Sanırım internet bağlantısı olmayan bir pc'den sizlere çıktıları göndermem yalnızca pc haricinde internete bağlanabilen bir telefona sahip olduğum için fotoğraf ile gönderilmiş olabilir.Şuanda başka bir arkadaşın bilgisayarını kullanmaktayım.
webkahriman@webkahriman-HP-G62-Notebook-PC ~ $ lsusb
Bus 002 Device 014: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1aa Chicony Electronics Co., Ltd Webcam-101
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
webkahriman@webkahriman-HP-G62-Notebook-PC ~ $ lspci -nnk ǀ grep -iA2 net
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's
Other options:
-i <file> Use specified ID database instead of A2
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
webkahriman@webkahriman-HP-G62-Notebook-PC ~ $ sudo lshw -C network
[sudo] password for webkahriman:
PCI (sysfs)
*-network
açıklama: Eternet interface
ürün: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
üretici: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
mantıksal ad: eth0
sürüm: 02
serial: 3c:4a:92:c9:11:64
boyut: 10Mbit/s
kapasite: 100Mbit/s
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress msix vpd bus_master cap_list rom eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
kaynaklar: irq:41 ioport:2000(boyut=256) bellek:c0410000-c0410fff bellek:c0400000-c040ffff bellek:c0420000-c043ffff
*-network
açıklama: Kablosuz arayüz
ürün: BCM4313 802.11bgn Wireless Network Adapter
üretici: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
mantıksal ad: wlan0
sürüm: 01
serial: ac:81:12:17:12:1f
genişlik: 64 bits
saat: 33MHz
kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
yapılandırma: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=10.45.49.41 latency=0 multicast=yes wireless=IEEE 802.11abg
kaynaklar: irq:18 bellek:c2400000-c2403fff
