[Nasıl] Linux Mint 18 - Intel + Nvidia Hibrit GPU İçin Bumblebee Kurulumu

[jaws61]

Şöyle diyeyim hocam. Ben dizüstünde genelde dosya transfer, müzik film izleme dinleme, internette gezinme gibi işlemler yaparım. O yüzden ekran kartını çok zorlayacak oyun çizim gibi işlemler yapmam. Bu yüzden bumblebee veya primus farketmez yeterki basit ve sorunsuz olsun. Windows un ağırlığından ve güncellemd gibi saçmalıklarından gına geldiği için cihazımda hep Mint ve Manjaro kurulu olmuştur. Bu arada linux mint kurulumundan sonra dikkatimi çeken fare imleci durmadan titriyor , yanıp-sönüyor ve ekranda iz bırakıyor. 

[Butterfly]

O zaman konuda anlatıldığı biçimde Bumblebee ile ilgili paketleri kaldırıp, ardından bu bölüm altındaki anlatımı uygulayarak Nvidia Prime kurulumu deneyin. Kurulum sonrasında Nvidia Ayar Yöneticinden Intel GPU'yu seçmeniz gerekecek, ayrıntılar Nvidia Prime kurulumu konusunda mevcut.

Fare imleci titremesi ile ilgili yeni konu açmalısınız.

[LimoniJedi]

Merhabalar, tüm adımları uyguladıktan sonra glxgears yazınca çarkları ekranda gördüm. Ancak optirun glxgears yazınca ekranda şu hatayı verdi

Kod: [Seç]

$ optirun glxgears
Error: couldn't get an RGB, Double-buffered visual

Kod: [Seç]

$ optirun -vvv glxgears
[  250.227456] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  250.227789] [INFO]Configured driver: nvidia
[  250.228052] [DEBUG]optirun version 3.2.1 starting...
[  250.228067] [DEBUG]Active configuration:
[  250.228072] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  250.228083] [DEBUG] X display: :8
[  250.228090] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-current:/usr/lib32/nvidia-381
[  250.228099] [DEBUG] Socket path: /var/run/bumblebee.socket
[  250.228104] [DEBUG] Accel/display bridge: auto
[  250.228112] [DEBUG] VGL Compression: proxy
[  250.228120] [DEBUG] VGLrun extra options:
[  250.228130] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  250.228190] [DEBUG]Using auto-detected bridge virtualgl
[  251.053362] [INFO]Response: Yes. X is active.

[  251.053379] [INFO]Running application using virtualgl.
[  251.053463] [DEBUG]Process vglrun started, PID 2712.
Error: couldn't get an RGB, Double-buffered visual
[  251.057815] [DEBUG]SIGCHILD received, but wait failed with No child processes
[  251.057833] [DEBUG]Socket closed.
[  251.057846] [DEBUG]Killing all remaining processes.


Kod: [Seç]

$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-381
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-381
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-381/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau


Kod: [Seç]

$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Kod: [Seç]

$ cat /etc/modprobe.d/bumblebee.conf
# This file is installed by bumblebee, do NOT edit!
# to be used by kmod / module-init-tools, and installed in /etc/modprobe.d/
# or equivalent

# do not automatically load nouveau as it may prevent nvidia from loading
blacklist nouveau
# do not automatically load nvidia as it's unloaded anyway when bumblebeed
# starts and may fail bumblebeed to disable the card in a race condition.
# Debian
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-legacy-304xx
blacklist nvidia-legacy-340xx
# Ubuntu
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-current-updates
# 304
blacklist nvidia-304
blacklist nvidia-304-updates
blacklist nvidia-experimental-304
# 310
blacklist nvidia-310
blacklist nvidia-310-updates
blacklist nvidia-experimental-310
# 313
blacklist nvidia-313
blacklist nvidia-313-updates
blacklist nvidia-experimental-313
# 319
blacklist nvidia-319
blacklist nvidia-319-updates
blacklist nvidia-experimental-319
# 325
blacklist nvidia-325
blacklist nvidia-325-updates
blacklist nvidia-experimental-325
# 331
blacklist nvidia-331
blacklist nvidia-331-updates
blacklist nvidia-experimental-331
# 334
blacklist nvidia-334
blacklist nvidia-334-updates
blacklist nvidia-experimental-334
# 337
blacklist nvidia-337
blacklist nvidia-337-updates
blacklist nvidia-experimental-337
# 340
blacklist nvidia-340
blacklist nvidia-340-updates
blacklist nvidia-experimental-340
# 343
blacklist nvidia-343
blacklist nvidia-343-updates
blacklist nvidia-experimental-343
# 346
blacklist nvidia-346
blacklist nvidia-346-updates
blacklist nvidia-experimental-346
# 349
blacklist nvidia-349
blacklist nvidia-349-updates
blacklist nvidia-experimental-349
# 352
blacklist nvidia-352
blacklist nvidia-352-updates
blacklist nvidia-experimental-352
# 355
blacklist nvidia-355
blacklist nvidia-355-updates
blacklist nvidia-experimental-355
# 358
blacklist nvidia-358
blacklist nvidia-358-updates
blacklist nvidia-experimental-358
# 361
blacklist nvidia-361
blacklist nvidia-361-updates
blacklist nvidia-experimental-361
# 364
blacklist nvidia-364
blacklist nvidia-364-updates
blacklist nvidia-experimental-364
# 367
blacklist nvidia-367
blacklist nvidia-367-updates
blacklist nvidia-experimental-367
# 375
blacklist nvidia-375
blacklist nvidia-375-updates
blacklist nvidia-experimental-375
# 378
blacklist nvidia-378
blacklist nvidia-378-updates
blacklist nvidia-experimental-378
# 381
blacklist nvidia-381
blacklist nvidia-381-updates
blacklist nvidia-experimental-381
# 384
blacklist nvidia-384
blacklist nvidia-384-updates
blacklist nvidia-experimental-384
# 381
blacklist nvidia-381
blacklist nvidia-381-updates
blacklist nvidia-experimental-381


Kod: [Seç]

$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok


Kod: [Seç]

$ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii  bumblebee                                   3.2.1-100~xenialppa1                         amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                            3.2.1-100~xenialppa1                         amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-381                                  381.22-0ubuntu0~gpu16.04.2                   amd64        NVIDIA binary driver - version 381.22
ii  nvidia-prime-applet                         1.0.6                                        all          An applet for NVIDIA Prime
ii  nvidia-settings                             387.22-0ubuntu0~gpu16.04.1                   amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                      20150328-3~xenialppa2                        amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                           20150328-3~xenialppa2                        amd64        Shared libraries for primus
ii  primus-libs:i386                            20150328-3~xenialppa2                        i386         Shared libraries for primus
ii  primus-libs-ia32:i386                       20150328-3~xenialppa2                        i386         Shared libraries for primus (32-bit)
ii  virtualgl                                   2.4.1-1~xenialppa1                           amd64        Toolkit for displaying OpenGL applications to thin clients
ii  virtualgl-libs:amd64                        2.4.1-1~xenialppa1                           amd64        Library files for virtualgl


Kod: [Seç]

$ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c8c (rev ff)


Kod: [Seç]

$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=114df884-9eb3-4b97-8416-9544e53d4e92 ro nogpumanager quiet splash vt.handoff=7

[Butterfly]

Aşağıdaki komutla VirtualGL ile ilgili paketleri silip yeniden deneyiniz.

Kod: [Seç]

sudo apt-get purge virtualgl*

[LimoniJedi]

Bu seferde aşağıdaki hatayı verdi

Kod: [Seç]

$ optirun glxgears
primus: fatal: failed to load any of the libraries: /usr/lib/nvidia-current/libGL.so.1:/usr/lib32/nvidia-381/libGL.so.1
/usr/lib/nvidia-current/libGL.so.1: cannot open shared object file: No such file or directory
/usr/lib32/nvidia-381/libGL.so.1: wrong ELF class: ELFCLASS32


[Butterfly]

LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-381

/etc/bumblebee/bumblebee.conf dosyasında düzeltilmesi gereken yerlerde hata var.

https://forum.linuxmint.net.tr/index.php?topic=6258.0#post_conf

[okanakinci]

Merhaba arkadaşlar.

Eskiden Nvidia Prime kullanırdım ama Meltdown ve Spectre açıkları nedeniyle Nvidia 340 sürücüsünü kullanmak istemedim. Nvidia 384 sürücüsü de yazılım yöneticisinden kurmakla hata veriyordu. (Bilgisayar açılmıyor, siyah ekranda kalıyordu) Ben de Bumblebee kurayım dedim ama Bumblebee'yi çalıştıramıyorum. [member=1429]erdem90[/member] arkadaşımızın aldığı hatanın aynısını alıyorum ama yapılandırma dosyasında bir hata yapmışım gibi görünmüyor. Ya hata başka yerde ya da hata bu dosyada ama ben göremedim. Buradaki mesajda önerilen çözüm de olmadı. Bir yerlerde hata yapıyorum ama nerede olduğunu bulamadım. Çıktıları paylaşayım.

Önce hatanın çıktısı:

Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ optirun glxgears
[ 1358.396722] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

[ 1358.396827] [ERROR]Aborting because fallback start is disabled.
Diğer çıktılar:

Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ optirun -vvv glxgears
[ 2115.181095] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 2115.181546] [INFO]Configured driver: nvidia
[ 2115.181782] [DEBUG]optirun version 3.2.1 starting...
[ 2115.181802] [DEBUG]Active configuration:
[ 2115.181810] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 2115.181818] [DEBUG] X display: :8
[ 2115.181824] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-384:/usr/lib32/nvidia-384
[ 2115.181846] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 2115.181865] [DEBUG] Accel/display bridge: auto
[ 2115.181886] [DEBUG] VGL Compression: proxy
[ 2115.181919] [DEBUG] VGLrun extra options:
[ 2115.181936] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 2115.182031] [DEBUG]Using auto-detected bridge virtualgl
[ 2115.428443] [INFO]Response: No - error: Could not enable discrete graphics card

[ 2115.428471] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

[ 2115.428489] [DEBUG]Socket closed.
[ 2115.428522] [ERROR]Aborting because fallback start is disabled.
[ 2115.428531] [DEBUG]Killing all remaining processes.


Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-384
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-384:/usr/lib32/nvidia-384
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-384/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau



Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:08:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection


Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ cat /etc/modprobe.d/bumblebee.conf
# This file is installed by bumblebee, do NOT edit!
# to be used by kmod / module-init-tools, and installed in /etc/modprobe.d/
# or equivalent

# do not automatically load nouveau as it may prevent nvidia from loading
blacklist nouveau
# do not automatically load nvidia as it's unloaded anyway when bumblebeed
# starts and may fail bumblebeed to disable the card in a race condition.
# Debian
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-legacy-304xx
blacklist nvidia-legacy-340xx
# Ubuntu
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-current-updates
# 304
blacklist nvidia-304
blacklist nvidia-304-updates
blacklist nvidia-experimental-304
# 310
blacklist nvidia-310
blacklist nvidia-310-updates
blacklist nvidia-experimental-310
# 313
blacklist nvidia-313
blacklist nvidia-313-updates
blacklist nvidia-experimental-313
# 319
blacklist nvidia-319
blacklist nvidia-319-updates
blacklist nvidia-experimental-319
# 325
blacklist nvidia-325
blacklist nvidia-325-updates
blacklist nvidia-experimental-325
# 331
blacklist nvidia-331
blacklist nvidia-331-updates
blacklist nvidia-experimental-331
# 334
blacklist nvidia-334
blacklist nvidia-334-updates
blacklist nvidia-experimental-334
# 337
blacklist nvidia-337
blacklist nvidia-337-updates
blacklist nvidia-experimental-337
# 340
blacklist nvidia-340
blacklist nvidia-340-updates
blacklist nvidia-experimental-340
# 343
blacklist nvidia-343
blacklist nvidia-343-updates
blacklist nvidia-experimental-343
# 346
blacklist nvidia-346
blacklist nvidia-346-updates
blacklist nvidia-experimental-346
# 349
blacklist nvidia-349
blacklist nvidia-349-updates
blacklist nvidia-experimental-349
# 352
blacklist nvidia-352
blacklist nvidia-352-updates
blacklist nvidia-experimental-352
# 355
blacklist nvidia-355
blacklist nvidia-355-updates
blacklist nvidia-experimental-355
# 358
blacklist nvidia-358
blacklist nvidia-358-updates
blacklist nvidia-experimental-358
# 361
blacklist nvidia-361
blacklist nvidia-361-updates
blacklist nvidia-experimental-361
# 364
blacklist nvidia-364
blacklist nvidia-364-updates
blacklist nvidia-experimental-364
# 367
blacklist nvidia-367
blacklist nvidia-367-updates
blacklist nvidia-experimental-367
# 375
blacklist nvidia-375
blacklist nvidia-375-updates
blacklist nvidia-experimental-375
# 378
blacklist nvidia-378
blacklist nvidia-378-updates
blacklist nvidia-experimental-378
# 381
blacklist nvidia-381
blacklist nvidia-381-updates
blacklist nvidia-experimental-381
# 384
blacklist nvidia-384
blacklist nvidia-384-updates
blacklist nvidia-experimental-384
# 384 karaliste
blacklist nvidia-384
blacklist nvidia-384-updates
blacklist nvidia-experimental-384


Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok


Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii  bumblebee                             3.2.1-100~xenialppa1                         amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                      3.2.1-100~xenialppa1                         amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-384                            384.111-0ubuntu0.16.04.1                     amd64        NVIDIA binary driver - version 384.111
ii  nvidia-prime-applet                   1.0.6                                        all          An applet for NVIDIA Prime
ii  nvidia-settings                       390.25-0ubuntu0~gpu16.04.1                   amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                20150328-3~xenialppa2                        amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                     20150328-3~xenialppa2                        amd64        Shared libraries for primus
ii  primus-libs:i386                      20150328-3~xenialppa2                        i386         Shared libraries for primus
ii  primus-libs-ia32:i386                 20150328-3~xenialppa2                        i386         Shared libraries for primus (32-bit)
ii  virtualgl                             2.4.1-1~xenialppa1                           amd64        Toolkit for displaying OpenGL applications to thin clients
ii  virtualgl-libs:amd64                  2.4.1-1~xenialppa1                           amd64        Library files for virtualgl


Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
08:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev ff)


Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=faf34f69-4bc2-48d7-bcd7-eaffcc520285 ro nogpumanager quiet splash vt.handoff=7


[Butterfly]

Response: No - error: Could not enable discrete graphics card

TLP kurulu mu?

Kod: [Seç]

dpkg -l | grep tlp

[okanakinci]

TLP kurulu değil, ben onun yerine laptop-mode-tools kullanıyordum. Çıktıda da bir şey gelmiyor zaten.

Kod: [Seç]

okan[member=234]okan[/member]-Inspiron-3542 ~ $ dpkg -l | grep tlp
okan[member=234]okan[/member]-Inspiron-3542 ~ $ Mesajlar Birleştirildi.Şimdi laptop-mode-tools paketini kaldırıp tlp paketini kurdum ve bilgisayarı yeniden başlattım. Tekrar denedim, işe yaradı. Bumblebee çalışıyor şu an. Çok teşekkür ederim.

[Butterfly]

    BusID "PCI:08:00:0"

Bumblebee güç yönetimi uygulamalarıyla çakışabiliyor. TLP'nin kurulu olup olmadığını sormadaki maksat böyle bir çakışma olup olmadığını anlamaktı. Sizin sistemde bu çakışma laptop-mode-tools nedeniyle olmuş. Eğer Bumblebee'de TLP kaynaklı bir sorun olursa, GPU'nun BUSID değerini TLP varsayılan dosyasına karaliste olarak eklemek gerekecek.

Bunun için aşağıdaki komutla tlp varsayılan dosyasını açıp,

Kod: [Seç]

sudo xed /etc/default/tlp
aşağıdaki satırı dosyanın en altına eklemeyi deneyeceksiniz. Ardından sistemi ya da TLP servisini yeniden başlatmalısınız.

Kod: [Seç]

RUNTIME_PM_BLACKLIST="08:00:0"
Aygıtın BUSID değeri /etc/bumblebee/bumblebee.conf dosyasından ya da lspci | egrep 'VGA|3D|Display' komutunun çıktısından öğrenilebilir.

[okanakinci]

[member=8]Butterfly[/member] bu çakışmayı laptop-mode-tools paketinde de önleyebilir miyiz? Ben TLP yerine onu kullanmak istiyorum.

[Butterfly]

bu çakışmayı laptop-mode-tools paketinde de önleyebilir miyiz?

Nasıl yapılacağı ile ilgili bir bilgim yok.

Ama Nvidia-390 sürücüsü ve laptop-mode-tools bir arada denedim, herhangi bir sorun yaşamadım. Bumblebee için Nvidia sürücüsü güncellemesi için konumuz mevcut.

[okanakinci]

Teşekkür ederim. Öyleyse ben Nvidia sürücüsünü güncelleyeyim.

[okanakinci]

Indicator konusunda bir şey keşfettim. Bu rehberde belirtilen indicator dışında Cinnamon'un uygulamacık mağazasında da bir tane var. Onun kurulumu daha zahmetsiz. Panele eklediğinizde Intel logosu görünüyor. Bumblebee çalıştığında ise Nvidia logosu görünüyor. Uygulamacığın ismi "Bumblebee Status with NVidia Temperature Display".

[Butterfly]

Bu uygulamacık sadece hangi GPU'nun kullanıldığını gösteriyor. Bunun benzeri MATE için de var, depodan mate-optimus paketi kurulup panele eklenebilir.