maalesef ben prime uygulamasından vazgeçip bumblebee kullanmaya karar verdim.sanırım onda da problem yaşıyorum
o konuda yardımcı olabilirseniz çok sevinirim.istenilen çıktıları paylaşayım ben isterseniz.
optirun -vvv glxgears
[ 403.350652] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 403.350820] [INFO]Configured driver: nvidia
[ 403.350902] [DEBUG]optirun version 3.2.1 starting...
[ 403.350907] [DEBUG]Active configuration:
[ 403.350909] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 403.350911] [DEBUG] X display: :8
[ 403.350912] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-352:/usr/lib32/nvidia-352
[ 403.350914] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 403.350915] [DEBUG] Accel/display bridge: auto
[ 403.350917] [DEBUG] VGL Compression: proxy
[ 403.350919] [DEBUG] VGLrun extra options:
[ 403.350920] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 403.350945] [DEBUG]Using auto-detected bridge primus
[ 404.403127] [INFO]Response: Yes. X is active.
[ 404.403140] [INFO]Running application using primus.
[ 404.403230] [DEBUG]Process glxgears started, PID 3170.
294 frames in 5.0 seconds = 58.764 FPS
301 frames in 5.0 seconds = 60.035 FPS
301 frames in 5.0 seconds = 60.034 FPS
301 frames in 5.0 seconds = 60.034 FPS
301 frames in 5.0 seconds = 60.036 FPS
301 frames in 5.0 seconds = 60.035 FPS
301 frames in 5.0 seconds = 60.035 FPS
cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-352
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-352:/usr/lib32/nvidia-352
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-352/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
ii bumblebee 3.2.1-5+xedgers14.04.1 amd64 NVIDIA Optimus support for Linux
ii bumblebee-nvidia 3.2.1-5+xedgers14.04.1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-352 352.30-0ubuntu0~xedgers14.04.1 amd64 NVIDIA binary driver - version 352.30
rc nvidia-prime 0.6.2linuxmint1 amd64 Tools to enable NVIDIA's Prime
rc nvidia-prime-applet 1.0.3 all An applet for NVIDIA Prime
ii nvidia-settings 346.72-0ubuntu1 amd64 Tool for configuring the NVIDIA graphics driver
rc prime-indicator 0.1-1+git20150211~webupd8~1 all PRIME Indicator
ii primus 0~20131127-2 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 0~20131127-2 amd64 Shared libraries for primus
ii primus-libs:i386 0~20131127-2 i386 Shared libraries for primus
ii primus-libs-ia32 0~20131127-2 i386 Shared libraries for primus (32-bit)
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev ff)
