optirun glxgears
komutunu çalıştırdığımda şöyle bir çıktı alıyorum:
[ 3112.726520] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 3112.726556] [ERROR]Aborting because fallback start is disabled.
optirun -vvv glxgears komutu çıktısı:
[ 3290.719587] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 3290.719881] [DEBUG]optirun version 3.2.1 starting...
[ 3290.719889] [DEBUG]Active configuration:
[ 3290.719891] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 3290.719893] [DEBUG] X display: :8
[ 3290.719895] [DEBUG] LD_LIBRARY_PATH:
[ 3290.719897] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 3290.719899] [DEBUG] Accel/display bridge: auto
[ 3290.719900] [DEBUG] VGL Compression: proxy
[ 3290.719902] [DEBUG] VGLrun extra options:
[ 3290.719905] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 3290.719939] [DEBUG]Using auto-detected bridge virtualgl
[ 3290.720104] [INFO]Response: No - error: Could not load GPU driver
[ 3290.720113] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 3290.720116] [DEBUG]Socket closed.
[ 3290.720127] [ERROR]Aborting because fallback start is disabled.
[ 3290.720134] [DEBUG]Killing all remaining processes.
cat /etc/bumblebee/bumblebee.conf komutu çıktıs:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
# (See also the driver-specific sections below)
Driver=nvidia
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-375
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-375:/usr/lib32/nvidia-375
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-375/xorg,/usr/lib/xorg/modules
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
cat /etc/bumblebee/xorg.conf.nvidia çıktısı:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
cat /etc/X11/xorg.conf çıktısı:
cat: /etc/X11/xorg.conf: No such file or directory
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl' çıktısı:
ii bumblebee 3.2.1-98~xenialppa1 amd64 NVIDIA Optimus support for Linux
ii bumblebee-nvidia 3.2.1-98~xenialppa1 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-375 375.66-0ubuntu0~gpu16.04.1 amd64 NVIDIA binary driver - version 375.66
ii nvidia-prime-applet 1.0.6 all An applet for NVIDIA Prime
ii nvidia-settings 381.22-0ubuntu0~gpu16.04.1 amd64 Tool for configuring the NVIDIA graphics driver
ii primus 20150328-3~xenialppa2 amd64 client-side GPU offloading for NVIDIA Optimus
ii primus-libs:amd64 20150328-3~xenialppa2 amd64 Shared libraries for primus
ii primus-libs:i386 20150328-3~xenialppa2 i386 Shared libraries for primus
ii primus-libs-ia32:i386 20150328-3~xenialppa2 i386 Shared libraries for primus (32-bit)
ii virtualgl 2.4.1-1~xenialppa1 amd64 Toolkit for displaying OpenGL applications to thin clients
ii virtualgl-libs:amd64 2.4.1-1~xenialppa1 amd64 Library files for virtualgl
lspci | egrep 'VGA|3D|Display' çıktısı:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce 920M] (rev a1)
