Gönderen Konu: [Çözüldü] Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor  (Okunma sayısı 9218 defa)

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #15 : 27 Aralık 2019, 17:11:59 »
O zaman Linux Mint 19.2 ile elle Nvidia-390 sürücüsünü kurmayı deneyebilirsiniz. Nvidia-390 sürücüsünde de Xorg sürümü ile ilgili sorun olacağını sanmıyorum. Bununla birlikte Nvidia-340 ve Nvidia-390 sürücüsü legacy olduğu için hızlı destek gelmiyor.

İsterseniz aşağıdaki komutla PPA deposunu ekleyin sisteminize, PPA deposundaki Nvidia-390 sürümü daha güncel (nvidia-390.129) görünüyor.

Kod: [Seç]
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt-get update
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #16 : 27 Aralık 2019, 17:20:45 »
Soyle bir cikti aldim. 390 'ni bulamadi

Kod: [Seç]
deniz[member=424]deniz[/member]-PC:~$ sudo apt-get install nvidia-390
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package nvidia-390 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  libnvidia-gl-390 nvidia-kernel-source-390:i386 nvidia-headless-no-dkms-390:i386
  libnvidia-gl-430:i386 libnvidia-gl-390:i386 nvidia-kernel-source-430 nvidia-kernel-source-390
  nvidia-headless-no-dkms-430 nvidia-headless-no-dkms-390 libnvidia-gl-430 libnvidia-gl-440:i386
  libnvidia-gl-435:i386 libnvidia-gl-415:i386 libnvidia-gl-410:i386 nvidia-kernel-source-440
  nvidia-kernel-source-435 nvidia-kernel-source-415 nvidia-kernel-source-410
  nvidia-headless-no-dkms-440 nvidia-headless-no-dkms-435 nvidia-headless-no-dkms-415
  nvidia-headless-no-dkms-410 libnvidia-gl-440 libnvidia-gl-435 libnvidia-gl-415
  libnvidia-gl-410

E: Package 'nvidia-390' has no installation candidate

Çevrimdışı Leopard

  • Forum Sorumlusu
  • Guru
  • *****
  • İleti: 1063
  • Dağıtım: Linux Mint 20 64-bit
  • Masaüstü Ortamı: Cinnamon
  • Grafik Kartı: Nvidia Geforce GTX 1050
  • İşlemci: Intel Core i7 7700HQ
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #17 : 27 Aralık 2019, 17:21:40 »
340 sürücüsünün son sürümünde x 1.20 ile değişiklikler mevcut. Ancak 390'da var mı emin olamadım.

https://devtalk.nvidia.com/default/topic/1068849

https://devtalk.nvidia.com/default/topic/1066275
The only people who should kill are those prepared themselves to die!



Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #18 : 27 Aralık 2019, 17:22:53 »
nvidia-drive-390 nvidia-settings yukleyeyim mi ?

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #19 : 27 Aralık 2019, 17:25:48 »
[member=4032]dbedel[/member] ,  Linux Mint 19.2 kurduysanız ve Ubuntu'da bu sürücüyü kullanabildiyseniz, yüklemenizde bir sakınca olacağını sanmıyorum. PPA deposundaki sürümü deneyin ve secureboot özelliğinin kapalı oduğundan emin olun.



[member=3240]Leopard[/member] , değişim notlarına göre eklenmiş görünüyor. Bu durum Linux Mint 19.2 ile sorun olmayacaktır.


Alıntı
nvidia-graphics-drivers-390 (390.77-0ubuntu0.18.04.2) bionic; urgency=medium

  * debian/rules.defs:
    - Add support for xserver-xorg-core-hwe-18.04 (LP: #1815579).

 -- Alberto Milone <alberto.milone@canonical.com>  Thu, 14 Feb 2019 16:14:57 +0100
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #20 : 27 Aralık 2019, 17:32:53 »
Yok açılmıyor ekran siyah ekrana bakıyorum sü an ^_^. Bu haldeyken bakabileceğimiz bir çıktı var mı? Bir de sanırım hala X11 yüklü. cd /etc/X  ‘tab’ yapınca X11 e tamamlıyor

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #21 : 27 Aralık 2019, 17:44:04 »
Secureboot kapalı mı?
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #22 : 27 Aralık 2019, 17:56:24 »
Açıktı daha onceden. Kapatmak için şifre girdim kapattım reboot ardindan şifreyi silmistim. Ama bu mint kurulumundan önceydi

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #23 : 27 Aralık 2019, 18:01:19 »
Sistemi kurtarma kipi => resume seçeneği ile masaüstüne ulaşabilirsin. Aşağıdaki omutla secureboot durumuna bakabilirsin.

Kod: [Seç]
mokutil --sb-state
Öncesinde, kurulu değilse mokutil paketini kurunuz.

TTY ekranında aşğaıdaki komutu çalıştırırsanız (sekme - tab tuşu ile dosya adına kolayca ulaşırsınız),

Kod: [Seç]
sudo cp /var/log/Xorg.0.log /var/log/Xorg.0.log.yedek
masaüstüne ulaştığınızda aşağıdaki komutla çıktısına bakabilir ve paylaşabilirsiniz.

Kod: [Seç]
xed /var/log/Xorg.0.log.yedek


Bir de daha fazla bilgi lütfen, mesela bu durumu Linux Mint 19.2 ile mi yaşadınız, Nvidia PPA deposunu eklediniz mi? Bunun gibi hususları ayrıca belirtiniz.
« Son Düzenleme: 27 Aralık 2019, 18:03:11 Gönderen: Butterfly »
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #24 : 27 Aralık 2019, 18:08:31 »
Yok resume ile de açamadım masa üstu ortamını. Alt+f2 ile islemleri gerçekleştirip çıktısını bir dosyaya yazdiracağım sonra da sürücüyü silip tekrardan rebbot ile dosyanin içeriğini size yollayacağım

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #25 : 27 Aralık 2019, 18:11:47 »
Elle kurduğunuzda, nvidia-prime paketini de kurdunuz mu? Bir de aşağıdaki komutun çıktısı gerekli olabilir.

Kod: [Seç]
cat /var/log/gpu-manager.log
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #26 : 27 Aralık 2019, 18:13:07 »
Bu arada
Kod: [Seç]
mokutil --sb-state
Kod: [Seç]
EFI variables are not supported on this systemHatası veriyor ama biostan girip baktım seçim karartılmış yani secim yapamiyorum ama disable yazıyor sanırım kapalı

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #27 : 27 Aralık 2019, 18:15:04 »
EFI destekli sisteme klasik kipte kurulum yapmış olabilirsiniz. Bu durumda secureboot etkisiz olamalı. Diğer hususlar için dönüş yaparsınız.
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı dbedel

  • Yeni Penguen
  • *
  • İleti: 40
  • Dağıtım: Linux Mint
  • Masaüstü Ortamı: Xfce
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #28 : 27 Aralık 2019, 18:41:19 »
Kod: [Seç]
xed /var/log/Xorg.0.log.yedek
cok uzun onu nasil atabilecegimi bulamadim tek basina 4bin karakteri geciyor.

Sistemi kurtarma kipi => resume seçeneği ile masaüstüne ulaşabilirsin. Aşağıdaki omutla secureboot durumuna bakabilirsin.

Kod: [Seç]
mokutil --sb-state
Öncesinde, kurulu değilse mokutil paketini kurunuz.

TTY ekranında aşğaıdaki komutu çalıştırırsanız (sekme - tab tuşu ile dosya adına kolayca ulaşırsınız),

Kod: [Seç]
sudo cp /var/log/Xorg.0.log /var/log/Xorg.0.log.yedek
masaüstüne ulaştığınızda aşağıdaki komutla çıktısına bakabilir ve paylaşabilirsiniz.

Kod: [Seç]
xed /var/log/Xorg.0.log.yedek


Bir de daha fazla bilgi lütfen, mesela bu durumu Linux Mint 19.2 ile mi yaşadınız, Nvidia PPA deposunu eklediniz mi? Bunun gibi hususları ayrıca belirtiniz.

Butun islemler  Linux Mint 19.2 degerceklestirildi. En basta PPA deposunu ekledim ve nvidia-390 yuklemeyi denedim olmayinca nvidia-driver-390 yukeldim. Onda ekran acilmadi.

 /var/log/gpu-manager.log
Kod: [Seç]
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /opt/amdgpu-pro/bin/amdgpu-pro-px
Looking for nvidia modules in /lib/modules/4.15.0-72-generic/updates/dkms
Looking for amdgpu modules in /lib/modules/4.15.0-72-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is amdgpu versioned? no
Is amdgpu pro stack? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is nvidia kernel module available? no
Is amdgpu kernel module available? no
Vendor/Device Id: 8086:166
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:1140
BusID "PCI:1@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card1", driven by "nouveau"
Number of connected outputs for /dev/dri/card1: 0
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 2
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
Intel IGP detected
Desktop system detected
or laptop with open drivers
Nothing to do
digerini nasil atacagimi bilmiyorum ^^


Mesajlar Birleştirildi.
Kod: [Seç]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    29.978] X Protocol Version 11, Revision 0
[    29.978] Build Operating System: Linux 4.4.0-148-generic x86_64 Ubuntu
[    29.978] Current Operating System: Linux deniz-PC 4.15.0-72-generic #81-Ubuntu SMP Tue Nov 26 12:20:02 UTC 2019 x86_64
[    29.978] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-72-generic root=UUID=d93787cb-a977-48b3-8cf3-dc4d98952b8e ro quiet splash vt.handoff=1
[    29.978] Build Date: 03 June 2019  08:10:35AM
[    29.978] xorg-server 2:1.19.6-1ubuntu4.3 (For technical support please see http://www.ubuntu.com/support)
[    29.978] Current version of pixman: 0.34.0
[    29.978] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    29.978] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    29.978] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 27 18:10:15 2019
[    29.998] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.041] (==) No Layout section.  Using the first Screen section.
[    30.041] (==) No screen section available. Using defaults.
[    30.041] (**) |-->Screen "Default Screen Section" (0)
[    30.041] (**) |   |-->Monitor "<default monitor>"
[    30.041] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    30.041] (==) Automatically adding devices
[    30.041] (==) Automatically enabling devices
[    30.041] (==) Automatically adding GPU devices
[    30.041] (==) Automatically binding GPU devices
[    30.041] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    30.114] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    30.114] Entry deleted from font path.
[    30.114] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    30.114] Entry deleted from font path.
[    30.114] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    30.114] Entry deleted from font path.
[    30.135] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    30.135] Entry deleted from font path.
[    30.135] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    30.135] Entry deleted from font path.
[    30.135] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    30.135] (==) ModulePath set to "/usr/lib/xorg/modules"
[    30.135] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.135] (II) Loader magic: 0x55bb82832020
[    30.135] (II) Module ABI versions:
[    30.135] X.Org ANSI C Emulation: 0.4
[    30.135] X.Org Video Driver: 23.0
[    30.135] X.Org XInput driver : 24.1
[    30.135] X.Org Server Extension : 10.0
[    30.136] (++) using VT number 7

[    30.136] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    30.137] (II) xfree86: Adding drm device (/dev/dri/card1)
[    30.137] (II) xfree86: Adding drm device (/dev/dri/card0)
[    30.151] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[    30.151] (**) OutputClass "Nvidia Prime" ModulePath extended to "/x86_64-linux-gnu/nvidia/xorg,/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[    30.151] (**) OutputClass "Nvidia Prime" setting /dev/dri/card1 as PrimaryGPU
[    30.153] (--) PCI: (0:0:2:0) 8086:0166:1025:064b rev 9, Mem @ 0xb3000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[    30.153] (--) PCI:*(0:1:0:0) 10de:1140:1025:0691 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[    30.153] (II) LoadModule: "glx"
[    30.166] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/libglx.so
[    30.683] (II) Module glx: vendor="NVIDIA Corporation"
[    30.683] compiled for 4.0.2, module version = 1.0.0
[    30.683] Module class: X.Org Server Extension
[    30.692] (II) NVIDIA GLX Module  390.129  Tue Jul 23 00:23:45 PDT 2019
[    30.704] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    30.704] loading driver: nvidia
[    30.704] (II) Applying OutputClass "Nvidia Prime" to /dev/dri/card1
[    30.704] loading driver: nvidia
[    30.704] (==) Matched nvidia as autoconfigured driver 0
[    30.704] (==) Matched nvidia as autoconfigured driver 1
[    30.704] (==) Matched nouveau as autoconfigured driver 2
[    30.704] (==) Matched nouveau as autoconfigured driver 3
[    30.704] (==) Matched modesetting as autoconfigured driver 4
[    30.704] (==) Matched fbdev as autoconfigured driver 5
[    30.704] (==) Matched vesa as autoconfigured driver 6
[    30.704] (==) Assigned the driver to the xf86ConfigLayout
[    30.704] (II) LoadModule: "nvidia"
[    30.704] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[    30.852] (II) Module nvidia: vendor="NVIDIA Corporation"
[    30.852] compiled for 4.0.2, module version = 1.0.0
[    30.852] Module class: X.Org Video Driver
[    30.859] (II) LoadModule: "nouveau"
[    30.859] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    30.886] (II) Module nouveau: vendor="X.Org Foundation"
[    30.886] compiled for 1.19.3, module version = 1.0.15
[    30.886] Module class: X.Org Video Driver
[    30.886] ABI class: X.Org Video Driver, version 23.0
[    30.886] (II) LoadModule: "modesetting"
[    30.886] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    30.886] (II) Module modesetting: vendor="X.Org Foundation"
[    30.886] compiled for 1.19.6, module version = 1.19.6
[    30.886] Module class: X.Org Video Driver
[    30.886] ABI class: X.Org Video Driver, version 23.0
[    30.886] (II) LoadModule: "fbdev"
[    30.886] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.886] (II) Module fbdev: vendor="X.Org Foundation"
[    30.886] compiled for 1.19.3, module version = 0.4.4
[    30.886] Module class: X.Org Video Driver
[    30.886] ABI class: X.Org Video Driver, version 23.0
[    30.886] (II) LoadModule: "vesa"
[    30.887] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.887] (II) Module vesa: vendor="X.Org Foundation"
[    30.887] compiled for 1.19.3, module version = 2.3.4
[    30.887] Module class: X.Org Video Driver
[    30.887] ABI class: X.Org Video Driver, version 23.0
[    30.887] (II) NVIDIA dlloader X Driver  390.129  Mon Jul 22 23:59:27 PDT 2019
[    30.887] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.887] (II) NOUVEAU driver Date:   Fri Apr 21 14:41:17 2017 -0400
[    30.888] (II) NOUVEAU driver for NVIDIA chipset families :
[    30.888] RIVA TNT        (NV04)
[    30.888] RIVA TNT2       (NV05)
[    30.888] GeForce 256     (NV10)
[    30.888] GeForce 2       (NV11, NV15)
[    30.888] GeForce 4MX     (NV17, NV18)
[    30.888] GeForce 3       (NV20)
[    30.888] GeForce 4Ti     (NV25, NV28)
[    30.888] GeForce FX      (NV3x)
[    30.888] GeForce 6       (NV4x)
[    30.888] GeForce 7       (G7x)
[    30.888] GeForce 8       (G8x)
[    30.888] GeForce GTX 200 (NVA0)
[    30.888] GeForce GTX 400 (NVC0)
[    30.888] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    30.888] (II) FBDEV: driver for framebuffer: fbdev
[    30.888] (II) VESA: driver for VESA chipsets: vesa
[    30.902] (II) Loading sub module "fb"
[    30.902] (II) LoadModule: "fb"
[    30.902] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.902] (II) Module fb: vendor="X.Org Foundation"
[    30.902] compiled for 1.19.6, module version = 1.0.0
[    30.902] ABI class: X.Org ANSI C Emulation, version 0.4
[    30.902] (II) Loading sub module "wfb"
[    30.902] (II) LoadModule: "wfb"
[    30.902] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.957] (II) Module wfb: vendor="X.Org Foundation"
[    30.957] compiled for 1.19.6, module version = 1.0.0
[    30.957] ABI class: X.Org ANSI C Emulation, version 0.4
[    30.957] (II) Loading sub module "ramdac"
[    30.957] (II) LoadModule: "ramdac"
[    30.957] (II) Module "ramdac" already built-in
[    30.959] (WW) Falling back to old probe method for modesetting
[    30.964] (WW) Falling back to old probe method for fbdev
[    30.964] (II) Loading sub module "fbdevhw"
[    30.964] (II) LoadModule: "fbdevhw"
[    30.965] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    30.965] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.965] compiled for 1.19.6, module version = 0.0.2
[    30.965] ABI class: X.Org Video Driver, version 23.0
[    30.965] (WW) Falling back to old probe method for vesa
[    30.981] (II) modeset(G0): using drv /dev/dri/card0
[    30.981] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    30.981] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    30.981] (==) NVIDIA(0): RGB weight 888
[    30.981] (==) NVIDIA(0): Default visual is TrueColor
[    30.981] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.984] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    30.984] (II) Applying OutputClass "Nvidia Prime" options to /dev/dri/card1
[    30.984] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    30.984] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[    30.984] (**) NVIDIA(0): Enabling 2D acceleration
[    31.147] (II) NVIDIA(0): NVIDIA GPU GeForce 710M (GF117) at PCI:1:0:0 (GPU-0)
[    31.147] (--) NVIDIA(0): Memory: 2097152 kBytes
[    31.147] (--) NVIDIA(0): VideoBIOS: 75.17.48.00.0a
[    31.147] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[    31.147] (II) NVIDIA(0): Validated MetaModes:
[    31.147] (II) NVIDIA(0):     "NULL"
[    31.147] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    31.147] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    31.147] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    31.147] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    31.147] (==) modeset(G0): RGB weight 888
[    31.147] (==) modeset(G0): Default visual is TrueColor
[    31.147] (II) Loading sub module "glamoregl"
[    31.147] (II) LoadModule: "glamoregl"
[    31.147] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    31.231] (II) Module glamoregl: vendor="X.Org Foundation"
[    31.231] compiled for 1.19.6, module version = 1.0.0
[    31.231] ABI class: X.Org ANSI C Emulation, version 0.4
[    31.231] (II) glamor: OpenGL accelerated X.org driver based.
[    31.616] (II) glamor: EGL version 1.4:
[    31.689] (II) modeset(G0): glamor initialized
[    31.689] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[    31.694] (II) modeset(G0): Output VGA-1-1 has no monitor section
[    31.702] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    31.702] (II) modeset(G0): Output DP-1-1 has no monitor section
[    31.702] (II) modeset(G0): EDID for output LVDS-1-1
[    31.702] (II) modeset(G0): Manufacturer: AUO  Model: 22ec  Serial#: 0
[    31.702] (II) modeset(G0): Year: 2011  Week: 0
[    31.702] (II) modeset(G0): EDID Version: 1.4
[    31.702] (II) modeset(G0): Digital Display Input
[    31.702] (II) modeset(G0): 6 bits per channel
[    31.702] (II) modeset(G0): Digital interface is undefined
[    31.702] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    31.702] (II) modeset(G0): Gamma: 2.20
[    31.702] (II) modeset(G0): No DPMS capabilities specified
[    31.702] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[    31.702] (II) modeset(G0): First detailed timing is preferred mode
[    31.702] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    31.702] (II) modeset(G0): redX: 0.580 redY: 0.335   greenX: 0.330 greenY: 0.565
[    31.703] (II) modeset(G0): blueX: 0.155 blueY: 0.140   whiteX: 0.313 whiteY: 0.329
[    31.703] (II) modeset(G0): Manufacturer's mask: 0
[    31.703] (II) modeset(G0): Supported detailed timing:
[    31.703] (II) modeset(G0): clock: 73.3 MHz   Image Size:  344 x 193 mm
[    31.703] (II) modeset(G0): h_active: 1366  h_sync: 1382  h_sync_end 1398 h_blank_end 1550 h_border: 0
[    31.703] (II) modeset(G0): v_active: 768  v_sync: 771  v_sync_end 785 v_blanking: 788 v_border: 0
[    31.703] (II) modeset(G0): Unknown vendor-specific block f
[    31.703] (II) modeset(G0):  AUO
[    31.703] (II) modeset(G0):  B156XTN02.2
[    31.703] (II) modeset(G0): EDID (in hex):
[    31.703] (II) modeset(G0): 00ffffffffffff0006afec2200000000
[    31.703] (II) modeset(G0): 001501049022137802bbf59455549027
[    31.703] (II) modeset(G0): 23505400000001010101010101010101
[    31.703] (II) modeset(G0): 010101010101a21c56b8500014301010
[    31.703] (II) modeset(G0): 3e0058c1100000180000000f00000000
[    31.703] (II) modeset(G0): 00000000000000000020000000fe0041
[    31.703] (II) modeset(G0): 554f0a202020202020202020000000fe
[    31.703] (II) modeset(G0): 004231353658544e30322e32200a0072
[    31.703] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[    31.703] (II) modeset(G0): Modeline "1366x768"x60.0   73.30  1366 1382 1398 1550  768 771 785 788 -hsync -vsync (47.3 kHz eP)
[    31.703] (II) modeset(G0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    31.703] (II) modeset(G0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    31.703] (II) modeset(G0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    31.703] (II) modeset(G0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    31.703] (II) modeset(G0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    31.704] (II) modeset(G0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    31.704] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    31.704] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    31.704] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    31.704] (II) modeset(G0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    31.704] (II) modeset(G0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    31.704] (II) modeset(G0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    31.704] (II) modeset(G0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    31.704] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    31.704] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    31.704] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    31.704] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    31.704] (II) modeset(G0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    31.704] (II) modeset(G0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    31.704] (II) modeset(G0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    31.704] (II) modeset(G0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    31.704] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    31.704] (II) modeset(G0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    31.704] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    31.704] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

Mesajlar Birleştirildi.
Kod: [Seç]
[    31.704] (II) modeset(G0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    31.704] (II) modeset(G0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    31.704] (II) modeset(G0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    31.704] (II) modeset(G0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    31.704] (II) modeset(G0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    31.704] (II) modeset(G0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    31.704] (II) modeset(G0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    31.704] (II) modeset(G0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    31.705] (II) modeset(G0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    31.705] (II) modeset(G0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    31.705] (II) modeset(G0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    31.705] (II) modeset(G0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    31.705] (II) modeset(G0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    31.705] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    31.705] (II) modeset(G0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    31.705] (II) modeset(G0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    31.705] (II) modeset(G0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    31.705] (II) modeset(G0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    31.705] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    31.705] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    31.705] (II) modeset(G0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    31.705] (II) modeset(G0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    31.705] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    31.705] (II) modeset(G0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    31.705] (II) modeset(G0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    31.705] (II) modeset(G0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    31.705] (II) modeset(G0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    31.710] (II) modeset(G0): EDID for output VGA-1-1
[    31.719] (II) modeset(G0): EDID for output HDMI-1-1
[    31.719] (II) modeset(G0): EDID for output DP-1-1
[    31.719] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    31.719] (==) modeset(G0): DPI set to (96, 96)
[    31.720] (II) Loading sub module "fb"
[    31.720] (II) LoadModule: "fb"
[    31.720] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.720] (II) Module fb: vendor="X.Org Foundation"
[    31.720] compiled for 1.19.6, module version = 1.0.0
[    31.720] ABI class: X.Org ANSI C Emulation, version 0.4
[    31.720] (II) UnloadModule: "nouveau"
[    31.720] (II) Unloading nouveau
[    31.720] (II) UnloadModule: "fbdev"
[    31.720] (II) Unloading fbdev
[    31.720] (II) UnloadSubModule: "fbdevhw"
[    31.720] (II) Unloading fbdevhw
[    31.720] (II) UnloadModule: "vesa"
[    31.720] (II) Unloading vesa
[    31.720] (--) Depth 24 pixmap format is 32 bpp
[    31.784] (==) modeset(G0): Backing store enabled
[    31.784] (==) modeset(G0): Silken mouse enabled
[    31.784] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.813] (==) modeset(G0): DPMS enabled
[    31.813] (II) modeset(G0): [DRI2] Setup complete
[    31.813] (II) modeset(G0): [DRI2]   DRI driver: i965
[    31.813] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[    31.814] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    31.814] (II) NVIDIA:     access.
[    31.854] (II) NVIDIA(0): Setting mode "NULL"
[    31.870] (==) NVIDIA(0): Disabling shared memory pixmaps
[    31.870] (==) NVIDIA(0): Backing store enabled
[    31.870] (==) NVIDIA(0): Silken mouse enabled
[    31.870] (==) NVIDIA(0): DPMS enabled
[    31.901] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    31.902] (II) Loading sub module "dri2"
[    31.902] (II) LoadModule: "dri2"
[    31.902] (II) Module "dri2" already built-in
[    31.902] (II) NVIDIA(0): [DRI2] Setup complete
[    31.902] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    31.902] (--) RandR disabled
[    31.917] (II) SELinux: Disabled on system
[    31.917] (II) Initializing extension GLX
[    31.917] (II) Indirect GLX disabled.
[    32.208] (II) modeset(G0): Damage tracking initialized
[    32.560] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.560] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.560] (II) LoadModule: "libinput"
[    32.560] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    32.622] (II) Module libinput: vendor="X.Org Foundation"
[    32.622] compiled for 1.19.6, module version = 0.27.1
[    32.622] Module class: X.Org XInput Driver
[    32.622] ABI class: X.Org XInput driver, version 24.1
[    32.622] (II) Using input driver 'libinput' for 'Power Button'
[    32.622] (**) Power Button: always reports core events
[    32.622] (**) Option "Device" "/dev/input/event3"
[    32.622] (**) Option "_source" "server/udev"
[    32.623] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    32.623] (II) event3  - Power Button: device is a keyboard

Mesajlar Birleştirildi.
Kod: [Seç]
[    32.623] (II) event3  - Power Button: device removed
[    32.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    32.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.636] (**) Option "xkb_model" "pc105"
[    32.636] (**) Option "xkb_layout" "gb"
[    32.662] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    32.662] (II) event3  - Power Button: device is a keyboard
[    32.663] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    32.663] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.663] (II) Using input driver 'libinput' for 'Video Bus'
[    32.663] (**) Video Bus: always reports core events
[    32.663] (**) Option "Device" "/dev/input/event6"
[    32.663] (**) Option "_source" "server/udev"
[    32.664] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    32.664] (II) event6  - Video Bus: device is a keyboard
[    32.664] (II) event6  - Video Bus: device removed
[    32.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[    32.680] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.680] (**) Option "xkb_model" "pc105"
[    32.680] (**) Option "xkb_layout" "gb"
[    32.681] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    32.681] (II) event6  - Video Bus: device is a keyboard
[    32.682] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    32.682] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.682] (II) Using input driver 'libinput' for 'Power Button'
[    32.683] (**) Power Button: always reports core events
[    32.683] (**) Option "Device" "/dev/input/event0"
[    32.683] (**) Option "_source" "server/udev"
[    32.683] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    32.684] (II) event0  - Power Button: device is a keyboard
[    32.684] (II) event0  - Power Button: device removed
[    32.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[    32.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    32.712] (**) Option "xkb_model" "pc105"
[    32.712] (**) Option "xkb_layout" "gb"
[    32.713] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    32.713] (II) event0  - Power Button: device is a keyboard
[    32.714] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    32.714] (II) No input driver specified, ignoring this device.
[    32.714] (II) This device may have been added with another device file.
[    32.715] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    32.715] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    32.715] (II) Using input driver 'libinput' for 'Sleep Button'
[    32.715] (**) Sleep Button: always reports core events
[    32.715] (**) Option "Device" "/dev/input/event2"
[    32.715] (**) Option "_source" "server/udev"
[    32.716] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    32.716] (II) event2  - Sleep Button: device is a keyboard
[    32.716] (II) event2  - Sleep Button: device removed
[    32.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2/event2"
[    32.740] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    32.740] (**) Option "xkb_model" "pc105"
[    32.740] (**) Option "xkb_layout" "gb"
[    32.741] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    32.741] (II) event2  - Sleep Button: device is a keyboard
[    32.742] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    32.742] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.743] (II) Using input driver 'libinput' for 'Video Bus'
[    32.743] (**) Video Bus: always reports core events
[    32.743] (**) Option "Device" "/dev/input/event5"
[    32.743] (**) Option "_source" "server/udev"
[    32.744] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    32.744] (II) event5  - Video Bus: device is a keyboard
[    32.744] (II) event5  - Video Bus: device removed
[    32.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input7/event5"
[    32.776] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[    32.776] (**) Option "xkb_model" "pc105"
[    32.776] (**) Option "xkb_layout" "gb"
[    32.777] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    32.777] (II) event5  - Video Bus: device is a keyboard
[    32.778] (II) config/udev: Adding input device SINOWEALTH Game Mouse (/dev/input/event7)
[    32.778] (**) SINOWEALTH Game Mouse: Applying InputClass "libinput pointer catchall"
[    32.778] (II) Using input driver 'libinput' for 'SINOWEALTH Game Mouse'
[    32.778] (**) SINOWEALTH Game Mouse: always reports core events
[    32.778] (**) Option "Device" "/dev/input/event7"
[    32.778] (**) Option "_source" "server/udev"
[    32.836] (II) event7  - SINOWEALTH Game Mouse: is tagged by udev as: Mouse
[    32.836] (II) event7  - SINOWEALTH Game Mouse: device is a pointer
[    32.836] (II) event7  - SINOWEALTH Game Mouse: device removed
[    32.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:258A:1007.0001/input/input9/event7"
[    32.868] (II) XINPUT: Adding extended input device "SINOWEALTH Game Mouse" (type: MOUSE, id 11)
[    32.868] (**) Option "AccelerationScheme" "none"
[    32.868] (**) SINOWEALTH Game Mouse: (accel) selected scheme none/0
[    32.868] (**) SINOWEALTH Game Mouse: (accel) acceleration factor: 2.000
[    32.868] (**) SINOWEALTH Game Mouse: (accel) acceleration threshold: 4
[    32.928] (II) event7  - SINOWEALTH Game Mouse: is tagged by udev as: Mouse
[    32.928] (II) event7  - SINOWEALTH Game Mouse: device is a pointer
[    32.929] (II) config/udev: Adding input device SINOWEALTH Game Mouse (/dev/input/mouse0)
[    32.929] (II) No input driver specified, ignoring this device.
[    32.929] (II) This device may have been added with another device file.
[    32.930] (II) config/udev: Adding input device SINOWEALTH Game Mouse (/dev/input/event8)
[    32.930] (**) SINOWEALTH Game Mouse: Applying InputClass "libinput keyboard catchall"
[    32.930] (II) Using input driver 'libinput' for 'SINOWEALTH Game Mouse'
[    32.930] (**) SINOWEALTH Game Mouse: always reports core events
[    32.930] (**) Option "Device" "/dev/input/event8"
[    32.930] (**) Option "_source" "server/udev"
[    32.930] (II) event8  - SINOWEALTH Game Mouse: is tagged by udev as: Keyboard
[    32.931] (II) event8  - SINOWEALTH Game Mouse: device is a keyboard
[    32.931] (II) event8  - SINOWEALTH Game Mouse: device removed
[    32.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:258A:1007.0002/input/input10/event8"
[    32.944] (II) XINPUT: Adding extended input device "SINOWEALTH Game Mouse" (type: KEYBOARD, id 12)
[    32.944] (**) Option "xkb_model" "pc105"
[    32.944] (**) Option "xkb_layout" "gb"
[    32.945] (II) event8  - SINOWEALTH Game Mouse: is tagged by udev as: Keyboard
[    32.945] (II) event8  - SINOWEALTH Game Mouse: device is a keyboard
[    32.945] (II) config/udev: Adding input device DATACOMP SteelS쀁Љ̒DATA (/dev/input/event9)
[    32.946] (**) DATACOMP SteelS쀁Љ̒DATA: Applying InputClass "libinput keyboard catchall"
[    32.946] (II) Using input driver 'libinput' for 'DATACOMP SteelS쀁Љ̒DATA'
[    32.946] (**) DATACOMP SteelS쀁Љ̒DATA: always reports core events
[    32.946] (**) Option "Device" "/dev/input/event9"
[    32.946] (**) Option "_source" "server/udev"
[    32.946] (II) event9  - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[    32.946] (II) event9  - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[    32.946] (II) event9  - DATACOMP SteelS쀁Љ̒DATA: device removed
[    32.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04B4:0101.0003/input/input11/event9"
[    32.960] (II) XINPUT: Adding extended input device "DATACOMP SteelS쀁Љ̒DATA" (type: KEYBOARD, id 13)
[    32.960] (**) Option "xkb_model" "pc105"
[    32.960] (**) Option "xkb_layout" "gb"
[    32.961] (II) event9  - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[    32.961] (II) event9  - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[    32.961] (II) config/udev: Adding input device DATACOMP SteelS쀁Љ̒DATA (/dev/input/event11)
[    32.961] (**) DATACOMP SteelS쀁Љ̒DATA: Applying InputClass "libinput keyboard catchall"
[    32.961] (II) Using input driver 'libinput' for 'DATACOMP SteelS쀁Љ̒DATA'
[    32.962] (**) DATACOMP SteelS쀁Љ̒DATA: always reports core events
[    32.962] (**) Option "Device" "/dev/input/event11"
[    32.962] (**) Option "_source" "server/udev"
[    32.962] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[    32.962] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[    32.962] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: device removed
[    32.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04B4:0101.0004/input/input12/event11"
[    32.976] (II) XINPUT: Adding extended input device "DATACOMP SteelS쀁Љ̒DATA" (type: KEYBOARD, id 14)
[    32.976] (**) Option "xkb_model" "pc105"
[    32.976] (**) Option "xkb_layout" "gb"
[    32.977] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: is tagged by udev as: Keyboard
[    32.977] (II) event11 - DATACOMP SteelS쀁Љ̒DATA: device is a keyboard
[    32.977] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event16)
[    32.977] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[    32.977] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[    32.977] (**) HD WebCam: HD WebCam: always reports core events
[    32.977] (**) Option "Device" "/dev/input/event16"
[    32.978] (**) Option "_source" "server/udev"
[    32.978] (II) event16 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    32.978] (II) event16 - HD WebCam: HD WebCam: device is a keyboard
[    32.978] (II) event16 - HD WebCam: HD WebCam: device removed
[    33.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17/event16"
[    33.024] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 15)
[    33.024] (**) Option "xkb_model" "pc105"
[    33.024] (**) Option "xkb_layout" "gb"
[    33.025] (II) event16 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    33.025] (II) event16 - HD WebCam: HD WebCam: device is a keyboard
[    33.025] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)

Mesajlar Birleştirildi.
Bu kod biraz daha boyle devam ediyor.
« Son Düzenleme: 27 Aralık 2019, 19:07:19 Gönderen: dbedel »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 19.3 - GeForce 710M - Nvidia Sürücüsü Kurulamıyor
« Yanıtla #29 : 27 Aralık 2019, 19:10:54 »
Alıntı
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
Intel IGP detected
Desktop system detected
or laptop with open drivers

Daha önce de sormuştum ama gözden kaçtı sanırım, nvidia-prime paketi kurulu mu? Değilse nvidia sürücüsü ile bunu da kurunuz.
« Son Düzenleme: 27 Aralık 2019, 19:12:36 Gönderen: Butterfly »
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]