Canon Laserjet Shot LBP-1120 kurlumu sırasında oluşan hata

[mehmethanifi]

Merhabalar,

Canon Laserjet Shot LBP-1120 kurlumu yapmak için öncelikle http://www.canon-europe.com/support/consumer_products/products/printers/laser/laser_shot_lbp1120.aspx?type=drivers&driverdetailid=tcm:13-1057853&os=Linux%20%2832-bit%29&language=EN  sitesinden debian tabanlı sürücüleri indirdim.
gdebi ile çalıştırmak istediğim zaman aşağıda görülen durum oluşuyor.

not: chmod +x komutunu ve chmod 777 komutlarını kullandım.

Kod: [Seç]

inxi -Fxz
System:    Host: almilli Kernel: 3.16.0-38-generic i686 (32 bit, gcc: 4.8.2)
           Desktop: Xfce 4.12.2 (Gtk 2.24.23) Distro: Linux Mint 17.2 Rafaela
Machine:   Mobo: N/A model: RS/RX482SB400 Bios: Phoenix version: 6.00 PG date: 11/04/2005
CPU:       Single core AMD Athlon 64 3200+ (-UP-) cache: 512 KB flags: (lm nx pae sse sse2 sse3) bmips: 1999.98 clocked at 1000.00 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV710 [Radeon HD 4350/4550] bus-ID: 01:00.0
           X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
           GLX Renderer: Gallium 0.4 on AMD RV710 GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card-1: Advanced Micro Devices [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-2: Advanced Micro Devices [AMD/ATI] IXP SB400 AC'97 Audio Controller driver: snd_atiixp bus-ID: 00:14.5
           Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic
Network:   Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter driver: 8139too ver: 0.9.28 port: de00 bus-ID: 02:0b.0
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 80.0GB (13.8% used) 1: id: /dev/sda model: SAMSUNG_HD080HJ size: 80.0GB
Partition: ID: / size: 72G used: 11G (16%) fs: ext4 ID: swap-1 size: 1.61GB used: 0.02GB (1%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 46.0C mobo: N/A gpu: 43.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 166 Uptime: 41 min Memory: 543.0/1510.5MB Runlevel: 2 Gcc sys: 4.8.4
           Client: Shell (bash 4.3.11) inxi: 1.9.17


[Butterfly]

Önce common uzantılı paketi kurmayı deneyin.

[mehmethanifi]

hocam kurulumu yapıyor şuanda.. sonucu bildireceğim.