Gönderen Konu: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu  (Okunma sayısı 8124 defa)

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Öncelikle herkese kolay gelsin. Elime eski bir bilgisayar gecti.Bu bilgisayara mint 18.1 yukledim fakat ekran karti surucusunu yukledigimde surekli hata aliyorum ve beni tty ekranina yonlendiriyor. Burada nvidia surucusunu kaldirdigim zaman bilgisayar yazilimsal isleme modunda aciliyor. Bir süre bilgisayar duzgun calissa da ardindan donuyor ve yeniden baslattigimda beni tekrar tty ekranina yonlendiriyor. Ekranda kirmzi seritler var. Ilgili ciktilar asagidadir. yardimlarinizi bekliyorum.
Kod: [Seç]
inxi -SMGxx
System:    Host: teko-Aspire-5680 Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0)
           Desktop: Cinnamon 3.2.7 (Gtk 3.18.9-1ubuntu3.3) dm: mdm
           Distro: Linux Mint 18.1 Serena
Machine:   System: Acer product: Aspire 5680 v: V2.80 Chassis: type: 10
           Mobo: Acer model: Grapevine Bios: Acer v: V2.80 date: 09/01/2006
Graphics:  Card: NVIDIA G73M [GeForce Go 7600]
           bus-ID: 01:00.0 chip-ID: 10de:0398
           Display Server: X.Org 1.18.4 drivers: vesa (unloaded: fbdev) FAILED: nouveau
           Resolution: 1024x768@61.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)
           GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Kod: [Seç]
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,
Kod: [Seç]
lspci | egrep 'VGA|3D|Display'
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
Kod: [Seç]
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
   1024x768      61.00*
   800x600       61.00 
   640x480       60.00
cat: /etc/X11/xorg.conf: No such file or directory
Kod: [Seç]
ii  libdrm-amdgpu1:i386                   2.4.67-1ubuntu0.16.04.2                      i386         Userspace interface to amdgpu-specific kernel DRM services -- runtime
ii  xserver-xorg-video-amdgpu             1.1.2-0ubuntu0.16.04.1                       i386         X.Org X server -- AMDGPU display driver
Kod: [Seç]
bbswitch, 0.8, 4.4.0-53-generic, i686: installed
ndiswrapper, 1.60, 4.4.0-53-generic, i686: installed
virtualbox-guest, 5.1.38, 4.4.0-53-generic, i686: installed (original_module exists)

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: nvidia geoforce go 7600 sorunu ve xserver
« Yanıtla #1 : 12 Şubat 2020, 18:37:53 »
Öncelikle aşağıdaki komutla bbswitch paketini kaldırın. Bu paket hibrit sistemler için, sizin sisteminize kurulmamalı.

Kod: [Seç]
sudo apt purge bbswitch
Ayrıca aşağıdaki komutlarla Nvidia-304 sürücüsünü kurmayı deneyin.

Kod: [Seç]
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt-get update
sudo apt install nvidia-304 nvidia-settings=361.42-0ubuntu1
sudo apt hold nvidia-settings

Ardından sistemi yeniden başlatırsınız.

Sorun yaşarsanız, burada anlatıldığı biçimde sistemi kurtarma kipi => resume seçeneği ile açıp, aşağıdaki komutların çıktısını paylaşırsınız.

Kod: [Seç]
dkms status
modinfo nvidia
modinfo nvidia-304
modprobe --resolve-alias nvidia
dpkg -l | grep nvidia
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: nvidia geoforce go 7600 sorunu ve xserver
« Yanıtla #2 : 12 Şubat 2020, 20:06:56 »
Hocam bilgisayari grub gozukmedigi icin live cd ile actim.Belki de bu sebeple kodlar yaniltmaz umarim. Eger yapabilirsem grub uzerinden girip birde oradan gondermeti deneyecegim. Sizin  verdiginiz kodlari girdikten sonra tekrar x server yapilandirilamadi ve galiba mdmyi duzeltin gibi bir metin cikti. En son verdiginiz kodlarin ciktisi asagidadir.
Kod: [Seç]
ndiswrapper, 1.59, 4.4.0-53-generic, x86_64: installed
virtualbox-guest, 5.0.24, 4.4.0-53-generic, x86_64: installed (original_module exists)
Kod: [Seç]
modinfo: ERROR: Module nvidia not found
Kod: [Seç]
modinfo: ERROR: Module nvidia-304 not found.
Kod: [Seç]
modprobe: FATAL: Module nvidia not found in directory /lib/modules/4.4.0-53-generic
Kod: [Seç]
ii  nvidia-prime-applet                   1.0.6                                      all          An applet for NVIDIA Prime

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: nvidia geoforce go 7600 sorunu ve xserver
« Yanıtla #3 : 12 Şubat 2020, 20:13:51 »
Çalışan DVD/USB ile paylaştığınız çıktılar bir sonuç vermez. Açılış sırasında kaçış (ESC) ya da üst karakter (shift) tuşlarına basarsanız, Grub menüsüne ulaşabilirsiniz.
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: nvidia geoforce go 7600 sorunu ve xserver
« Yanıtla #4 : 12 Şubat 2020, 20:50:33 »
Hocam live CD üzerinden boot repair ile grubu düzelttim ve gelişmiş seçenekler > recovery mode>resume yaptım fakat yine "X sunucusu şuanda devre dışı. Yapılandırmasını düzelttiğinizde MDM'yi yeniden çalıştırın."mesajını aldım.
TTY ekranında
Kod: [Seç]
sudo apt purge nvidia*kodu ile Nvidia sürücüsünü kaldırdığımda bilgisayar açılıyor fakat ekran hatası ve uyarı mesajı alıyorum. Uyarı mesajında "Yazılımsal görsel işleme kipinde çalışıyor. Cinnamon şuanda video hızlandırıcısıolmadan çalışmaktadır. Ve bunun sonucu olarak CPU kullanımında artış görebilirsiniz." diyor.

Ve yine karşılama ekranından grafik kartı sürücüsünü yüklemeye çalıştığımda aynı hatayı alıyorum. Nvidia sürücülerini kaldırmadan bilgisayar masaüstü görünümünde açılmıyor ve TTY ekranına yönlendiriyor beni. Uygulama mağazası üzerinden Nvidia 304 sürücüsünü yüklediğimde ve sürücü yöneticisinden Nvidia 304 seçtiğimde yine aynı hatayı alıyorum.










TTY ekranında
Kod: [Seç]
startx kodunu yazdığımda uzunca bir hata mesajı alıyorum. Galiba x sunucusuna bağlanamadı gibi bir mesaj var.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: nvidia geoforce go 7600 sorunu ve xserver
« Yanıtla #5 : 12 Şubat 2020, 21:24:58 »
Nvidia sürücüsünü kaldırıp, aşağıdaki komutun çıktısını paylaşınız.

Kod: [Seç]
grep ^ /etc/X11/xorg.conf.d/* /usr/share/X11/xorg.conf.d/* /etc/X11/xorg.conf
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #6 : 12 Şubat 2020, 21:53:35 »
Hocam istediginiz komutun ciktilari asagidadir.
Kod: [Seç]
grep ^ /etc/X11/xorg.conf.d/* /usr/share/X11/xorg.conf.d/* /etc/X11/xorg.conf
grep: /etc/X11/xorg.conf.d/*: No such file or directory
/usr/share/X11/xorg.conf.d/10-amdgpu.conf:Section "OutputClass"
/usr/share/X11/xorg.conf.d/10-amdgpu.conf: Identifier "AMDgpu"
/usr/share/X11/xorg.conf.d/10-amdgpu.conf: MatchDriver "amdgpu"
/usr/share/X11/xorg.conf.d/10-amdgpu.conf: Driver "amdgpu"
/usr/share/X11/xorg.conf.d/10-amdgpu.conf:EndSection
/usr/share/X11/xorg.conf.d/10-evdev.conf:#
/usr/share/X11/xorg.conf.d/10-evdev.conf:# Catch-all evdev loader for udev-based systems
/usr/share/X11/xorg.conf.d/10-evdev.conf:# We don't simply match on any device since that also adds accelerometers
/usr/share/X11/xorg.conf.d/10-evdev.conf:# and other devices that we don't really want to use. The list below
/usr/share/X11/xorg.conf.d/10-evdev.conf:# matches everything but joysticks.
/usr/share/X11/xorg.conf.d/10-evdev.conf:
/usr/share/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev pointer catchall"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchIsPointer "on"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/usr/share/X11/xorg.conf.d/10-evdev.conf:EndSection
/usr/share/X11/xorg.conf.d/10-evdev.conf:
/usr/share/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev keyboard catchall"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchIsKeyboard "on"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/usr/share/X11/xorg.conf.d/10-evdev.conf:EndSection
/usr/share/X11/xorg.conf.d/10-evdev.conf:
/usr/share/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev touchpad catchall"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchIsTouchpad "on"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/usr/share/X11/xorg.conf.d/10-evdev.conf:EndSection
/usr/share/X11/xorg.conf.d/10-evdev.conf:
/usr/share/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev tablet catchall"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchIsTablet "on"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/usr/share/X11/xorg.conf.d/10-evdev.conf:EndSection
/usr/share/X11/xorg.conf.d/10-evdev.conf:
/usr/share/X11/xorg.conf.d/10-evdev.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Identifier "evdev touchscreen catchall"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchIsTouchscreen "on"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/10-evdev.conf:        Driver "evdev"
/usr/share/X11/xorg.conf.d/10-evdev.conf:EndSection
/usr/share/X11/xorg.conf.d/10-quirks.conf:# Collection of quirks and blacklist/whitelists for specific devices.
/usr/share/X11/xorg.conf.d/10-quirks.conf:
/usr/share/X11/xorg.conf.d/10-quirks.conf:
/usr/share/X11/xorg.conf.d/10-quirks.conf:# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
/usr/share/X11/xorg.conf.d/10-quirks.conf:# http://bugs.freedesktop.org/show_bug.cgi?id=22442
/usr/share/X11/xorg.conf.d/10-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Identifier "ThinkPad HDAPS accelerometer blacklist"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        MatchProduct "ThinkPad HDAPS accelerometer data"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Option "Ignore" "on"
/usr/share/X11/xorg.conf.d/10-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/10-quirks.conf:
/usr/share/X11/xorg.conf.d/10-quirks.conf:# https://bugzilla.redhat.com/show_bug.cgi?id=523914
/usr/share/X11/xorg.conf.d/10-quirks.conf:# Mouse does not move in PV Xen guest
/usr/share/X11/xorg.conf.d/10-quirks.conf:# Explicitly tell evdev to not ignore the absolute axes.
/usr/share/X11/xorg.conf.d/10-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Identifier "Xen Virtual Pointer axis blacklist"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        MatchProduct "Xen Virtual Pointer"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Option "IgnoreAbsoluteAxes" "off"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Option "IgnoreRelativeAxes" "off"
/usr/share/X11/xorg.conf.d/10-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/10-quirks.conf:
/usr/share/X11/xorg.conf.d/10-quirks.conf:# https://bugs.freedesktop.org/show_bug.cgi?id=55867
/usr/share/X11/xorg.conf.d/10-quirks.conf:# Bug 55867 - Doesn't know how to tag XI_TRACKBALL
/usr/share/X11/xorg.conf.d/10-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Identifier "Tag trackballs as XI_TRACKBALL"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        MatchProduct "trackball"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        MatchDriver "evdev"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Option "TypeName" "TRACKBALL"
/usr/share/X11/xorg.conf.d/10-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/10-quirks.conf:
/usr/share/X11/xorg.conf.d/10-quirks.conf:# https://bugs.freedesktop.org/show_bug.cgi?id=62831
/usr/share/X11/xorg.conf.d/10-quirks.conf:# Bug 62831 - Mionix Naos 5000 mouse detected incorrectly
/usr/share/X11/xorg.conf.d/10-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Identifier "Tag Mionix Naos 5000 mouse XI_MOUSE"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        MatchProduct "La-VIEW Technology Naos 5000 Mouse"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        MatchDriver "evdev"
/usr/share/X11/xorg.conf.d/10-quirks.conf:        Option "TypeName" "MOUSE"
/usr/share/X11/xorg.conf.d/10-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Identifier "Avago Technologies mouse quirks (LP: #746639)"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: MatchIsPointer "on"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Driver "evdev"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: MatchUSBID "192f:0416"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Option "Emulate3Buttons" "True"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Option "Emulate3Timeout" "50"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:# X/Y axis not working due to device reporting absolute axes
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:# https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/325581
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:# https://bugs.freedesktop.org/show_bug.cgi?id=32882
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Identifier "Benq m310"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: MatchProduct "HID 0d62:1000"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Driver "evdev"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf: Option "IgnoreAbsoluteAxes" "true"
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf:# trackpoint users want wheel emulation
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf:
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: Identifier "trackpoint catchall"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: MatchIsPointer "true"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: MatchProduct "TrackPoint|DualPoint Stick"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: Option "Emulate3Buttons" "true"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: Option "EmulateWheel" "true"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: Option "EmulateWheelButton" "2"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: Option "XAxisMapping" "6 7"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf: Option "YAxisMapping" "4 5"
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf:EndSection
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# Example xorg.conf.d snippet that assigns the touchpad driver
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# to all touchpads. See xorg.conf.d(5) for more information on
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# InputClass.
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# DO NOT EDIT THIS FILE, your distribution will likely overwrite
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# it when updating. Copy (and rename) this file into
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# /etc/X11/xorg.conf.d first.
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# Additional options may be added in the form of
/usr/share/X11/xorg.conf.d/50-synaptics.conf:#   Option "OptionName" "value"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:#
/usr/share/X11/xorg.conf.d/50-synaptics.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Identifier "touchpad catchall"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Driver "synaptics"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchIsTouchpad "on"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# This option is recommend on all Linux systems using evdev, but cannot be
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# enabled by default. See the following link for details:
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
/usr/share/X11/xorg.conf.d/50-synaptics.conf:      MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:EndSection
/usr/share/X11/xorg.conf.d/50-synaptics.conf:
/usr/share/X11/xorg.conf.d/50-synaptics.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Identifier "touchpad ignore duplicates"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchIsTouchpad "on"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchOS "Linux"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchDevicePath "/dev/input/mouse*"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Option "Ignore" "on"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:EndSection
/usr/share/X11/xorg.conf.d/50-synaptics.conf:
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# This option enables the bottom right corner to be a right button on clickpads
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# and the right and middle top areas to be right / middle buttons on clickpads
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# with a top button area.
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# This option is only interpreted by clickpads.
/usr/share/X11/xorg.conf.d/50-synaptics.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Identifier "Default clickpad buttons"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchDriver "synaptics"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:EndSection
/usr/share/X11/xorg.conf.d/50-synaptics.conf:
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# This option disables software buttons on Apple touchpads.
/usr/share/X11/xorg.conf.d/50-synaptics.conf:# This option is only interpreted by clickpads.
/usr/share/X11/xorg.conf.d/50-synaptics.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Identifier "Disable clickpad buttons on Apple touchpads"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchProduct "Apple|bcm5974"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        MatchDriver "synaptics"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
/usr/share/X11/xorg.conf.d/50-synaptics.conf:EndSection
/usr/share/X11/xorg.conf.d/50-vmmouse.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-vmmouse.conf: Identifier "vmmouse"
/usr/share/X11/xorg.conf.d/50-vmmouse.conf: MatchIsPointer "on"
/usr/share/X11/xorg.conf.d/50-vmmouse.conf: MatchTag "vmmouse"
/usr/share/X11/xorg.conf.d/50-vmmouse.conf: Driver "vmmouse"
/usr/share/X11/xorg.conf.d/50-vmmouse.conf:EndSection
/usr/share/X11/xorg.conf.d/50-vmmouse.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        Identifier "Wacom USB device class"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        MatchUSBID "056a:*"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        Identifier "Wacom PnP device class"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        MatchPnPID "WACf*|WCOM*|WACM*|FUJ02e5|FUJ02e7|FUJ02e9"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Identifier "Wacom class"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchProduct "Wacom|WACOM|PTK-540WL|ISD-V4"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Identifier "Wacom serial class"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchProduct "Serial Wacom Tablet"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        Identifier "Wacom serial class identifiers"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
/usr/share/X11/xorg.conf.d/50-wacom.conf:        Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:# Hanwang tablets
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Identifier "Hanwang class"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchProduct "Hanwang"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:# Waltop tablets
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Identifier "Waltop class"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchProduct "WALTOP"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchIsTablet "on"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/50-wacom.conf:# N-Trig Duosense Electromagnetic Digitizer
/usr/share/X11/xorg.conf.d/50-wacom.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Identifier "Wacom N-Trig class"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchProduct "HID 1b96:0001|N-Trig Pen|N-Trig DuoSense"
/usr/share/X11/xorg.conf.d/50-wacom.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Driver "wacom"
/usr/share/X11/xorg.conf.d/50-wacom.conf: Option "Button2" "3"
/usr/share/X11/xorg.conf.d/50-wacom.conf:EndSection
/usr/share/X11/xorg.conf.d/50-wacom.conf:
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Identifier "Dell Inspiron embedded buttons quirks"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: MatchTag "inspiron_1011|inspiron_1012"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Driver "synaptics"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Option "JumpyCursorThreshold" "90"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Identifier "Dell Inspiron quirks"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: MatchTag "inspiron_1120"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Driver "synaptics"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Option "JumpyCursorThreshold" "250"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:EndSection
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:Section "InputClass"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Identifier "HP Mininote quirks"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: MatchTag "mininote_1000"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: MatchDevicePath "/dev/input/event*"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Driver "synaptics"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf: Option "JumpyCursorThreshold" "20"
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf:EndSection
grep: /etc/X11/xorg.conf: No such file or directory
Ayrica TTY ekraninda nvidia surucusunu kaldirdiktan sonra asagidaki kodlari calistirinca da ayni hatayi aliyorum.Fakat ilk iki kodla x sunucusunu kaldirdigimda bilgisayar yazilimsal gorsel isleme kipinde calisiyor.
Kod: [Seç]
sudo apt-get remove xserver-xorg
Kod: [Seç]
sudo apt-get remove --purge xserver-xorg
Kod: [Seç]
sudo apt-get install xserver-xorg
Kod: [Seç]
sudo nvidia-xconfig
Kod: [Seç]
sudo dpkg-reconfigure xserver-xorg
Kod: [Seç]
startx

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #7 : 12 Şubat 2020, 22:37:11 »
İyi de size sonradan paylaştığınız komutları önermedim, önerilmediği halde neden böyle bir şey yaptınız? Bu şekilde bahsetmediğiniz farklı bir düzenleme/işlem yaptınız mı?

Aşağıdaki komutlar X sunucusu ile ilgili paketleri yeniden kurmayı deneyiniz.

Kod: [Seç]
sudo apt install --reinstall libgl1-mesa-dri libgl1-mesa-glx xserver-xorg-video-all xserver-xorg xserver-xorg-core
Kod: [Seç]
sudo dpkg-reconfigure xserver-xorg
Sadece yönlendirmeleri uygulamaya özen gösteriniz, farklı yerlerdeki işlemleri uygulamayınız. Şu an için Nvidia sahipli sürücüsü kurulu olmasın, yukarıdakileri uygulayıp sistemi yeniden başlatınız.
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #8 : 12 Şubat 2020, 23:29:11 »
Hocam sorunun x sunucusundan kaynaklandığını düşündüm ve yapılandırmaya çalıştım. Bu değişikliklerin haricinde herhangi bir değişiklik yapmadım. Şuan Nvidia sürücüleri kurulu değil. Verdiğiniz kodları girdiğimde herhangi bir değişiklik olmadı, cihaz hala yazılımsal görsel işleme kipinde çalışıyor ve sorun devam ediyor. Yardımcı olduğunuz için tekrar çok teşekkür ederim. Bir daha önerilen işlemler dışında başka bir işlem yapmamaya özen göstereceğim.
« Son Düzenleme: 12 Şubat 2020, 23:31:24 Gönderen: abdulkadir0666 »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #9 : 12 Şubat 2020, 23:31:40 »
Nvidia sürücüsünü .run dosyasıyla, elle kurmayı denediniz mi?  Ayrıca aşağıdaki komutun çıktısına bakalım.

Kod: [Seç]
grep ^ /etc/modprobe.d/*
« Son Düzenleme: 12 Şubat 2020, 23:34:31 Gönderen: Butterfly »
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #10 : 12 Şubat 2020, 23:56:58 »
Evet hocam Nvidianin sitesinden .run uzantili dosyayi indirdim, calistirilabilir yaptim ve kurmayi denedim fakat hata verdi. Hata metni tam olarak söyle;
Kod: [Seç]
ERROR: You appear to be running an X server; please exit X before           
         installing.  For further details, please see the section INSTALLING   
         THE NVIDIA DRIVER in the README available on the Linux driver         
         download page at www.nvidia.com.
ERROR: Installation has failed.  Please see the file
         '/var/log/nvidia-installer.log' for details.  You may find           
         suggestions on fixing installation problems in the README available   
         on the Linux driver download page at www.nvidia.com.

Verdiginiz kodun ciktisi asagidadir.
Kod: [Seç]
grep ^ /etc/modprobe.d/*
/etc/modprobe.d/alsa-base.conf:# autoloader aliases
/etc/modprobe.d/alsa-base.conf:install sound-slot-0 /sbin/modprobe snd-card-0
/etc/modprobe.d/alsa-base.conf:install sound-slot-1 /sbin/modprobe snd-card-1
/etc/modprobe.d/alsa-base.conf:install sound-slot-2 /sbin/modprobe snd-card-2
/etc/modprobe.d/alsa-base.conf:install sound-slot-3 /sbin/modprobe snd-card-3
/etc/modprobe.d/alsa-base.conf:install sound-slot-4 /sbin/modprobe snd-card-4
/etc/modprobe.d/alsa-base.conf:install sound-slot-5 /sbin/modprobe snd-card-5
/etc/modprobe.d/alsa-base.conf:install sound-slot-6 /sbin/modprobe snd-card-6
/etc/modprobe.d/alsa-base.conf:install sound-slot-7 /sbin/modprobe snd-card-7
/etc/modprobe.d/alsa-base.conf:
/etc/modprobe.d/alsa-base.conf:# Cause optional modules to be loaded above generic modules
/etc/modprobe.d/alsa-base.conf:install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
/etc/modprobe.d/alsa-base.conf:#
/etc/modprobe.d/alsa-base.conf:# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
/etc/modprobe.d/alsa-base.conf:install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
/etc/modprobe.d/alsa-base.conf:install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
/etc/modprobe.d/alsa-base.conf:install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
/etc/modprobe.d/alsa-base.conf:#
/etc/modprobe.d/alsa-base.conf:install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
/etc/modprobe.d/alsa-base.conf:# Cause optional modules to be loaded above sound card driver modules
/etc/modprobe.d/alsa-base.conf:install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
/etc/modprobe.d/alsa-base.conf:install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
/etc/modprobe.d/alsa-base.conf:
/etc/modprobe.d/alsa-base.conf:# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
/etc/modprobe.d/alsa-base.conf:install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
/etc/modprobe.d/alsa-base.conf:# Prevent abnormal drivers from grabbing index 0
/etc/modprobe.d/alsa-base.conf:options bt87x index=-2
/etc/modprobe.d/alsa-base.conf:options cx88_alsa index=-2
/etc/modprobe.d/alsa-base.conf:options saa7134-alsa index=-2
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-intel8x0m index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-usb-audio index=-2
/etc/modprobe.d/alsa-base.conf:options snd-usb-caiaq index=-2
/etc/modprobe.d/alsa-base.conf:options snd-usb-ua101 index=-2
/etc/modprobe.d/alsa-base.conf:options snd-usb-us122l index=-2
/etc/modprobe.d/alsa-base.conf:options snd-usb-usx2y index=-2
/etc/modprobe.d/alsa-base.conf:# Ubuntu #62691, enable MPU for snd-cmipci
/etc/modprobe.d/alsa-base.conf:options snd-cmipci mpu_port=0x330 fm_port=0x388
/etc/modprobe.d/alsa-base.conf:# Keep snd-pcsp from being loaded as first soundcard
/etc/modprobe.d/alsa-base.conf:options snd-pcsp index=-2
/etc/modprobe.d/alsa-base.conf:# Keep snd-usb-audio from beeing loaded as first soundcard
/etc/modprobe.d/alsa-base.conf:options snd-usb-audio index=-2
/etc/modprobe.d/blacklist-ath_pci.conf:# For some Atheros 5K RF MACs, the madwifi driver loads buts fails to
/etc/modprobe.d/blacklist-ath_pci.conf:# correctly initialize the hardware, leaving it in a state from
/etc/modprobe.d/blacklist-ath_pci.conf:# which ath5k cannot recover. To prevent this condition, stop
/etc/modprobe.d/blacklist-ath_pci.conf:# madwifi from loading by default. Use Jockey to select one driver
/etc/modprobe.d/blacklist-ath_pci.conf:# or the other. (Ubuntu: #315056, #323830)
/etc/modprobe.d/blacklist-ath_pci.conf:blacklist ath_pci
/etc/modprobe.d/blacklist-ath_pci.conf:
/etc/modprobe.d/blacklist.conf:# This file lists those modules which we don't want to be loaded by
/etc/modprobe.d/blacklist.conf:# alias expansion, usually so some other driver will be loaded for the
/etc/modprobe.d/blacklist.conf:# device instead.
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# evbug is a debug tool that should be loaded explicitly
/etc/modprobe.d/blacklist.conf:blacklist evbug
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# these drivers are very simple, the HID drivers are usually preferred
/etc/modprobe.d/blacklist.conf:blacklist usbmouse
/etc/modprobe.d/blacklist.conf:blacklist usbkbd
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# replaced by e100
/etc/modprobe.d/blacklist.conf:blacklist eepro100
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# replaced by tulip
/etc/modprobe.d/blacklist.conf:blacklist de4x5
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# causes no end of confusion by creating unexpected network interfaces
/etc/modprobe.d/blacklist.conf:blacklist eth1394
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
/etc/modprobe.d/blacklist.conf:# hardware on its own (Ubuntu bug #2011, #6810)
/etc/modprobe.d/blacklist.conf:blacklist snd_intel8x0m
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# Conflicts with dvb driver (which is better for handling this device)
/etc/modprobe.d/blacklist.conf:blacklist snd_aw2
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# Causes trackpads to stop working on Lenovo 11e 2nd gen (Ubuntu: #1802135)
/etc/modprobe.d/blacklist.conf:# and Lenovo x240 to hang on boot (Ubuntu: #1802689)
/etc/modprobe.d/blacklist.conf:blacklist i2c_i801
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# replaced by p54pci
/etc/modprobe.d/blacklist.conf:blacklist prism54
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# most apps now use garmin usb driver directly (Ubuntu: #114565)
/etc/modprobe.d/blacklist.conf:blacklist garmin_gps
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# replaced by asus-laptop (Ubuntu: #184721)
/etc/modprobe.d/blacklist.conf:blacklist asus_acpi
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# low-quality, just noise when being used for sound playback, causes
/etc/modprobe.d/blacklist.conf:# hangs at desktop session start (Ubuntu: #246969)
/etc/modprobe.d/blacklist.conf:blacklist snd_pcsp
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# ugly and loud noise, getting on everyone's nerves; this should be done by a
/etc/modprobe.d/blacklist.conf:# nice pulseaudio bing (Ubuntu: #77010)
/etc/modprobe.d/blacklist.conf:blacklist pcspkr
/etc/modprobe.d/blacklist.conf:
/etc/modprobe.d/blacklist.conf:# EDAC driver for amd76x clashes with the agp driver preventing the aperture
/etc/modprobe.d/blacklist.conf:# from being initialised (Ubuntu: #297750). Blacklist so that the driver
/etc/modprobe.d/blacklist.conf:# continues to build and is installable for the few cases where its
/etc/modprobe.d/blacklist.conf:# really needed.
/etc/modprobe.d/blacklist.conf:blacklist amd76x_edac
/etc/modprobe.d/blacklist-firewire.conf:# Select the legacy firewire stack over the new CONFIG_FIREWIRE one.
/etc/modprobe.d/blacklist-firewire.conf:
/etc/modprobe.d/blacklist-firewire.conf:blacklist ohci1394
/etc/modprobe.d/blacklist-firewire.conf:blacklist sbp2
/etc/modprobe.d/blacklist-firewire.conf:blacklist dv1394
/etc/modprobe.d/blacklist-firewire.conf:blacklist raw1394
/etc/modprobe.d/blacklist-firewire.conf:blacklist video1394
/etc/modprobe.d/blacklist-firewire.conf:
/etc/modprobe.d/blacklist-firewire.conf:#blacklist firewire-ohci
/etc/modprobe.d/blacklist-firewire.conf:#blacklist firewire-sbp2
/etc/modprobe.d/blacklist-framebuffer.conf:# Framebuffer drivers are generally buggy and poorly-supported, and cause
/etc/modprobe.d/blacklist-framebuffer.conf:# suspend failures, kernel panics and general mayhem.  For this reason we
/etc/modprobe.d/blacklist-framebuffer.conf:# never load them automatically.
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist aty128fb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist atyfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist bochs-drm
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist radeonfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist cirrusfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist cyber2000fb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist cyblafb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist gx1fb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist hgafb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist i810fb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist intelfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist kyrofb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist lxfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist matroxfb_base
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist neofb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist nvidiafb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist pm2fb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist rivafb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist s1d13xxxfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist savagefb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist sisfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist sstfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist tdfxfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist tridentfb
/etc/modprobe.d/blacklist-framebuffer.conf:#blacklist vesafb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist vfb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist viafb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist vt8623fb
/etc/modprobe.d/blacklist-framebuffer.conf:blacklist udlfb
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-intel8x0m
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/blacklist-oss.conf:blacklist ac97
/etc/modprobe.d/blacklist-oss.conf:blacklist ac97_codec
/etc/modprobe.d/blacklist-oss.conf:blacklist ac97_plugin_ad1980
/etc/modprobe.d/blacklist-oss.conf:blacklist ad1848
/etc/modprobe.d/blacklist-oss.conf:blacklist ad1889
/etc/modprobe.d/blacklist-oss.conf:blacklist adlib_card
/etc/modprobe.d/blacklist-oss.conf:blacklist aedsp16
/etc/modprobe.d/blacklist-oss.conf:blacklist ali5455
/etc/modprobe.d/blacklist-oss.conf:blacklist btaudio
/etc/modprobe.d/blacklist-oss.conf:blacklist cmpci
/etc/modprobe.d/blacklist-oss.conf:blacklist cs4232
/etc/modprobe.d/blacklist-oss.conf:blacklist cs4281
/etc/modprobe.d/blacklist-oss.conf:blacklist cs461x
/etc/modprobe.d/blacklist-oss.conf:blacklist cs46xx
/etc/modprobe.d/blacklist-oss.conf:blacklist emu10k1
/etc/modprobe.d/blacklist-oss.conf:blacklist es1370
/etc/modprobe.d/blacklist-oss.conf:blacklist es1371
/etc/modprobe.d/blacklist-oss.conf:blacklist esssolo1
/etc/modprobe.d/blacklist-oss.conf:blacklist forte
/etc/modprobe.d/blacklist-oss.conf:blacklist gus
/etc/modprobe.d/blacklist-oss.conf:blacklist i810_audio
/etc/modprobe.d/blacklist-oss.conf:blacklist kahlua
/etc/modprobe.d/blacklist-oss.conf:blacklist mad16
/etc/modprobe.d/blacklist-oss.conf:blacklist maestro
/etc/modprobe.d/blacklist-oss.conf:blacklist maestro3
/etc/modprobe.d/blacklist-oss.conf:blacklist maui
/etc/modprobe.d/blacklist-oss.conf:blacklist mpu401
/etc/modprobe.d/blacklist-oss.conf:blacklist nm256_audio
/etc/modprobe.d/blacklist-oss.conf:blacklist opl3
/etc/modprobe.d/blacklist-oss.conf:blacklist opl3sa
/etc/modprobe.d/blacklist-oss.conf:blacklist opl3sa2
/etc/modprobe.d/blacklist-oss.conf:blacklist pas2
/etc/modprobe.d/blacklist-oss.conf:blacklist pss
/etc/modprobe.d/blacklist-oss.conf:blacklist rme96xx
/etc/modprobe.d/blacklist-oss.conf:blacklist sb
/etc/modprobe.d/blacklist-oss.conf:blacklist sb_lib
/etc/modprobe.d/blacklist-oss.conf:blacklist sgalaxy
/etc/modprobe.d/blacklist-oss.conf:blacklist sonicvibes
/etc/modprobe.d/blacklist-oss.conf:blacklist sound
/etc/modprobe.d/blacklist-oss.conf:blacklist sscape
/etc/modprobe.d/blacklist-oss.conf:blacklist trident
/etc/modprobe.d/blacklist-oss.conf:blacklist trix
/etc/modprobe.d/blacklist-oss.conf:blacklist uart401
/etc/modprobe.d/blacklist-oss.conf:blacklist uart6850
/etc/modprobe.d/blacklist-oss.conf:blacklist via82cxxx_audio
/etc/modprobe.d/blacklist-oss.conf:blacklist v_midi
/etc/modprobe.d/blacklist-oss.conf:blacklist wavefront
/etc/modprobe.d/blacklist-oss.conf:blacklist ymfpci
/etc/modprobe.d/blacklist-oss.conf:blacklist ac97_plugin_wm97xx
/etc/modprobe.d/blacklist-oss.conf:blacklist ad1816
/etc/modprobe.d/blacklist-oss.conf:blacklist audio
/etc/modprobe.d/blacklist-oss.conf:blacklist awe_wave
/etc/modprobe.d/blacklist-oss.conf:blacklist dmasound_core
/etc/modprobe.d/blacklist-oss.conf:blacklist dmasound_pmac
/etc/modprobe.d/blacklist-oss.conf:blacklist harmony
/etc/modprobe.d/blacklist-oss.conf:blacklist sequencer
/etc/modprobe.d/blacklist-oss.conf:blacklist soundcard
/etc/modprobe.d/blacklist-oss.conf:blacklist usb-midi
/etc/modprobe.d/blacklist-rare-network.conf:# Many less commonly used network protocols have recently had various
/etc/modprobe.d/blacklist-rare-network.conf:# security flaws discovered. In an effort to reduce the scope of future
/etc/modprobe.d/blacklist-rare-network.conf:# vulnerability exploitations, they are being blacklisted here so that
/etc/modprobe.d/blacklist-rare-network.conf:# unprivileged users cannot use them by default. System owners can still
/etc/modprobe.d/blacklist-rare-network.conf:# either modify this file, or specifically modprobe any needed protocols.
/etc/modprobe.d/blacklist-rare-network.conf:
/etc/modprobe.d/blacklist-rare-network.conf:# ax25
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-3 off
/etc/modprobe.d/blacklist-rare-network.conf:# netrom
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-6 off
/etc/modprobe.d/blacklist-rare-network.conf:# x25
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-9 off
/etc/modprobe.d/blacklist-rare-network.conf:# rose
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-11 off
/etc/modprobe.d/blacklist-rare-network.conf:# decnet
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-12 off
/etc/modprobe.d/blacklist-rare-network.conf:# econet
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-19 off
/etc/modprobe.d/blacklist-rare-network.conf:# rds
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-21 off
/etc/modprobe.d/blacklist-rare-network.conf:# af_802154
/etc/modprobe.d/blacklist-rare-network.conf:alias net-pf-36 off
/etc/modprobe.d/blacklist-watchdog.conf:# Watchdog drivers should not be loaded automatically, but only if a
/etc/modprobe.d/blacklist-watchdog.conf:# watchdog daemon is installed.
/etc/modprobe.d/blacklist-watchdog.conf:blacklist acquirewdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist advantechwdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist alim1535_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist alim7101_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist booke_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist cpu5wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist eurotechwdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist i6300esb
/etc/modprobe.d/blacklist-watchdog.conf:blacklist i8xx_tco
/etc/modprobe.d/blacklist-watchdog.conf:blacklist ib700wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist ibmasr
/etc/modprobe.d/blacklist-watchdog.conf:blacklist indydog
/etc/modprobe.d/blacklist-watchdog.conf:blacklist iTCO_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist it8712f_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist it87_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist ixp2000_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist ixp4xx_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist machzwd
/etc/modprobe.d/blacklist-watchdog.conf:blacklist mixcomwd
/etc/modprobe.d/blacklist-watchdog.conf:blacklist mpc8xx_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist mpcore_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist mv64x60_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist pc87413_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist pcwd
/etc/modprobe.d/blacklist-watchdog.conf:blacklist pcwd_pci
/etc/modprobe.d/blacklist-watchdog.conf:blacklist pcwd_usb
/etc/modprobe.d/blacklist-watchdog.conf:blacklist s3c2410_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sa1100_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sbc60xxwdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sbc7240_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sb8360
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sc1200wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sc520_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist sch311_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist scx200_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist shwdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist smsc37b787_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist softdog
/etc/modprobe.d/blacklist-watchdog.conf:blacklist twl4030_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist w83627hf_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist w83697hf_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist w83697ug_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist w83877f_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist w83977f_wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist wafer5823wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist wdt
/etc/modprobe.d/blacklist-watchdog.conf:blacklist wdt_pci
/etc/modprobe.d/blacklist-watchdog.conf:blacklist wm8350_wdt
/etc/modprobe.d/dkms.conf:# modprobe information used for DKMS modules
/etc/modprobe.d/dkms.conf:#
/etc/modprobe.d/dkms.conf:# This is a stub file, should be edited when needed,
/etc/modprobe.d/dkms.conf:# used by default by DKMS.
/etc/modprobe.d/fbdev-blacklist.conf:# This file blacklists most old-style PCI framebuffer drivers.
/etc/modprobe.d/fbdev-blacklist.conf:
/etc/modprobe.d/fbdev-blacklist.conf:blacklist arkfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist aty128fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist atyfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist radeonfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist cirrusfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist cyber2000fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist kyrofb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist matroxfb_base
/etc/modprobe.d/fbdev-blacklist.conf:blacklist mb862xxfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist neofb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist pm2fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist pm3fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist s3fb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist savagefb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist sisfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist tdfxfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist tridentfb
/etc/modprobe.d/fbdev-blacklist.conf:blacklist vt8623fb
/etc/modprobe.d/intel-microcode-blacklist.conf:# The microcode module attempts to apply a microcode update when
/etc/modprobe.d/intel-microcode-blacklist.conf:# it autoloads.  This is not always safe, so we block it by default.
/etc/modprobe.d/intel-microcode-blacklist.conf:blacklist microcode
/etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system.  When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
/etc/modprobe.d/iwlwifi.conf:&& /sbin/modprobe -r mac80211
/etc/modprobe.d/mlx4.conf:# mlx4_core gets automatically loaded, load mlx4_en also (LP: #1115710)
/etc/modprobe.d/mlx4.conf:softdep mlx4_core post: mlx4_en
/etc/modprobe.d/vmwgfx-fbdev.conf:options vmwgfx enable_fbdev=1


Düzenleme: Kod etiketi
« Son Düzenleme: 13 Şubat 2020, 13:22:23 Gönderen: Reddet »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #11 : 13 Şubat 2020, 01:12:25 »
Aşağıdaki komutların da çıktısını paylaşın.

Kod: [Seç]
cat /proc/cmdline
cat /var/log/Xorg.0.log
inxi -Gxx
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #12 : 13 Şubat 2020, 02:04:16 »
Hocam forum'da karakter kısıtlaması olduğu için 40000 karakterden fazla metin gönderemiyorum. Libre Office'e göre karakter sayısı toplamda 58 bin kadar. Arka arkaya göndermeye çalıştığımda metin otomatik olarak birleştiriliyor. Bu sebeple
Kod: [Seç]
cat /var/log/Xorg.0.log kodunun çıktısını gönderemiyorum. Bu çıktıyı size nasıl iletebilirim?

Mesajlar Birleştirildi.
Birinci ve ücüncü kodun ciktisi asagidadir.
Kod: [Seç]
cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=bed89552-15b9-48af-9934-3ab49cd68902 ro quiet splash
Kod: [Seç]
inxi -Gxx
Graphics:  Card: NVIDIA G73M [GeForce Go 7600]
           bus-ID: 01:00.0 chip-ID: 10de:0398
           Display Server: X.Org 1.18.4 drivers: vesa (unloaded: fbdev) FAILED: nouveau
           Resolution: 1024x768@61.00hz
           GLX Renderer: llvmpipe (LLVM 6.0, 128 bits)
           GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes

Mesajlar Birleştirildi.
cat /var/log/xorg.0.log kodunun cıktısını içeren dosyanın linkidir.
https://paste2.org/WAFcgsE7


Düzenleme: Çıktı bağlantısı
« Son Düzenleme: 13 Şubat 2020, 14:09:07 Gönderen: Butterfly »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #13 : 13 Şubat 2020, 14:12:22 »
Alıntı
[    41.802] (II) LoadModule: "nvidia"
[    41.803] (WW) Warning, couldn't open module nvidia
[    41.803] (II) UnloadModule: "nvidia"
[    41.803] (II) Unloading nvidia
[ 41.803] (EE) Failed to load module "nvidia" (module does not exist, 0)

Çıktılardan nvidia sürücüsünün sisteminizde kurulu olduğu görünüyor, sizden şu an için kaldırmanızı istemiştim. Eğer kaldırdıysanız, bu durumda .run uzantılı dosya ile elle kurulum yapmış olduğunuz için duruyor olabilir. Bu durumda, öncelikle bu sürücüyü elle kaldırmanız gerekir. Kurulumu için rehber aldığınız kaynakta, nasıl kaldırılacağı da anlatılmıştır.

Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı abdulkadir0666

  • Yeni Penguen
  • *
  • İleti: 31
  • Dağıtım: Linux Mint 18.3
  • Masaüstü Ortamı: cinnamon
Ynt: Linux Mint 18.1 - Nvidia GeForce Go 7600 Sürücü Sorunu
« Yanıtla #14 : 13 Şubat 2020, 15:05:45 »
Hocam Nvidianin kendi sitesinde surucuyu kaldirmaya dair birsey bulamadim ama autoremove komutunu calistirdim. Galiba surucunun kalintilari temizlendi ya da pek anlamadigim icin komut ciktisinda goremedim birsey. Eger kaldiramadiysam bunu dogru sekilde nasil yapacagim hakkinda beni yonlendirir misiniz? Ilgili komutun cikti baglantisi asagidadir.
https://paste2.org/4a1yctVO