mesela şuan capslock numlock crtl+a crtl+v gibi işlemleri kullanamıyorum normal kullanırken yazarken büyük yazamıyorum şuan yazım ihlali cezası yememek için söyledim ve alt+f4 ile tarayıcıyı kapatamıyorum eski klavyemde bu sorunlar yoktu ama klavyeyi değiştirince bu tür sorunlarla karşılaştım (klavye windowsta sorunsuz .
ocu@ocu-MS-7808 ~ $ inxi -Fxz
System: Host: ocu-MS-7808 Kernel: 3.16.0-51-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: Cinnamon 2.6.13 Distro: Linux Mint 17.2 Rafaela
Machine: Mobo: MSI model: B75MA-E31 (MS-7808) version: 1.0 Bios: American Megatrends version: V3.2 date: 09/30/2013
CPU: Dual core Intel Core i3-3250 CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 13969
Clock Speeds: 1: 3395.136 MHz 2: 3107.343 MHz 3: 3148.632 MHz 4: 2865.351 MHz
Graphics: Card: NVIDIA GM107 [GeForce GTX 750 Ti] bus-ID: 01:00.0 X.Org: 1.15.1 driver: nvidia Resolution: 1920x1080@59.9hz
GLX Renderer: GeForce GTX 750 Ti/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 352.63 Direct Rendering: Yes
Audio: Card-1: Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Card-2: NVIDIA Device 0fbc driver: snd_hda_intel bus-ID: 01:00.1
Sound: Advanced Linux Sound Architecture ver: k3.16.0-51-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: d000 bus-ID: 03:00.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1500.3GB (1.3% used) 1: id: /dev/sda model: ST1000VX000 size: 1000.2GB
2: id: /dev/sdb model: WDC_WD5000AAKX size: 500.1GB
Partition: ID: / size: 455G used: 19G (5%) fs: ext4 ID: swap-1 size: 4.24GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:31C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 190 Uptime: 2 min Memory: 710.5/3897.5MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11) inxi: 1.9.17
ocu@ocu-MS-7808 ~ $ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ USB Keyboard id=9 [slave pointer (2)]
⎜ ↳ USB Optical Mouse id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ USB Keyboard id=8 [slave keyboard (3)]
ocu@ocu-MS-7808 ~ $ cat ~/.dmrc
[Desktop]
Session=cinnamon
ocu@ocu-MS-7808 ~ $ locale
LANG=tr_TR.UTF-8
LANGUAGE=
LC_CTYPE="tr_TR.UTF-8"
LC_NUMERIC=en_US.UTF-8
LC_TIME="tr_TR.UTF-8"
LC_COLLATE="tr_TR.UTF-8"
LC_MONETARY=en_US.UTF-8
LC_MESSAGES="tr_TR.UTF-8"
LC_PAPER=en_US.UTF-8
LC_NAME=en_US.UTF-8
LC_ADDRESS=en_US.UTF-8
LC_TELEPHONE=en_US.UTF-8
LC_MEASUREMENT=en_US.UTF-8
LC_IDENTIFICATION=en_US.UTF-8
LC_ALL=
ocu@ocu-MS-7808 ~ $ cat /etc/default/keyboard
# Check /usr/share/doc/keyboard-configuration/README.Debian for
# documentation on what to do after having modified this file.
# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.
XKBMODEL="pc105"
XKBLAYOUT="tr"
XKBVARIANT=""
XKBOPTIONS=""
# If you don't want to use the XKB layout on the console, you can
# specify an alternative keymap. Make sure it will be accessible
# before /usr is mounted.
# KMAP=/etc/console-setup/defkeymap.kmap.gz
