Intel + Nvidia Hibrit Sistem'de Fan ve Performans Problemi

[emreshepherd]

Merhaba,

Daha önce şu konuda https://forum.linuxmint.net.tr/index.php?topic=9465.0 uzun uğraşlar sonucu ekran kartı sürücüsü, fanın sürekli çalışması ve pilin çabuk bitmesi gibi problemleri bir şekilde çözdük ya da çözdüğümüzü düşünüyorum. Fakat istediğim performansı alamıyorum. Daha önce Windows kullanıcısıydım ve hiç böyle sorunlar yaşamamıştım. (Tarayıcı da gezinirken kilitlenme, akıcılığın olmaması vb.) Linux Mint'i kurmadan önce Manjaro denemiştim onda daha kötüydü durum. Bunda en azından şu belirttiğim konudaki talimatları uygularak biraz daha iyileştirdim fakat Chrome tarayıcıda 5 sekme açmaya gelmiyor. Açmasına açıyorda, akıcı değil. Bir sayfada veri girişi yaparken, diğer sekme yenilenirken vs. tıkanma söz konusu. Heralde böyle bir bilgisayarı kimse kullanmak istemez. O konuda belirtildiği üzere "yırtılma" sorunun giderildiğini düşünmüştüm fakat pekte gitmiş gibi görünmüyor hala siyah karartı gibi yenilenmeler görüyorum (adres çubuğu ve yer işaretlerinin olduğu kısımda zaman zaman). Bunun dışında şarjdayken fan sabit hızda sürekli çalışıyor. Normalde böyle olmamalıydı. En azından Windows'da böyle değildi, duruma göre hızlanabilir tabii yine.

1. Genel olarak işletim sistemini kullanırken akıcılık yok.
2. Şarjdayken fanın sürekli çalışması.

Bilgi: TLP ve Bumblebee kurulu ve ayarları tamam. Yırtılmayle ilgili birkaç komut işlemi yapıldı ve efektlerdeki akıcılık düzelmişti (hala düzgün).

Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ inxi -Fxxz
System:    Host: emreshepherd Kernel: 4.15.0-33-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: Cinnamon 3.8.8 (Gtk 3.22.30-1ubuntu1) dm: lightdm
           Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: MONSTER product: ABRA A5 V6.2 serial: N/A
           Mobo: MONSTER model: ABRA A5 V6.2 serial: N/A
           UEFI: American Megatrends v: 5.11 date: 06/16/2016
           Chassis: type: 10 serial: N/A
Battery    BAT0: charge: 37.3 Wh 100.0% condition: 37.3/46.7 Wh (80%) volts: 12.8/11.4
           model: Notebook BAT serial: <filter>status: Full
CPU:       Quad core Intel Core i7-6700HQ (-MT-MCP-)
           arch: Skylake-S rev.3 cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20736
           clock speeds: min/max: 2400/2601 MHz 1: 800 MHz 2: 800 MHz 3: 800 MHz
           4: 800 MHz 5: 800 MHz 6: 800 MHz 7: 800 MHz 8: 800 MHz
Graphics:  Card-1: Intel HD Graphics 530 bus-ID: 00:02.0 chip-ID: 8086:191b
           Card-2: NVIDIA GM107M [GeForce GTX 950M] bus-ID: 01:00.0 chip-ID: 10de:139a
           Display Server: x11 (X.Org 1.19.6 ) driver: intel
           Resolution: 1920x1080@60.02hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
           version: 4.5 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio:     Card Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
           Sound: Advanced Linux Sound Architecture v: k4.15.0-33-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 02:00.1 chip-ID: 10ec:8168
           IF: enp2s0f1 state: down mac: <filter>
           Card-2: Intel Wireless 3165
           driver: iwlwifi bus-ID: 03:00.0 chip-ID: 8086:3165
           IF: wlp3s0 state: up mac: <filter>
Drives:    HDD Total Size: 240.1GB (10.3% used)
           ID-1: /dev/sda model: ADATA_SP550NS38 size: 240.1GB serial: <filter>
Partition: ID-1: / size: 219G used: 24G (12%) fs: ext4 dev: /dev/sda2
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   System Temperatures: cpu: 40.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 256 Uptime: 1:47 Memory: 2263.4/7862.1MB
           Init: systemd v: 237 runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191 running in gnome-terminal-) inxi: 2.3.56

Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ inxi -SMGxx
System:    Host: emreshepherd Kernel: 4.15.0-33-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: Cinnamon 3.8.8 (Gtk 3.22.30-1ubuntu1) dm: lightdm
           Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: MONSTER product: ABRA A5 V6.2 serial: N/A
           Mobo: MONSTER model: ABRA A5 V6.2 serial: N/A
           UEFI: American Megatrends v: 5.11 date: 06/16/2016
           Chassis: type: 10 serial: N/A
Graphics:  Card-1: Intel HD Graphics 530 bus-ID: 00:02.0 chip-ID: 8086:191b
           Card-2: NVIDIA GM107M [GeForce GTX 950M] bus-ID: 01:00.0 chip-ID: 10de:139a
           Display Server: x11 (X.Org 1.19.6 ) driver: intel
           Resolution: 1920x1080@60.02hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
           version: 4.5 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes


Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ glxinfo | grep render
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 530 (Skylake GT2)
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_conditional_render,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,

Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev ff)


Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
   1920x1080     60.02*+  59.93 
   1680x1050     59.88 
   1600x1024     60.17 
   1400x1050     59.98 
   1600x900      60.00    59.95    59.82 
   1280x1024     60.02 
   1440x900      59.89 
   1400x900      59.96    59.88 
   1280x960      60.00 
   1368x768      60.00    59.88    59.85 
   1360x768      59.80    59.96 
   1280x800      59.81    59.91 
   1152x864      60.00 
   1280x720      59.86    60.00    59.74 
   1024x768      60.00 
   1024x576      60.00    59.90    59.82 
   960x540       60.00    59.63    59.82 
   800x600       60.32    56.25 
   864x486       60.00    59.92    59.57 
   640x480       59.94 
   720x405       59.51    60.00    58.99 
   640x360       59.84    59.32    60.00 
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)


Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok


Kod: [Seç]

emre[member=5259]emreshepherd[/member]:~$ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl|fglrx'
ii  bumblebee                                                   3.2.1-17                            amd64        NVIDIA Optimus support for Linux
ii  libnvidia-cfg1-390:amd64                                    390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA binary OpenGL/GLX configuration library
ii  libnvidia-common-390                                        390.48-0ubuntu3                     all          Shared files used by the NVIDIA libraries
ii  libnvidia-compute-390:amd64                                 390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA libcompute package
ii  libnvidia-compute-390:i386                                  390.87-0ubuntu0~gpu18.04.1          i386         NVIDIA libcompute package
ii  libnvidia-decode-390:amd64                                  390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA Video Decoding runtime libraries
ii  libnvidia-decode-390:i386                                   390.87-0ubuntu0~gpu18.04.1          i386         NVIDIA Video Decoding runtime libraries
ii  libnvidia-encode-390:amd64                                  390.87-0ubuntu0~gpu18.04.1          amd64        NVENC Video Encoding runtime library
ii  libnvidia-encode-390:i386                                   390.87-0ubuntu0~gpu18.04.1          i386         NVENC Video Encoding runtime library
ii  libnvidia-fbc1-390:amd64                                    390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA OpenGL-based Framebuffer Capture runtime library
ii  libnvidia-fbc1-390:i386                                     390.87-0ubuntu0~gpu18.04.1          i386         NVIDIA OpenGL-based Framebuffer Capture runtime library
ii  libnvidia-gl-390:amd64                                      390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii  libnvidia-gl-390:i386                                       390.87-0ubuntu0~gpu18.04.1          i386         NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii  libnvidia-ifr1-390:amd64                                    390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA OpenGL-based Inband Frame Readback runtime library
ii  libnvidia-ifr1-390:i386                                     390.87-0ubuntu0~gpu18.04.1          i386         NVIDIA OpenGL-based Inband Frame Readback runtime library
ii  nvidia-390                                                  390.87-0ubuntu0~gpu18.04.1          amd64        Transitional package for nvidia-driver-390
ii  nvidia-compute-utils-390                                    390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA compute utilities
ii  nvidia-dkms-390                                             390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA DKMS package
ii  nvidia-driver-390                                           390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA driver metapackage
ii  nvidia-kernel-common-390                                    390.87-0ubuntu0~gpu18.04.1          amd64        Shared files used with the kernel module
ii  nvidia-kernel-source-390                                    390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA kernel source package
ii  nvidia-utils-390                                            390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA driver support binaries
ii  primus                                                      0~20150328-6                        amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                                           0~20150328-6                        amd64        Shared libraries for primus
ii  primus-libs:i386                                            0~20150328-6                        i386         Shared libraries for primus
ii  primus-libs-ia32:i386                                       0~20150328-6                        i386         Shared libraries for primus (32-bit)
ii  xserver-xorg-video-nvidia-390                               390.87-0ubuntu0~gpu18.04.1          amd64        NVIDIA binary Xorg driver


[Butterfly]

Aşağıdaki komutların çıktılarını fişe takılıyken paylaşınız.

Kod: [Seç]

inxi -Fxxz
lsmod
sudo tlp-stat
cat /etc/environment

Fişe takılıyken sistem performansı iyileşiyor mu?

[emreshepherd]

Sorunlar fişe takılıyken meydana geldi.

Kod: [Seç]

System:    Host: emreshepherd Kernel: 4.15.0-33-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: Cinnamon 3.8.8 (Gtk 3.22.30-1ubuntu1) dm: lightdm
           Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: MONSTER product: ABRA A5 V6.2 serial: N/A
           Mobo: MONSTER model: ABRA A5 V6.2 serial: N/A
           UEFI: American Megatrends v: 5.11 date: 06/16/2016
           Chassis: type: 10 serial: N/A
Battery    BAT0: charge: 37.3 Wh 100.0% condition: 37.3/46.7 Wh (80%) volts: 12.8/11.4
           model: Notebook BAT serial: <filter>status: Full
CPU:       Quad core Intel Core i7-6700HQ (-MT-MCP-)
           arch: Skylake-S rev.3 cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20736
           clock speeds: min/max: 2400/2601 MHz 1: 800 MHz 2: 799 MHz 3: 800 MHz
           4: 800 MHz 5: 800 MHz 6: 800 MHz 7: 800 MHz 8: 800 MHz
Graphics:  Card-1: Intel HD Graphics 530 bus-ID: 00:02.0 chip-ID: 8086:191b
           Card-2: NVIDIA GM107M [GeForce GTX 950M] bus-ID: 01:00.0 chip-ID: 10de:139a
           Display Server: x11 (X.Org 1.19.6 ) driver: intel
           Resolution: 1920x1080@60.02hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
           version: 4.5 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio:     Card Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
           Sound: Advanced Linux Sound Architecture v: k4.15.0-33-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 02:00.1 chip-ID: 10ec:8168
           IF: enp2s0f1 state: down mac: <filter>
           Card-2: Intel Wireless 3165
           driver: iwlwifi bus-ID: 03:00.0 chip-ID: 8086:3165
           IF: wlp3s0 state: up mac: <filter>
Drives:    HDD Total Size: 240.1GB (10.3% used)
           ID-1: /dev/sda model: ADATA_SP550NS38 size: 240.1GB serial: <filter>
Partition: ID-1: / size: 219G used: 24G (12%) fs: ext4 dev: /dev/sda2
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   System Temperatures: cpu: 42.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 267 Uptime: 4:05 Memory: 3584.2/7862.1MB
           Init: systemd v: 237 runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191 running in gnome-terminal-) inxi: 2.3.56

Kod: [Seç]

Module                  Size  Used by
msr                    16384  0
cmac                   16384  0
rfcomm                 77824  0
bnep                   20480  0
uvcvideo               86016  0
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
btusb                  45056  0
videobuf2_v4l2         24576  1 uvcvideo
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
videobuf2_core         40960  2 uvcvideo,videobuf2_v4l2
btintel                16384  1 btusb
videodev              184320  3 uvcvideo,videobuf2_core,videobuf2_v4l2
bluetooth             548864  9 btrtl,btintel,bnep,btbcm,rfcomm,btusb
media                  40960  2 uvcvideo,videodev
ecdh_generic           24576  1 bluetooth
bbswitch               16384  0
snd_hda_codec_hdmi     49152  1
arc4                   16384  2
snd_hda_codec_realtek   106496  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_intel          40960  5
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
nls_iso8859_1          16384  1
snd_hwdep              20480  1 snd_hda_codec
snd_pcm                98304  5 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
mxm_wmi                16384  0
kvm_intel             212992  0
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
kvm                   593920  1 kvm_intel
iwlmvm                364544  0
snd_rawmidi            32768  1 snd_seq_midi
irqbypass              16384  1 kvm
mac80211              778240  1 iwlmvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
ghash_clmulni_intel    16384  0
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
pcbc                   16384  0
snd_timer              32768  2 snd_seq,snd_pcm
aesni_intel           188416  0
iwlwifi               282624  1 iwlmvm
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
glue_helper            16384  1 aesni_intel
snd                    81920  20 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
joydev                 24576  0
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
input_leds             16384  0
rtsx_pci_ms            20480  0
intel_cstate           20480  0
cfg80211              622592  3 iwlmvm,iwlwifi,mac80211
soundcore              16384  1 snd
memstick               16384  1 rtsx_pci_ms
serio_raw              16384  0
intel_rapl_perf        16384  0
mei_me                 40960  0
shpchp                 36864  0
mei                    90112  1 mei_me
tpm_crb                16384  0
acpi_pad              180224  0
wmi                    24576  1 mxm_wmi
mac_hid                16384  0
sch_fq_codel           20480  6
parport_pc             36864  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,parport_pc,ppdev
ip_tables              28672  0
x_tables               40960  1 ip_tables
autofs4                40960  2
btrfs                1122304  0
xor                    24576  1 btrfs
zstd_compress         163840  1 btrfs
raid6_pq              114688  1 btrfs
dm_mirror              24576  0
dm_region_hash         20480  1 dm_mirror
dm_log                 20480  2 dm_mirror,dm_region_hash
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  3 hid_generic,usbhid
i915                 1617920  5
i2c_algo_bit           16384  1 i915
rtsx_pci_sdmmc         24576  0
drm_kms_helper        172032  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   401408  6 i915,drm_kms_helper
psmouse               147456  0
r8169                  86016  0
ahci                   36864  2
rtsx_pci               65536  2 rtsx_pci_sdmmc,rtsx_pci_ms
mii                    16384  1 r8169
libahci                32768  1 ahci
video                  45056  1 i915


Kod: [Seç]

--- TLP 1.1 --------------------------------------------

+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=BAT
TLP_PERSISTENT_DEFAULT=0
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
CPU_SCALING_GOVERNOR_ON_AC=ondemand
CPU_SCALING_GOVERNOR_ON_BAT=powersave
CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power
CPU_MIN_PERF_ON_AC=0
CPU_MAX_PERF_ON_AC=90
CPU_MIN_PERF_ON_BAT=0
CPU_MAX_PERF_ON_BAT=30
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=power
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
AHCI_RUNTIME_PM_TIMEOUT=15
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_AC=0
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
USB_AUTOSUSPEND=1
USB_BLACKLIST_BTUSB=0
USB_BLACKLIST_PHONE=0
USB_BLACKLIST_PRINTER=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0

+++ System Info
System         = MONSTER Not Applicable                   ABRA A5 V6.2
BIOS           = 5.11
Release        = Linux Mint 19 Tara
Kernel         = 4.15.0-33-generic #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=8f38e6f7-34f3-4c7e-9b36-2d26e82460c0 ro nogpumanager acpi_osi=! "acpi_osi=Windows 2009" quiet splash intel_pstate=disable vt.handoff=1
Init system    = systemd v237
Boot mode      = UEFI

+++ TLP Status
State          = enabled
Last run       = 15:28:11,  14532 sec(s) ago
Mode           = battery
Power source   = AC

+++ Processor
CPU model      = Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu4/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu4/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu4/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu4/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu5/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu5/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu5/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu5/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu5/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu5/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu6/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu6/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu6/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu6/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu6/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu6/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu7/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu7/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu7/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu7/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu7/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu7/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpufreq/boost                  = 1

x86_energy_perf_policy: program not installed.

/sys/module/workqueue/parameters/power_efficient       = Y
/proc/sys/kernel/nmi_watchdog                          = 0

+++ Undervolting
PHC kernel not available.

+++ Temperatures
CPU temp               =    44 [°C]
Fan speed              = (not available)

+++ File System
/proc/sys/vm/laptop_mode               =     2
/proc/sys/vm/dirty_writeback_centisecs =  6000
/proc/sys/vm/dirty_expire_centisecs    =  6000
/proc/sys/vm/dirty_ratio               =    20
/proc/sys/vm/dirty_background_ratio    =    10

+++ Storage Devices
/dev/sda:
  Model     = ADATA SP550NS38                         
  Firmware  = P0414B 
  APM Level = none/disabled
  Status    = active/idle
  TRIM      = supported
  Scheduler = cfq

  Runtime PM: control = on, autosuspend_delay =   -1


+++ AHCI Link Power Management (ALPM)
/sys/class/scsi_host/host0/link_power_management_policy  = med_power_with_dipm
/sys/class/scsi_host/host1/link_power_management_policy  = med_power_with_dipm
/sys/class/scsi_host/host2/link_power_management_policy  = med_power_with_dipm

+++ AHCI Host Controller Runtime Power Management
/sys/bus/pci/devices/0000:00:17.0/ata1/power/control = on
/sys/bus/pci/devices/0000:00:17.0/ata2/power/control = on
/sys/bus/pci/devices/0000:00:17.0/ata3/power/control = on

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)

+++ Intel Graphics
/sys/module/i915/parameters/enable_rc6       =  1 (enabled)
/sys/module/i915/parameters/enable_dc        = -1 (use per-chip default)
/sys/module/i915/parameters/enable_fbc       =  1 (enabled)
/sys/module/i915/parameters/enable_psr       =  0 (disabled)
/sys/module/i915/parameters/modeset          = -1 (use per-chip default)
/sys/module/i915/parameters/semaphores       =  0 (disabled)

+++ Wireless
bluetooth = on
wifi      = on
wwan      = none (no device)

hci0(btusb)                   : bluetooth, not connected
wlp3s0(iwlwifi)               : wifi, connected, power management = on

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y

+++ Runtime Power Management
Device blacklist = (not configured)
Driver blacklist = amdgpu nouveau nvidia radeon (default)

/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, skl_uncore)
/sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:00:16.0/power/control = auto (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:17.0/power/control = auto (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.5/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.2/power/control = auto (0x058000, Memory controller, no driver)
/sys/bus/pci/devices/0000:00:1f.3/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1f.4/power/control = auto (0x0c0500, SMBus, no driver)
/sys/bus/pci/devices/0000:01:00.0/power/control = on   (0x030200, 3D controller, no driver)
/sys/bus/pci/devices/0000:02:00.0/power/control = auto (0xff0000, Unassigned class [ff00], rtsx_pci)
/sys/bus/pci/devices/0000:02:00.1/power/control = auto (0x020000, Ethernet controller, r8169)
/sys/bus/pci/devices/0000:03:00.0/power/control = auto (0x028000, Network controller, iwlwifi)

+++ USB
Autosuspend         = enabled
Device whitelist    = (not configured)
Device blacklist    = (not configured)
Bluetooth blacklist = disabled
Phone blacklist     = disabled
WWAN blacklist      = enabled

Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 3.0 root hub (hub)
Bus 001 Device 004 ID 8087:0a2a control = auto, autosuspend_delay_ms =  2000 -- Intel Corp.  (btusb)
Bus 001 Device 003 ID 04f2:b59e control = auto, autosuspend_delay_ms =  2000 -- Chicony Electronics Co., Ltd  (uvcvideo)
Bus 001 Device 002 ID 046d:c52f control = on,   autosuspend_delay_ms =  2000 -- Logitech, Inc. Unifying Receiver (usbhid)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)

+++ Battery Status
/sys/class/power_supply/BAT0/manufacturer                   = Notebook
/sys/class/power_supply/BAT0/model_name                     = BAT
/sys/class/power_supply/BAT0/cycle_count                    = (not supported)
/sys/class/power_supply/BAT0/charge_full_design             =   4100 [mAh]
/sys/class/power_supply/BAT0/charge_full                    =   3270 [mAh]
/sys/class/power_supply/BAT0/charge_now                     =   3270 [mAh]
/sys/class/power_supply/BAT0/current_now                    =      0 [mA]
/sys/class/power_supply/BAT0/status                         = Full

Charge                                                      =  100.0 [%]
Capacity                                                    =   79.8 [%]

+++ Suggestions
* Install smartmontools for disk drive health info


Kod: [Seç]

PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
__GLVND_DISALLOW_PATCHING=1
CLUTTER_PAINT=disable-clipped-redraws:disable-culling
CLUTTER_VBLANK=True


[Butterfly]

Performans sorunu fişe takılıyken mi oluyor?

Fan sorunu için, eğer kuruluysa lm-sensors paketini aşağıdaki komutla kaldırıp, sistemi yeniden başlatmayı deneyiniz.

Kod: [Seç]

sudo apt purge lm-sensors

[emreshepherd]

Evet, bu dediklerimi fişe takılıyken yaşadım. Bir web sayfası içinde kutucuğa yazı yazarken, pencereyi küçültüp büyültürken, youtube gibi bir sitenin açılışı ya da sayfalardaki resimlerin geç gelmesi gibi problemler -sürekli değil ama sık sık sayfaya göre değişiklik gösteriyor sanırım-. Akıcılık normal değil ve Chrome'da yırtılmalar mevcut. lm-sensors paketini kurmamıştım ama yine de dediğiniz gibi yaptım.

[Butterfly]

Bu sorunun olduğu esnada Bumblebee'yi mi kullanıyorsunuz? Yani harici GPU ile çalışan bir uygulama mı mevcut?

[emreshepherd]

Sadece Bumblebee ve TLP kurulu. Bunun dışında sürücülerle ilgili olarak farklı bir paket kurulumu yapmadım. Ubuntu'ya mı geçmeli miyim ya da Xfce'mi denesem. Farklılık olabilir mi bilmiyorum. Deneyebileceğimiz başka bir yöntem yok galiba. Tek emin olduğum, Windows kadar akıcı bir kullanım yok.

[Butterfly]

Şunu demek istiyorum, performans sorunu fişe takılıyken ve  Nvidia GPU ile bir uygulama açıkken mi oluyor?  Şu an için fan sorunundan bahsetmiyorum.

[emreshepherd]

Hayır, nVidia GPU kullanarak aç dediğim bir uygulama olmadı. Sadece Chrome'u normal bir şekilde açıyorum ve web sayfalarında gezinirken yırtılma gibi problemler oluşuyor. Bunun dışında başka bir uygulama açık değil.

[Butterfly]

Aşağıdaki komutların çıktılarına bakalım.

Kod: [Seç]

cat /proc/cmdline
cat /etc/default/tlp
lspci | egrep 'VGA|3D|Display'


[emreshepherd]

Çıktılar:

Kod: [Seç]

BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=8f38e6f7-34f3-4c7e-9b36-2d26e82460c0 ro nogpumanager acpi_osi=! "acpi_osi=Windows 2009" quiet splash intel_pstate=disable vt.handoff=1


Kod: [Seç]

# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html

# Hint: some features are disabled by default, remove the leading # to enable
# them.

# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1

# Operation mode when no power supply can be detected: AC, BAT.
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=BAT

# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
TLP_PERSISTENT_DEFAULT=0

# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2

# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60

# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.

# Select a CPU frequency scaling governor.
# Intel Core i processor with intel_pstate driver:
#   powersave(*), performance.
# Older hardware with acpi-cpufreq driver:
#   ondemand(*), powersave, performance, conservative, schedutil.
# (*) is recommended.
# Hint: use tlp-stat -p to show the active driver and available governors.
# Important:
#   powersave for intel_pstate and ondemand for acpi-cpufreq are power
#   efficient for *almost all* workloads and therefore kernel and most
#   distributions have chosen them as defaults. If you still want to change,
#   you should know what you're doing! You *must* disable your distribution's
#   governor settings or conflicts will occur.
CPU_SCALING_GOVERNOR_ON_AC=ondemand
CPU_SCALING_GOVERNOR_ON_BAT=powersave

# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# the output of tlp-stat -p.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0

# Set energy performance hints (HWP) for Intel P-state governor:
#   performance, balance_performance, default, balance_power, power
# Values are given in order of increasing power saving.
# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power

# Set Intel P-state performance: 0..100 (%).
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
CPU_MIN_PERF_ON_AC=0
CPU_MAX_PERF_ON_AC=90
CPU_MIN_PERF_ON_BAT=0
CPU_MAX_PERF_ON_BAT=30

# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0

# Minimize number of used CPU cores/hyper-threads under light load conditions:
#   0=disable, 1=enable.
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1

# Kernel NMI Watchdog:
#   0=disable (default, saves power), 1=enable (for kernel debugging only).
NMI_WATCHDOG=0

# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
# Frequency voltage pairs are written to:
#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"

# Set CPU performance versus energy savings policy:
#   performance, balance-performance, default, balance-power, power.
# Values are given in order of increasing power saving.
# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=power

# Disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"

# Disk advanced power management level: 1..254, 255 (max saving, min, off).
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"

# Hard disk spin down timeout:
#   0:        spin down disabled
#   1..240:   timeouts from 5s to 20min (in units of 5s)
#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"

# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the kernel default scheduler for the particular disk.
#DISK_IOSCHED="cfq cfq"

# AHCI link power management (ALPM) for disk devices:
#   min_power, med_power_with_dipm(*), medium_power, max_performance.
# (*) Kernel >= 4.15 required, then recommended.
# Multiple values separated with spaces are tried sequentially until success.
SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"

# Exclude host devices from AHCI link power management.
# Separate multiple hosts with spaces.
#SATA_LINKPWR_BLACKLIST="host1"

# Runtime Power Management for AHCI host and disks devices:
#   on=disable, auto=enable.
# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
#AHCI_RUNTIME_PM_ON_AC=on
#AHCI_RUNTIME_PM_ON_BAT=on

# Seconds of inactivity before disk is suspended.
AHCI_RUNTIME_PM_TIMEOUT=15

# PCI Express Active State Power Management (PCIe ASPM):
#   default, performance, powersave.
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave

# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low

# Radeon dynamic power management method (DPM): battery, performance.
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery

# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto

# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on

# Disable wake on LAN: Y/N.
WOL_DISABLE=Y

# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power saving (recommended: 1).
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1

# Disable controller too (HDA only): Y/N.
SOUND_POWER_SAVE_CONTROLLER=Y

# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_AC=0
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"

# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto

# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"

# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
# prevents accidential power-on of dGPU in hybrid graphics setups.
# Use "" to disable the feature completely.
# Separate multiple drivers with spaces.
#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"

# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1

# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"

# Bluetooth devices are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude.
USB_BLACKLIST_BTUSB=0

# Phone devices are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude (enable charging).
USB_BLACKLIST_PHONE=0

# Printers are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude.
USB_BLACKLIST_PRINTER=1

# WWAN devices are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude.
USB_BLACKLIST_WWAN=1

# Include listed devices into USB autosuspend even if already excluded
# by the blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"

# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1

# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
#   are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0

# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"

# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"

# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"

# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"

# Radio devices to enable on AC: bluetooth, wifi, wwan.
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"

# Radio devices to disable on battery: bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"

# Radio devices to disable on battery when not in use (not connected):
#   bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"

# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
# Main / Internal battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80

# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
#RESTORE_THRESHOLDS_ON_BAT=1

# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan.

# Hints:
# - Parameters are disabled by default, remove the leading # to enable them
# - Separate multiple radio devices with spaces

# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"

# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""

# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""

# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""


Kod: [Seç]

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev ff)


[Butterfly]

Aşağıdaki komutla /etc/default/tlp dosyasını açıp,

Kod: [Seç]

sudo xed /etc/default/tlp
aşağıdaki satırı dosyanın en altına ekleyip dosyayı kaydedip, sistemi yeniden başlatmayı dener misiniz?

Kod: [Seç]

RUNTIME_PM_BLACKLIST="01:00.0"
Ayrıca aşağıdaki satırları bulup,

Kod: [Seç]

CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power
önlerine # işareti koyarak bu satırları pasifleştiriniz.

Kod: [Seç]

#CPU_HWP_ON_AC=balance_performance
#CPU_HWP_ON_BAT=balance_power

[emreshepherd]

Dediğiniz gibi yaptım. Bilgisayarı tamamen kapattım ve prize taktım. Şimdi açtım.
Yırtılmalar devam ediyor ve fan yine hızlı çalışıyor. Biraz önce prizde değildi yine Chrome açıktı böyle çalışmıyordu fan.
Konu dışı bir problem ama çözümüne baktım bulamadım. Klavye aydınlatması ve numlock her seferinde varsayılan olarak sıfırlanıyor. Nasıl düzeltebilirim? (dconf ile klavye aydınlatmasını arattım ama bulamadım)

[Butterfly]

Fişe takılıyken aşağıdaki komutun çıktısına bakalım.

Kod: [Seç]

tlp-stat -p

[emreshepherd]

Çıktı:

Kod: [Seç]

--- TLP 1.1 --------------------------------------------

+++ Processor
CPU model      = Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu4/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu4/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu4/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu4/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu5/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu5/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu5/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu5/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu5/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu5/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu6/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu6/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu6/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu6/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu6/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu6/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpu7/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu7/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu7/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu7/cpufreq/scaling_min_freq  =  2400000 [kHz]
/sys/devices/system/cpu/cpu7/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu7/cpufreq/scaling_available_frequencies = 2601000 2600000 2500000 2400000 [kHz]

/sys/devices/system/cpu/cpufreq/boost                  = 1

x86_energy_perf_policy: program not installed.

/sys/module/workqueue/parameters/power_efficient       = Y
/proc/sys/kernel/nmi_watchdog                          = 0

+++ Undervolting
PHC kernel not available.