Gönderen Konu: [Çözüldü] Sistem Donma Sorunu  (Okunma sayısı 14812 defa)

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
[Çözüldü] Sistem Donma Sorunu
« : 09 Mayıs 2015, 16:07:17 »
Firefox'ta video izlerken ya da Wireless açma-kapama butonuna basınca sistem donuyor. Sıklıkla ikincisinde oluyor bu. Güç düğmesinden sistemi kapatana kadar da düzelmiyor.

Kod: [Seç]
System:    Host: bunyo-X550JK Kernel: 3.19.2-031902-generic x86_64 (64 bit, gcc: 4.6.3)
           Desktop: Gnome Distro: Linux Mint 17.1 Rebecca
Machine:   Mobo: ASUSTeK model: X550JK version: 1.0 Bios: American Megatrends version: X550JK.302 date: 07/09/2014
CPU:       Dual core Intel Core i5-4200H CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11174.8
           Clock Speeds: 1: 2909.812 MHz 2: 3039.312 MHz 3: 1605.296 MHz 4: 1603.656 MHz
Graphics:  Card: Intel 4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0
           X.Org: 1.15.1 drivers: (unloaded: fbdev,vesa) FAILED: nouveau,intel Resolution: 1366x768@60.0hz
           GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0
           Card-2: Intel 8 Series/C220 Series Chipset High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture ver: k3.19.2-031902-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 ver: 2.3LK-NAPI port: d000 bus-ID: 04:00.1
           IF: eth0 state: down mac: 54:a0:50:c7:93:4b
           Card-2: Broadcom BCM43142 802.11b/g/n driver: wl bus-ID: 03:00.0
           IF: eth1 state: up mac: 30:10:b3:1e:c8:38
Drives:    HDD Total Size: 500.1GB (28.8% used) 1: id: /dev/sda model: HGST_HTS545050A7 size: 500.1GB
Partition: ID: / size: 96G used: 11G (12%) fs: ext4 ID: swap-1 size: 2.10GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 42.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 187 Uptime: 9 min Memory: 803.4/7867.6MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4

Edit: Az önce video izlerken de aynı şeyi yaşadım.
« Son Düzenleme: 18 Haziran 2015, 11:57:11 Gönderen: Scipio »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #1 : 09 Mayıs 2015, 19:05:30 »
Aşağıdaki komutun çıktısını paylaşınız.

Kod: [Seç]
glxinfo | grep render
Grafik sürücüsü ile ilgili bir sorun olabilir, masaüstü Cinnamon mu?
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
Ynt: Sistem Donma Sorunu
« Yanıtla #2 : 10 Mayıs 2015, 10:24:30 »
Kod: [Seç]
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
Evet masaüstü Cinnamon. Genellikle Wireless butonunda yaşıyorum amabu sorunu. Daha demin sistem yeni açılmış olduğu halde oldu mesela.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #3 : 11 Mayıs 2015, 08:42:46 »
Burada anlatıldığı biçimde günlük PPA deposundan geliştirici sürümü (şu an itibariyle 2.5 sürüm) yüklemeyi deneyebilirsiniz. Sorun devam ederse konuda önceki sürüme nasıl dönüleceği ile ilgili açıklama da mevcut.
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
Ynt: Sistem Donma Sorunu
« Yanıtla #4 : 11 Mayıs 2015, 14:32:11 »
Malesef işe yaramadı. Az önce yine aynı şeyi yaşadım.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #5 : 11 Mayıs 2015, 15:04:04 »
Yine kablosuz ağı kapatıp açarken mi oluştu sorun? Kablosuz ağ aygıtını sistem çekmecesindeki simgeden mi yoksa klavye kısayolu ile mi kapatıp açıyorsunuz?
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
Ynt: Sistem Donma Sorunu
« Yanıtla #6 : 12 Mayıs 2015, 13:58:04 »
Panel üzerindeki uygulama aracılığı ile kapatıyorum.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #7 : 12 Mayıs 2015, 14:29:33 »
Kablosuz ağı aşağıdaki komut ile pasifleştirince bir sorun yaşanıyor mu?

Kod: [Seç]
sudo rfkill block wifi
Kablosuz ağı tekrar etkinleştirmek aşağıdaki komut kullanılabilir.

Kod: [Seç]
sudo rfkill unblock wifi
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
Ynt: Sistem Donma Sorunu
« Yanıtla #8 : 12 Mayıs 2015, 16:27:21 »
Her deneyişimde olmuyor. O yüzden komutları da 10-15 sefer denedim. Herhangi bir kilitlenme olmadı. Soruna panel uygulamacığı sebep oluyormuş gibi duruyor ama onunla hiç ilgilenmeden sadece film izlediğim vakitlerde de aynı şeyi yaşadığım oldu.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #9 : 12 Mayıs 2015, 17:03:43 »
Peki bu kilitlenme sorunu sırasında Nvidia GPU etkin oluyor mu?

Çıktıları bir bakalım.

Kod: [Seç]
optirun -vvv glxgears
cat /etc/bumblebee/bumblebee.conf
cat /etc/bumblebee/xorg.conf.nvidia
cat /etc/X11/xorg.conf
dpkg -l | egrep 'nvidia|bumblebee|primus|prime'
lspci | egrep 'VGA|3D|Display'
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
Ynt: Sistem Donma Sorunu
« Yanıtla #10 : 12 Mayıs 2015, 17:08:07 »
Kod: [Seç]
[ 3263.642139] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 3263.642440] [INFO]Configured driver: nvidia
[ 3263.642613] [DEBUG]optirun version 3.2.1 starting...
[ 3263.642623] [DEBUG]Active configuration:
[ 3263.642626] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 3263.642629] [DEBUG] X display: :8
[ 3263.642632] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-346:/usr/lib32/nvidia-346
[ 3263.642635] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 3263.642639] [DEBUG] Accel/display bridge: auto
[ 3263.642642] [DEBUG] VGL Compression: proxy
[ 3263.642645] [DEBUG] VGLrun extra options:
[ 3263.642648] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 3263.642714] [DEBUG]Using auto-detected bridge virtualgl
[ 3266.323155] [INFO]Response: Yes. X is active.

[ 3266.323166] [INFO]Running application using virtualgl.
[ 3266.323238] [DEBUG]Process vglrun started, PID 4801.
10287 frames in 5.0 seconds = 2057.397 FPS
10432 frames in 5.0 seconds = 2086.376 FPS
10383 frames in 5.0 seconds = 2076.568 FPS
10322 frames in 5.0 seconds = 2064.250 FPS
10190 frames in 5.0 seconds = 2037.894 FPS
[VGL] ERROR: in readback--
[VGL]    247: Window has been deleted by window manager
[ 3295.542850] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 3295.542892] [DEBUG]Socket closed.
[ 3295.542907] [DEBUG]Killing all remaining processes.
Kod: [Seç]
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-346
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-346:/usr/lib32/nvidia-346
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-346/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Kod: [Seç]
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
Kod: [Seç]
cat: /etc/X11/xorg.conf: No such file or directory
Kod: [Seç]
ii  bumblebee                                   3.2.1-90~trustyppa1                                 amd64        NVIDIA Optimus support
ii  bumblebee-nvidia                            3.2.1-90~trustyppa1                                 amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
rc  nvidia-304                                  304.125-0ubuntu0.0.1                                amd64        NVIDIA legacy binary driver - version 304.125
ii  nvidia-346                                  346.59-0ubuntu0~xedgers14.04.1                      amd64        NVIDIA binary driver - version 346.59
ii  nvidia-settings                             346.47-0ubuntu1~xedgers14.04.1                      amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                      20131127-1~trustyppa1                               amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                           20131127-1~trustyppa1                               amd64        Shared libraries for primus
ii  primus-libs:i386                            20131127-1~trustyppa1                               i386         Shared libraries for primus
ii  primus-libs-ia32                            20131127-1~trustyppa1                               i386         Shared libraries for primus (32-bit)
Kod: [Seç]
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev ff)

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #11 : 12 Mayıs 2015, 17:16:21 »
Aşağıdaki komut ile nvidia-304 paketinisistemden kaldırabilirsiniz.

Kod: [Seç]
sudo apt-get purge nvidia-304
Bumblebee ile ilgili sorun görünmüyor.

Kilitlenme sorunu Nvidia GPU'yu etkinleştirerek çalıştırdığınız bir uygulama açıkken mi oluyor.
Örneğin Firefox, VLC gibi bir uygulamayı Nvidia GPU ile mi başlatıyorsunuz?
Eğer öyle ise bu uygulamaları Intel GPU ile çalıştırdığınızda donma sorununun olup olmadığını kontrol eder misiniz?
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Scipio

  • Penguen
  • ***
  • İleti: 353
Ynt: Sistem Donma Sorunu
« Yanıtla #12 : 12 Mayıs 2015, 17:26:41 »
Yok hayır zaten Nvidia'yı çok nadir kullanıyorum. Yine de Firefox ve VLC'yi kontrol ettim. Komut satırlarında falan Nvidia ile ilgili bir şey
gözükmüyor.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #13 : 12 Mayıs 2015, 17:39:08 »
Çekirdek sürümünü güncellemeyi deneyelim.

Kod: [Seç]
mkdir linux-3.19.8 && cd linux-3.19.8
Kod: [Seç]
wget -c --no-check-certificate kernel.ubuntu.com/~kernel-ppa/mainline/v3.19.8-vivid/linux-headers-3.19.8-031908-generic_3.19.8-031908.201505110938_amd64.deb
Kod: [Seç]
wget -c --no-check-certificate kernel.ubuntu.com/~kernel-ppa/mainline/v3.19.8-vivid/linux-headers-3.19.8-031908_3.19.8-031908.201505110938_all.deb
Kod: [Seç]
wget -c --no-check-certificate kernel.ubuntu.com/~kernel-ppa/mainline/v3.19.8-vivid/linux-image-3.19.8-031908-generic_3.19.8-031908.201505110938_amd64.deb
Kod: [Seç]
sudo dpkg -i  *.deb
Firefox'da video hızlandırma ayarları pasif mi?

http://forum.linuxmint.net.tr/index.php?topic=1156.msg6860#msg6860
http://forum.linuxmint.net.tr/index.php?topic=2776.msg17766#msg17766

Video seyretmek için VLC'yi mi kullanıyorsunuz?
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • Guru
  • *****
  • İleti: 18863
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 20 & LMDE 4
  • Masaüstü Ortamı: Cinnamon 4.6 & Xfce 4.14
  • Grafik Kartı: Nvidia GF 9500
  • İşlemci: AMD X3
Ynt: Sistem Donma Sorunu
« Yanıtla #14 : 12 Mayıs 2015, 18:21:06 »
Bir de paneldeki kablosuz ağ uygulamacığının bir özelliği geldi aklıma, Cinnamon'da istenirse klasik kipdeki ağ uygulmacığı kullanılabiliyor. Bunun için ağ uygulamacığına sağ tıklayıp "Bu uygulamacığı sil" seçeneği ile mevcut ağ uygulamacığını kaldırınız. Böyle yapınca sistem çekmesine otomatik olarak Gnome 2'den (ya da Mate) alışık olduğumuz uygulamacık geliyor. Bakalım bununla sorun olacak mı?
Elimizden geldiğince dilimizin döndüğünce...

[info] Konu Açarken Dikkat Edilmesi Gerekenler  |  Forum Kuralları  |  Kod Etiketi Kullanımı[/info]