Gönderen Konu: Uyku Modu Çalışmıyor  (Okunma sayısı 6392 defa)

Çevrimdışı ernuynk

  • Yeni Penguen
  • *
  • İleti: 42
  • Dağıtım: Ubuntu, Linux Mint
Uyku Modu Çalışmıyor
« : 25 Şubat 2015, 19:05:00 »
Merhaba arkadaşlar, Linux Mint MATE 17.1 sürümünü kullanıyorum. Fakat sık sık karşılaştığım bir sorun var.

Laptop'um uyku moduna girmiyor. FN+F12 ye bastığım zaman ya da güç düğmesi ile uyku kipini seçtiğimde, siyah bir ekran geliyor (bir çok kod yazılı) daha sonrasında tekrar masaüstüne dönüyor.

Çözüm nedir acaba?
Teşekkürler.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Uyku Modu Çalışmıyor
« Yanıtla #1 : 25 Şubat 2015, 23:53:36 »
Öncelikle aşağıdaki komutların çıktılarını rica edelim.

Kod: [Seç]
inxi -Fx
sudo blkid
cat /etc/fstab
sudo fdisk -l
sudo parted -l
cat /etc/initramfs-tools/conf.d/resume
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı ernuynk

  • Yeni Penguen
  • *
  • İleti: 42
  • Dağıtım: Ubuntu, Linux Mint
Ynt: Uyku Modu Çalışmıyor
« Yanıtla #2 : 26 Şubat 2015, 00:04:28 »
Şuan sistem yeniden başlayınca düzeldi. Bazen çalışuyor bazen çalışmıyor.

Kod: [Seç]
inxi -Fx
System:    Host: eu-MSI Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2) Desktop: N/A Distro: Linux Mint 17.1 Rebecca
Machine:   System: Micro-Star (portable) product: GE620/GE620DX/FX620DX/FX623
           Mobo: Micro-Star model: MS-16G5 Bios: American Megatrends version: E16G5IMS V3.0R date: 10/24/2012
CPU:       Dual core Intel Core i5-2450M CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9976.46
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 1800.00 MHz 4: 1600.00 MHz
Graphics:  Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0
           Card-2: NVIDIA GF116M [GeForce GT 555M/635M] bus-ID: 01:00.0
           X.Org: 1.15.1 drivers: (unloaded: fbdev,vesa) FAILED: nouveau,intel Resolution: 1920x1080@60.0hz
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card: Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network:   Card-1: Intel Centrino Wireless-N 130 driver: iwlwifi ver: in-tree: bus-ID: 04:00.0
           IF: wlan0 state: up mac: b8:03:05:46:27:d3
           Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 ver: 2.3LK-NAPI port: d000 bus-ID: 03:00.0
           IF: eth0 state: down mac: 8c:89:a5:a6:ed:dd
Drives:    HDD Total Size: 1120.2GB (0.7% used) 1: id: /dev/sda model: KINGSTON_SH103S3 size: 120.0GB
           2: id: /dev/sdb model: WDC_WD10JPVX size: 1000.2GB
Partition: ID: / size: 142G used: 6.8G (6%) fs: ext4 ID: swap-1 size: 7.38GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   None detected - is lm-sensors installed and configured?Info:      Processes: 267 Uptime: 16 min Memory: 1669.2/5876.4MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4
Kod: [Seç]

sudo blkid
[sudo] password for eu:
/dev/sda1: UUID="AEAC4D6DAC4D30DF" TYPE="ntfs"
/dev/sda2: UUID="2E563FA7563F6F29" TYPE="ntfs"
/dev/sdb1: LABEL="Sistem" UUID="7298F84798F80AFD" TYPE="ntfs"
/dev/sdb5: LABEL="Windows/Linux Ortak" UUID="FCC60503C604BFBE" TYPE="ntfs"
/dev/sdb6: UUID="a39d75bd-c51e-4e29-ba50-f7d9d6732542" TYPE="swap"
/dev/sdb7: UUID="df507316-0306-40a2-a357-aa15ec01c619" TYPE="ext4"
Kod: [Seç]

cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb7 during installation
UUID=df507316-0306-40a2-a357-aa15ec01c619 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdb6 during installation
UUID=a39d75bd-c51e-4e29-ba50-f7d9d6732542 none            swap    sw              0       0
Kod: [Seç]

sudo fdisk -l


Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002dcc5


   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      206847      102400    7  HPFS/NTFS/exFAT
/dev/sda2          206848   234438655   117115904    7  HPFS/NTFS/exFAT


Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000361ff


   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048   586133503   293065728    7  HPFS/NTFS/exFAT
/dev/sdb2       586135550  1953523711   683694081    5  Extended
Partition 2 does not start on physical sector boundary.
/dev/sdb5       903299072  1953523711   525112320    7  HPFS/NTFS/exFAT
/dev/sdb6       888870912   903286783     7207936   82  Linux swap / Solaris
/dev/sdb7       586135552   888867973   151366211   83  Linux


Partition table entries are not in disk order
Kod: [Seç]

sudo parted -l
Model: ATA KINGSTON SH103S3 (scsi)
Disk /dev/sda: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos


Number  Start   End    Size   Type     File system  Flags
 1      1049kB  106MB  105MB  primary  ntfs         boot
 2      106MB   120GB  120GB  primary  ntfs




Model: ATA WDC WD10JPVX-00J (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos


Number  Start   End     Size    Type      File system     Flags
 1      1049kB  300GB   300GB   primary   ntfs
 2      300GB   1000GB  700GB   extended
 7      300GB   455GB   155GB   logical   ext4
 6      455GB   462GB   7381MB  logical   linux-swap(v1)
 5      462GB   1000GB  538GB   logical   ntfs
Kod: [Seç]

cat /etc/initramfs-tools/conf.d/resume
RESUME=UUID=a39d75bd-c51e-4e29-ba50-f7d9d6732542


Teşekkürler.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Uyku Modu Çalışmıyor
« Yanıtla #3 : 26 Şubat 2015, 00:16:45 »
[member=805]ernuynk[/member], Bumblebee'yi kurdunuz mu?

http://forum.linuxmint.net.tr/index.php?topic=78.0
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı ernuynk

  • Yeni Penguen
  • *
  • İleti: 42
  • Dağıtım: Ubuntu, Linux Mint
Ynt: Uyku Modu Çalışmıyor
« Yanıtla #4 : 26 Şubat 2015, 18:33:53 »
[member=805]ernuynk[/member], Bumblebee'yi kurdunuz mu?

http://forum.linuxmint.net.tr/index.php?topic=78.0

Böyle bir çıktı aldım. Oradaki çıktıdan biraz farklı olduğu için yazma gereği duydum.

Kod: [Seç]

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF116M [GeForce GT 555M/635M] (rev a1)

Çevrimdışı Genizcil_N

  • Forum Sorumlusu
  • Guru
  • *****
  • İleti: 1976
  • Dağıtım: Linux Mint 20
  • Masaüstü Ortamı: Mate
Ynt: Uyku Modu Çalışmıyor
« Yanıtla #5 : 26 Şubat 2015, 18:43:57 »
Böyle bir çıktı aldım. Oradaki çıktıdan biraz farklı olduğu için yazma gereği duydum.

Kod: [Seç]

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF116M [GeForce GT 555M/635M] (rev a1)
Bumblebee kurabilirsiniz. Sisteminizde hem Intel hem de Nvidia ekran kartı mevcut.