optirun -vvv glxgears
[ 1105.307348] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1105.307910] [INFO]Configured driver: nvidia
[ 1105.308201] [DEBUG]optirun version 3.2.1 starting...
[ 1105.308214] [DEBUG]Active configuration:
[ 1105.308218] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1105.308222] [DEBUG] X display: :8
[ 1105.308226] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-378:/usr/lib32/nvidia-378
[ 1105.308231] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1105.308235] [DEBUG] Accel/display bridge: auto
[ 1105.308239] [DEBUG] VGL Compression: proxy
[ 1105.308242] [DEBUG] VGLrun extra options:
[ 1105.308249] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1105.308348] [DEBUG]Using auto-detected bridge virtualgl
[ 1105.309114] [INFO]Response: Yes. X is active.
[ 1105.309142] [INFO]Running application using virtualgl.
[ 1105.309301] [DEBUG]Process vglrun started, PID 3778.
4580 frames in 5.0 seconds = 915.826 FPS
4727 frames in 5.0 seconds = 945.373 FPS
4563 frames in 5.0 seconds = 912.588 FPS
4676 frames in 5.0 seconds = 935.029 FPS
cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-378
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-378:/usr/lib32/nvidia-378
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-378/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii bumblebee 3.2.1-96~xenialppa1 amd64 NVIDIA Optimus support for Linux
ii bumblebee-nvidia 3.2.1-96~xenialppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-378 378.09-0ubuntu0~gpu16.04.1 amd64 NVIDIA binary driver - version 378.09
ii nvidia-settings 378.09-0ubuntu0~gpu16.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20150328-3~xenialppa1 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20150328-3~xenialppa1 amd64 Shared libraries for primus
ii primus-libs:i386 20150328-3~xenialppa1 i386 Shared libraries for primus
ii primus-libs-ia32:i386 20150328-3~xenialppa1 i386 Shared libraries for primus (32-bit)
ii virtualgl 2.4.1-1~xenialppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.4.1-1~xenialppa1 amd64 Library files for virtualgl
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1
glxspheres64
Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
Visual ID of window: 0xa7
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile
60.643920 frames/sec - 53.766899 Mpixels/sec
60.139711 frames/sec - 53.319868 Mpixels/sec
60.200069 frames/sec - 53.373381 Mpixels/sec
optirun glxspheres64
Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: GeForce GT 540M/PCIe/SSE2
179.555617 frames/sec - 159.194010 Mpixels/sec
178.204756 frames/sec - 157.996336 Mpixels/sec
vblank_mode=0 glxspheres64
Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
Visual ID of window: 0xa7
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile
179.991804 frames/sec - 159.580733 Mpixels/sec
162.924387 frames/sec - 144.448762 Mpixels/sec
vblank_mode=0 optirun glxspheres64
Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: GeForce GT 540M/PCIe/SSE2
184.669257 frames/sec - 163.727764 Mpixels/sec
182.090045 frames/sec - 161.441034 Mpixels/sec
187.027404 frames/sec - 165.818497 Mpixels/sec
181.691074 frames/sec - 161.087306 Mpixels/sec
Cs:Go gelişmiş açılış seçeneklerinde vblank_mode=0 optirun -b primus %command% kodu girili
Öncelikle merhabalar. Forumda girip çıkmadığım kontrol etmediğim konu kalmadı benim sorunuma yakın sorunları olan arkadaşları inceledim fakat olmuyor. Cs:Go'ya hala girmeye çalıştığım zaman OpenGL ile açılıyor oyun ve max 118 fps offline modda ve max 40 fps online modda alıyorum bu sizce normal mi.? Nvidia ile oyuna neden giremiyorum? yani primusrun kodu ile 945 fps alabilirken oyuna girince bu kadar düşmesi normalmidir acaba? Birisi yardımcı olursa cidden çok mutlu olurum.
