Sorunum şudur, ilk anlatımdaki Bumblebee kurulumuyla 331 driverini kurmuş sorunsuz bir şekilde kullanmaktaydım ve sonraki gücel driver konusunda anlatıldığı gibi güncelledim ancak şu an bu hatayı almaktayım. Nasıl çözebilirim?
optirun glxgears
[ 849.400817] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[ 849.400889] [ERROR]Aborting because fallback start is disabled.
optirun -vvv glxgears
[ 386.031515] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 386.031903] [INFO]Configured driver: nvidia
[ 386.032103] [DEBUG]optirun version 3.2.1 starting...
[ 386.032139] [DEBUG]Active configuration:
[ 386.032154] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 386.032169] [DEBUG] X display: :8
[ 386.032184] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-340:/usr/lib32/nvidia-340
[ 386.032199] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 386.032215] [DEBUG] Accel/display bridge: auto
[ 386.032230] [DEBUG] VGL Compression: proxy
[ 386.032245] [DEBUG] VGLrun extra options:
[ 386.032261] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 386.032307] [DEBUG]Using auto-detected bridge virtualgl
[ 388.289966] [INFO]Response: No - error: [XORG] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[ 388.289999] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[ 388.290006] [DEBUG]Socket closed.
[ 388.290040] [ERROR]Aborting because fallback start is disabled.
[ 388.290051] [DEBUG]Killing all remaining processes.
cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-340
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-340:/usr/lib32/nvidia-340
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-340/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveaucat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
ii bumblebee 3.2.1-91~trustyppa1 amd64 NVIDIA Optimus support
ii bumblebee-nvidia 3.2.1-91~trustyppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
rc nvidia-331 340.76-0ubuntu0.1 amd64 Transitional package for nvidia-331
ii nvidia-340 340.76-0ubuntu0.1 amd64 NVIDIA binary driver - version 340.76
ii nvidia-340-uvm 340.76-0ubuntu0.1 amd64 Transitional package for nvidia-340
rc nvidia-346 346.72-0ubuntu1 amd64 NVIDIA binary driver - version 346.72
ii nvidia-libopencl1-340 340.76-0ubuntu0.1 amd64 NVIDIA OpenCL Driver and ICD Loader library
ii nvidia-opencl-icd-340 340.76-0ubuntu0.1 amd64 NVIDIA OpenCL ICD
ii nvidia-prime 0.6.2linuxmint1 amd64 Tools to enable NVIDIA's Prime
ii nvidia-prime-applet 1.0.3 all An applet for NVIDIA Prime
ii nvidia-settings 346.72-0ubuntu1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20150328-1~trustyppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20150328-1~trustyppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20150328-1~trustyppa1 i386 Shared libraries for primus
ii primus-libs-ia32 20150328-1~trustyppa1 i386 Shared libraries for primus (32-bit)
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 645M] (rev a1)
