım zamanınıza değmiştir.

[Butterfly]

Çıktıda herhangi bir sorun yok, tlp ayar dosyası ile ilgili düzenlemeleri de yaptıysanız durumu gözlemleyip dönüş yaparsınız.

[Yahya]

Evet verdiğiniz çıktılar doğrultusunda hepsini sorunsuz birşekilde gerçekleştirdim, çok teşekkürler! Konuyu şimdilik çözüldü olarak ibare koymuyorum? 1 gün falan gözlemliyip size tekrar geri dönüş yapacağım!
Mesajlar Birleştirildi.[member=8]Butterfly[/member] teşekkürler ilgi ve zamanınız için. Çözüldü olarak işaretlenmiştir.