Bu çıktıyı 3.19.2 çekirdeği altında aldım. Bu çekirdekte şu ana kadar böyle bir sıkıntı da olmadı. Eğer gerekiyorsa diğer çekirdekte tekrar alayım.
[ 752.236638] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 752.236888] [DEBUG]optirun version 3.2.1 starting...
[ 752.236894] [DEBUG]Active configuration:
[ 752.236896] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 752.236897] [DEBUG] X display: :8
[ 752.236899] [DEBUG] LD_LIBRARY_PATH:
[ 752.236900] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 752.236902] [DEBUG] Accel/display bridge: auto
[ 752.236904] [DEBUG] VGL Compression: proxy
[ 752.236905] [DEBUG] VGLrun extra options:
[ 752.236907] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 752.236971] [ERROR]No bridge found. Try installing primus or virtualgl.
[ 752.236975] [DEBUG]Killing all remaining processes.
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
cat: /etc/X11/xorg.conf: No such file or directory
ii bumblebee 3.2.1-5 amd64 NVIDIA Optimus support for Linux
ii bumblebee-nvidia 3.2.1-5 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-304 304.125-0ubuntu0.0.1 amd64 NVIDIA legacy binary driver - version 304.125
ii nvidia-current 304.125-0ubuntu0.0.1 amd64 Transitional package for nvidia-current
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
menuentry_id_option=""
export menuentry_id_option
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.19.2-031902-generic (/dev/sda6)' --class ubuntu --class gnu-linux --class gnu --class os {
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.19.2-031902-generic (/dev/sda6) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.16.0-30-generic (/dev/sda6)' --class ubuntu --class gnu-linux --class gnu --class os {
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.16.0-30-generic (/dev/sda6) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda6)' --class ubuntu --class gnu-linux --class gnu --class os {
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda6) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-A43F-4D5F' {
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
